bullet3

/* gzwrite.c -- zlib functions for writing gzip files
 * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013 Mark Adler
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

#include "gzguts.h"

/* Local functions */
local int gz_init OF((gz_statep));
local int gz_comp OF((gz_statep, int));
local int gz_zero OF((gz_statep, z_off64_t));

/* Initialize state for writing a gzip file.  Mark initialization by setting
   state->size to non-zero.  Return -1 on failure or 0 on success. */
local int gz_init(state)
	gz_statep state;
{
	int ret;
	z_streamp strm = &(state->strm);

	/* allocate input buffer */
	state->in = (unsigned char *)malloc(state->want);
	if (state->in == NULL)
	{
		gz_error(state, Z_MEM_ERROR, "out of memory");
		return -1;
	}

	/* only need output buffer and deflate state if compressing */
	if (!state->direct)
	{
		/* allocate output buffer */
		state->out = (unsigned char *)malloc(state->want);
		if (state->out == NULL)
		{
			free(state->in);
			gz_error(state, Z_MEM_ERROR, "out of memory");
			return -1;
		}

		/* allocate deflate memory, set up for gzip compression */
		strm->zalloc = Z_NULL;
		strm->zfree = Z_NULL;
		strm->opaque = Z_NULL;
		ret = deflateInit2(strm, state->level, Z_DEFLATED,
						   MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
		if (ret != Z_OK)
		{
			free(state->out);
			free(state->in);
			gz_error(state, Z_MEM_ERROR, "out of memory");
			return -1;
		}
	}

	/* mark state as initialized */
	state->size = state->want;

	/* initialize write buffer if compressing */
	if (!state->direct)
	{
		strm->avail_out = state->size;
		strm->next_out = state->out;
		state->x.next = strm->next_out;
	}
	return 0;
}

/* Compress whatever is at avail_in and next_in and write to the output file.
   Return -1 if there is an error writing to the output file, otherwise 0.
   flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
   then the deflate() state is reset to start a new gzip stream.  If gz->direct
   is true, then simply write to the output file without compressing, and
   ignore flush. */
local int gz_comp(state, flush)
	gz_statep state;
int flush;
{
	int ret, got;
	unsigned have;
	z_streamp strm = &(state->strm);

	/* allocate memory if this is the first time through */
	if (state->size == 0 && gz_init(state) == -1)
		return -1;

	/* write directly if requested */
	if (state->direct)
	{
		got = write(state->fd, strm->next_in, strm->avail_in);
		if (got < 0 || (unsigned)got != strm->avail_in)
		{
			gz_error(state, Z_ERRNO, zstrerror());
			return -1;
		}
		strm->avail_in = 0;
		return 0;
	}

	/* run deflate() on provided input until it produces no more output */
	ret = Z_OK;
	do
	{
		/* write out current buffer contents if full, or if flushing, but if
           doing Z_FINISH then don't write until we get to Z_STREAM_END */
		if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
									 (flush != Z_FINISH || ret == Z_STREAM_END)))
		{
			have = (unsigned)(strm->next_out - state->x.next);
			if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
						 (unsigned)got != have))
			{
				gz_error(state, Z_ERRNO, zstrerror());
				return -1;
			}
			if (strm->avail_out == 0)
			{
				strm->avail_out = state->size;
				strm->next_out = state->out;
			}
			state->x.next = strm->next_out;
		}

		/* compress */
		have = strm->avail_out;
		ret = deflate(strm, flush);
		if (ret == Z_STREAM_ERROR)
		{
			gz_error(state, Z_STREAM_ERROR,
					 "internal error: deflate stream corrupt");
			return -1;
		}
		have -= strm->avail_out;
	} while (have);

	/* if that completed a deflate stream, allow another to start */
	if (flush == Z_FINISH)
		deflateReset(strm);

	/* all done, no errors */
	return 0;
}

/* Compress len zeros to output.  Return -1 on error, 0 on success. */
local int gz_zero(state, len)
	gz_statep state;
z_off64_t len;
{
	int first;
	unsigned n;
	z_streamp strm = &(state->strm);

	/* consume whatever's left in the input buffer */
	if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
		return -1;

	/* compress len zeros (len guaranteed > 0) */
	first = 1;
	while (len)
	{
		n = GT_OFF(state->size) || (z_off64_t)state->size > len ? (unsigned)len : state->size;
		if (first)
		{
			memset(state->in, 0, n);
			first = 0;
		}
		strm->avail_in = n;
		strm->next_in = state->in;
		state->x.pos += n;
		if (gz_comp(state, Z_NO_FLUSH) == -1)
			return -1;
		len -= n;
	}
	return 0;
}

