Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/*
TinyMIDI2CV
Copyright 2023-2024 Beau Sterling (Aether Soundlab)
Hardware config is based on DIY Good Ol’ MIDI to CV by Jan Ostman:
(*) All in the spirit of open-source and open-hardware
Janost 2019 Sweden
The goMIDI2CV interface
http://blog.dspsynth.eu/diy-good-ol-midi-to-cv/
Copyright 2019 DSP Synthesizers Sweden.
This file is part of TinyMIDI2CV.
TinyMIDI2CV is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation, either version 3 of the License, or (at your option)
any later version.
TinyMIDI2CV is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
TinyMIDI2CV. If not, see <https://www.gnu.org/licenses/>.
*/
#include "sysex.h"
#include "midi.h"
#include "cv2.h"
#include "paraphonic.h"
#include "gate.h"
static inline void interpretSysExCommand(volatile uint8_t *sysex_buffer);
#define TM2CV_SYSEX_ID 0x7D // "Special ID" for non-commercial use only
#define TM2CV_DEVICE_ID 0x42 // ASCII * (wild card), could mean anything... eg: life, the universe, and everything
#define SYSEX_BUFFER_SIZE 6
static volatile uint8_t sysex_buffer[SYSEX_BUFFER_SIZE];
static volatile uint8_t sysex_byte_count = 0;
static volatile bool sysex_msg_ok = false;
volatile bool sysex_listen = false;
volatile bool sysex_ignore = false;
void resetSysExBuffer(int max_element)
{
for (int i = 0; i < max_element; ++i) {
sysex_buffer[i] = 0x0;
}
sysex_byte_count = 0;
sysex_ignore = true;
}
void startSysExListener(uint8_t syx)
{
resetSysExBuffer(SYSEX_BUFFER_SIZE);
sysex_listen = true;
sysex_ignore = false;
sysex_msg_ok = false;
handleSysExData(syx);
}
void stopSysExListener(uint8_t syx)
{
handleSysExData(syx);
resetSysExBuffer(SYSEX_BUFFER_SIZE);
sysex_listen = false;
sysex_ignore = false;
sysex_msg_ok = false;
}
void handleSysExData(uint8_t syx)
{
if (!sysex_ignore) {
// check for buffer overflow
if (sysex_byte_count >= SYSEX_BUFFER_SIZE) {
resetSysExBuffer(SYSEX_BUFFER_SIZE);
return; // reset entire buffer and ignore
}
// load buffer with new byte
sysex_buffer[sysex_byte_count++] = syx;
// check to see if message is valid
if (!sysex_msg_ok) {
if (sysex_buffer[0] == 0xF0) { // if valid sysex start byte
if (sysex_byte_count >= 3) {
if (sysex_buffer[SYX_SYXID] == TM2CV_SYSEX_ID &&
sysex_buffer[SYX_DEVID] == TM2CV_DEVICE_ID) { // if valid address
sysex_msg_ok = true;
return; // message ok, load the rest
} else {
resetSysExBuffer(SYSEX_BUFFER_SIZE);
return; // invalid address, reset and ignore buffer
}
} else { return; } // not enough bytes yet
} else {
resetSysExBuffer(SYSEX_BUFFER_SIZE);
return; // invalid start byte, reset and ignore buffer
}
}
}
// interpret sysex message
if (syx == 0xF7 && sysex_msg_ok) { // if current byte is end of message flag
interpretSysExCommand(sysex_buffer);
}
}
static inline void interpretSysExCommand(volatile uint8_t *sysex_buffer)
{
// example message:
// F0 7D 42 03 05 xx... 7F
// means set CV2 mode to CV2_NOTE_INV
// format: START SYXID DEVID CMD VALUE extrastuff? STOP
if (sysex_ignore) return;
uint8_t value = sysex_buffer[SYX_VALUE];
switch(sysex_buffer[SYX_COMMAND]) {
case SYX_SET_CHANNEL:
if (value < 0 || value > 16) break; // 16 = omni
setMIDIChannelFilter(value);
break;
case SYX_SET_CC_FILTER:
if (value < 0 || value > 127) break;
setMIDICCFilter(value);
break;
case SYX_SET_CV2_MODE:
if (value < 0 || value > CV2_MODE_MAX) break;
setCV2Mode(value);
break;
case SYX_SET_PARAPHONIC_MODE:
if (value < 0 || value > PARAPHONIC_MODE_MAX) break;
setParaphonicMode(value);
break;
case SYX_SET_RETRIG_MODE:
if (value < 0 || value > RETRIGGER_MODE_MAX) break;
setRetrigMode(value);
break;
default:
break;
}
}
4b95d5c7bThis file is pinned to the selected release. Download the original to open it in your design tool.