Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# EuroPi Probapoly - A polyrhythmic gate generator with probabilty
Probapoly
author: Nik Ansell (github.com/gamecat69)
date: 2022-07-24
labels: sequencer, performance, gates, polyrhythm, probability
Probapoly creates interesting polyrhythmic gate patterns while also allowing probabilities to be set on gates.
Given values for and upper and lower rhythmic ratios, Probapoly will create a looping pattern as short as possible with no repetition of the pattern within the loop.
Outputs 1,2 and 3 output gates based on the upper rhythmic ratio. Outputs 4,5 and 6 output gates based on the lower rhythmic ratio.
Outputs 1 and 4 always have a probability of 100%. Outputs 2 and 5 have a default probability of 50%. Outputs 3 and 6 have a default probability of 25%.
digital_in: Clock input
analog_in: Different mode, adjusted by setting self.ainMode as follows:
- Mode 1: Analogue input toggles double time feature
- Mode 2: Analogue input voltage adjusts the upper poly value
- [default] Mode 3: Analogue input voltage adjusts the probabilities of outputs 2,3,5,6 sending gates
button_1:
Short press (<500ms): Reduce pattern length (using manual pattern length is ON).
Long Press (>500ms): Toggle doubletime feature
button_2:
Short press (<500ms): Reduce pattern length (using manual pattern length is ON).
Long Press (>500ms): Toggle Manual pattern length feature
knob_1: Select upper polyrhythm value
knob_2: Select lower polyrhythm value
output_1: Gate upper polyrhythm
output_2: Gate upper polyrhythm (50% probability)
output_3: Gate upper polyrhythm (25% probability)
output_4: Gate lower polyrhythm
output_5: Gate lower polyrhythm (50% probability)
output_6: Gate lower polyrhythm (50% probability)
Demo video: https://www.youtube.com/watch?v=Rflmr2yJYG0
# Display
Top Row: Upper ratio value, output 2 probability, output 3 probability
Bottom Row: Lower ratio value, output 5 probability, output 6 probability
Top right: current step / pattern length
# Getting Started
The following sections provide instructions for using Probapoly to create some interesting rhythms.
## Initial Connections
1. Connect a 50% duty cycle gate / clock to the Digital input
2. (Optional) Connect a CV source to the analogue input (0 to +5V works best)
3. Connect each output (1 to 6) to modules you want to send gates to
## Creating Polyrhythms
1. Use knob 1 to set the upper ratio and knob 2 to set the lower ratio. Changing these values will cause Probapoly to update the gate patterns in real-time.
The value of the upper and lower values determine the frequency of a gate output based on the incoming clock. A value of 1 will output a gate every 1 clock trigger, a value of 3 will output a gate every 3 clock triggers.
Outputs 1,2 and 3 use the same rhythm, but with probabilities of 100, 50 and 25% respectively.
Outputs 4,5 and 6 use the same rhythm, but with probabilities of 100, 50 and 25% respectively.
See below for some examples.
### 1:$ Four to the floor
upper: 1
lower: 4
automatically calculated pattern length: 4
### 2:3 Hemiola
upper: 2
lower: 3
automatically calculated pattern length: 6
### 4:3 Four over Three (Pass the god damn butter)
upper: 4
lower: 3
automatically calculated pattern length: 12
### 16:15
upper: 16
lower: 15
automatically calculated pattern length: 240
# Example patches
## Polyrhythmic percussion with probabilistic decay and FX movement
This patch will create a polyrhythm with two percussive elements. On 50% of the gates, the kick and tom decay will be changed. On 25% of the gates an FX module will have it's parameters tweaked.
- Connect output 1 to some percussion element (e.g. a kick)
- Connect output 2 to an envelope, connect the envelope to the kick decay
- Connect output 3 to an envelope, connect the envelop to wet/dry CV input on an FX module
- Connect output 4 to some percussion element (e.g. a tom)
- Connect output 5 to an envelope, connect the envelope to the tom decay
- Connect output 6 to an envelope, connect the envelop to another CV input on an FX module
- Set the upper value to 4
- Set the lower value to 3
## Polyrhythmic melodies
This patch uses the polyrythmic gates to advance sequencer clocks
- Connect output 1 to the clock input of sequencer 1
- Connect output 4 to the clock input of sequencer 2
- Create a short (e.g. 4) pattern on both sequencers
- Adjust the upper and lower values manually or during a performance to created interesting and fluid polyrhythmic melodiesfb8a53c8dThis file is pinned to the selected release. Download the original to open it in your design tool.