/* -- see zlib.h -- */
int ZEXPORT gzwrite(file, buf, len)
	gzFile file;
voidpc buf;
unsigned len;
{
	unsigned put = len;
	gz_statep state;
	z_streamp strm;

	/* get internal structure */
	if (file == NULL)
		return 0;
	state = (gz_statep)file;
	strm = &(state->strm);

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return 0;

	/* since an int is returned, make sure len fits in one, otherwise return
       with an error (this avoids the flaw in the interface) */
	if ((int)len < 0)
	{
		gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
		return 0;
	}

	/* if len is zero, avoid unnecessary operations */
	if (len == 0)
		return 0;

	/* allocate memory if this is the first time through */
	if (state->size == 0 && gz_init(state) == -1)
		return 0;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return 0;
	}

	/* for small len, copy to input buffer, otherwise compress directly */
	if (len < state->size)
	{
		/* copy to input buffer, compress when full */
		do
		{
			unsigned have, copy;

			if (strm->avail_in == 0)
				strm->next_in = state->in;
			have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
			copy = state->size - have;
			if (copy > len)
				copy = len;
			memcpy(state->in + have, buf, copy);
			strm->avail_in += copy;
			state->x.pos += copy;
			buf = (const char *)buf + copy;
			len -= copy;
			if (len && gz_comp(state, Z_NO_FLUSH) == -1)
				return 0;
		} while (len);
	}
	else
	{
		/* consume whatever's left in the input buffer */
		if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
			return 0;

		/* directly compress user buffer to file */
		strm->avail_in = len;
		strm->next_in = (z_const Bytef *)buf;
		state->x.pos += len;
		if (gz_comp(state, Z_NO_FLUSH) == -1)
			return 0;
	}

	/* input was all buffered or compressed (put will fit in int) */
	return (int)put;
}

/* -- see zlib.h -- */
int ZEXPORT gzputc(file, c)
	gzFile file;
int c;
{
	unsigned have;
	unsigned char buf[1];
	gz_statep state;
	z_streamp strm;

	/* get internal structure */
	if (file == NULL)
		return -1;
	state = (gz_statep)file;
	strm = &(state->strm);

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return -1;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return -1;
	}

	/* try writing to input buffer for speed (state->size == 0 if buffer not
       initialized) */
	if (state->size)
	{
		if (strm->avail_in == 0)
			strm->next_in = state->in;
		have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
		if (have < state->size)
		{
			state->in[have] = c;
			strm->avail_in++;
			state->x.pos++;
			return c & 0xff;
		}
	}

	/* no room in buffer or not initialized, use gz_write() */
	buf[0] = c;
	if (gzwrite(file, buf, 1) != 1)
		return -1;
	return c & 0xff;
}

/* -- see zlib.h -- */
int ZEXPORT gzputs(file, str)
	gzFile file;
const char *str;
{
	int ret;
	unsigned len;

	/* write string */
	len = (unsigned)strlen(str);
	ret = gzwrite(file, str, len);
	return ret == 0 && len != 0 ? -1 : ret;
}

#if defined(STDC) || defined(Z_HAVE_STDARG_H)
#include <stdarg.h>

/* -- see zlib.h -- */
int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va)
{
	int size, len;
	gz_statep state;
	z_streamp strm;

	/* get internal structure */
	if (file == NULL)
		return -1;
	state = (gz_statep)file;
	strm = &(state->strm);

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return 0;

	/* make sure we have some buffer space */
	if (state->size == 0 && gz_init(state) == -1)
		return 0;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return 0;
	}

	/* consume whatever's left in the input buffer */
	if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
		return 0;

	/* do the printf() into the input buffer, put length in len */
	size = (int)(state->size);
	state->in[size - 1] = 0;
#ifdef NO_vsnprintf
#ifdef HAS_vsprintf_void
	(void)vsprintf((char *)(state->in), format, va);
	for (len = 0; len < size; len++)
		if (state->in[len] == 0) break;
#else
	len = vsprintf((char *)(state->in), format, va);
#endif
#else
#ifdef HAS_vsnprintf_void
	(void)vsnprintf((char *)(state->in), size, format, va);
	len = strlen((char *)(state->in));
#else
	len = vsnprintf((char *)(state->in), size, format, va);
#endif
#endif

	/* check that printf() results fit in buffer */
	if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
		return 0;

