common_cells

// Copyright (C) 2013-2018 ETH Zurich, University of Bologna
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.

// Author: Manuel Eggimann <meggimann@iis.ee.ethz.ch>

// Description: This module calculates the hamming weight (number of ones) in
// its input vector using a balanced binary adder tree. Recursive instantiation
// is used to build the tree.  Any unsigned INPUT_WIDTH larger or equal 2 is
// legal.  The module pads the signal internally to the next power of two.  The
// output result width is ceil(log2(INPUT_WIDTH))+1.

module popcount #(
    parameter int unsigned INPUT_WIDTH = 256,
    localparam POPCOUNT_WIDTH          = $clog2(INPUT_WIDTH)+1
) (
    input logic [INPUT_WIDTH-1:0]     data_i,
    output logic [POPCOUNT_WIDTH-1:0] popcount_o
);

   localparam int unsigned PADDED_WIDTH = 1 << $clog2(INPUT_WIDTH);

   logic [PADDED_WIDTH-1:0]           padded_input;
   logic [POPCOUNT_WIDTH-2:0]         left_child_result, right_child_result;

   //Zero pad the input to next power of two
   always_comb begin
     padded_input = '0;
     padded_input[INPUT_WIDTH-1:0] = data_i;
   end

   //Recursive instantiation to build binary adder tree
   if (INPUT_WIDTH == 2) begin : leaf_node
     assign left_child_result  = padded_input[1];
     assign right_child_result = padded_input[0];
   end else begin : non_leaf_node
     popcount #(.INPUT_WIDTH(PADDED_WIDTH / 2))
         left_child(
                    .data_i(padded_input[PADDED_WIDTH-1:PADDED_WIDTH/2]),
                    .popcount_o(left_child_result));

     popcount #(.INPUT_WIDTH(PADDED_WIDTH / 2))
         right_child(
                     .data_i(padded_input[PADDED_WIDTH/2-1:0]),
                     .popcount_o(right_child_result));
   end

   //Output assignment
   assign popcount_o = left_child_result + right_child_result;

endmodule : popcount