Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2018 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Stream arbiter: Arbitrates a parametrizable number of input streams (i.e., valid-ready
// handshaking with dependency rules as in AXI4) to a single output stream. Once `oup_valid_o` is
// asserted, `oup_data_o` remains invariant until the output handshake has occurred. The
// arbitration scheme is fair round-robin tree, see `rr_arb_tree` for details.
module stream_arbiter_flushable #(
parameter type DATA_T = logic, // Vivado requires a default value for type parameters.
parameter integer N_INP = -1, // Synopsys DC requires a default value for parameters.
parameter ARBITER = "rr" // "rr" or "prio"
) (
input logic clk_i,
input logic rst_ni,
input logic flush_i,
input DATA_T [N_INP-1:0] inp_data_i,
input logic [N_INP-1:0] inp_valid_i,
output logic [N_INP-1:0] inp_ready_o,
output DATA_T oup_data_o,
output logic oup_valid_o,
input logic oup_ready_i
);
if (ARBITER == "rr") begin : gen_rr_arb
rr_arb_tree #(
.NumIn (N_INP),
.DataType (DATA_T),
.ExtPrio (1'b0),
.AxiVldRdy (1'b1),
.LockIn (1'b1)
) i_arbiter (
.clk_i,
.rst_ni,
.flush_i,
.rr_i ('0),
.req_i (inp_valid_i),
.gnt_o (inp_ready_o),
.data_i (inp_data_i),
.gnt_i (oup_ready_i),
.req_o (oup_valid_o),
.data_o (oup_data_o),
.idx_o ()
);
end else if (ARBITER == "prio") begin : gen_prio_arb
rr_arb_tree #(
.NumIn (N_INP),
.DataType (DATA_T),
.ExtPrio (1'b1),
.AxiVldRdy (1'b1),
.LockIn (1'b1)
) i_arbiter (
.clk_i,
.rst_ni,
.flush_i,
.rr_i ('0),
.req_i (inp_valid_i),
.gnt_o (inp_ready_o),
.data_i (inp_data_i),
.gnt_i (oup_ready_i),
.req_o (oup_valid_o),
.data_o (oup_data_o),
.idx_o ()
);
end else begin : gen_arb_error
$fatal(1, "Invalid value for parameter 'ARBITER'!");
end
endmodule
5a7cab001This file is pinned to the selected release. Download the original to open it in your design tool.