	/* update buffer and position, defer compression until needed */
	strm->avail_in = (unsigned)len;
	strm->next_in = state->in;
	state->x.pos += len;
	return len;
}

int ZEXPORTVA gzprintf(gzFile file, const char *format, ...)
{
	va_list va;
	int ret;

	va_start(va, format);
	ret = gzvprintf(file, format, va);
	va_end(va);
	return ret;
}

#else /* !STDC && !Z_HAVE_STDARG_H */

/* -- see zlib.h -- */
int ZEXPORTVA gzprintf(file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
					   a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
	gzFile file;
const char *format;
int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
{
	int size, len;
	gz_statep state;
	z_streamp strm;

	/* get internal structure */
	if (file == NULL)
		return -1;
	state = (gz_statep)file;
	strm = &(state->strm);

	/* check that can really pass pointer in ints */
	if (sizeof(int) != sizeof(void *))
		return 0;

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return 0;

	/* make sure we have some buffer space */
	if (state->size == 0 && gz_init(state) == -1)
		return 0;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return 0;
	}

	/* consume whatever's left in the input buffer */
	if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
		return 0;

	/* do the printf() into the input buffer, put length in len */
	size = (int)(state->size);
	state->in[size - 1] = 0;
#ifdef NO_snprintf
#ifdef HAS_sprintf_void
	sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
			a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
	for (len = 0; len < size; len++)
		if (state->in[len] == 0) break;
#else
	len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
				  a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
#endif
#else
#ifdef HAS_snprintf_void
	snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
			 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
	len = strlen((char *)(state->in));
#else
	len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
				   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
				   a19, a20);
#endif
#endif

	/* check that printf() results fit in buffer */
	if (len <= 0 || len >= (int)size || state->in[size - 1] != 0)
		return 0;

	/* update buffer and position, defer compression until needed */
	strm->avail_in = (unsigned)len;
	strm->next_in = state->in;
	state->x.pos += len;
	return len;
}

#endif

/* -- see zlib.h -- */
int ZEXPORT gzflush(file, flush)
	gzFile file;
int flush;
{
	gz_statep state;

	/* get internal structure */
	if (file == NULL)
		return -1;
	state = (gz_statep)file;

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return Z_STREAM_ERROR;

	/* check flush parameter */
	if (flush < 0 || flush > Z_FINISH)
		return Z_STREAM_ERROR;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return -1;
	}

	/* compress remaining data with requested flush */
	gz_comp(state, flush);
	return state->err;
}

/* -- see zlib.h -- */
int ZEXPORT gzsetparams(file, level, strategy)
	gzFile file;
int level;
int strategy;
{
	gz_statep state;
	z_streamp strm;

	/* get internal structure */
	if (file == NULL)
		return Z_STREAM_ERROR;
	state = (gz_statep)file;
	strm = &(state->strm);

	/* check that we're writing and that there's no error */
	if (state->mode != GZ_WRITE || state->err != Z_OK)
		return Z_STREAM_ERROR;

	/* if no change is requested, then do nothing */
	if (level == state->level && strategy == state->strategy)
		return Z_OK;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			return -1;
	}

	/* change compression parameters for subsequent input */
	if (state->size)
	{
		/* flush previous input with previous parameters before changing */
		if (strm->avail_in && gz_comp(state, Z_PARTIAL_FLUSH) == -1)
			return state->err;
		deflateParams(strm, level, strategy);
	}
	state->level = level;
	state->strategy = strategy;
	return Z_OK;
}

/* -- see zlib.h -- */
int ZEXPORT gzclose_w(file)
	gzFile file;
{
	int ret = Z_OK;
	gz_statep state;

	/* get internal structure */
	if (file == NULL)
		return Z_STREAM_ERROR;
	state = (gz_statep)file;

	/* check that we're writing */
	if (state->mode != GZ_WRITE)
		return Z_STREAM_ERROR;

	/* check for seek request */
	if (state->seek)
	{
		state->seek = 0;
		if (gz_zero(state, state->skip) == -1)
			ret = state->err;
	}

	/* flush, free memory, and close file */
	if (gz_comp(state, Z_FINISH) == -1)
		ret = state->err;
	if (state->size)
	{
		if (!state->direct)
		{
			(void)deflateEnd(&(state->strm));
			free(state->out);
		}
		free(state->in);
	}
	gz_error(state, Z_OK, NULL);
	free(state->path);
	if (close(state->fd) == -1)
		ret = Z_ERRNO;
	free(state);
	return ret;
}