stmbl

COMP(adc);

#define AREF 3.3// analog reference voltage
#define ARES 4096.0// analog resolution, 12 bit

#define R15 1000.0
#define R22 3900.0
#define R21 180.0
#define R19 470.0
#define V_REF 5.0
#define INPUT_REF (V_REF * R21 / (R19 + R21))
#define INPUT_GAIN (R22 / R15 * R21 / (R19 + R21))
#define V_DIFF(ADC) ((ADC/ADC_ANZ/ARES*AREF-INPUT_REF)/INPUT_GAIN)

HAL_PIN(sin) = 0.0;
HAL_PIN(cos) = 0.0;
HAL_PIN(sin3) = 0.0;
HAL_PIN(cos3) = 0.0;

HAL_PIN(res_en) = 0.0;

HAL_PIN(sin_gain) = 1.0;
HAL_PIN(cos_gain) = 1.0;

HAL_PIN(sin_offset) = 0.0;
HAL_PIN(cos_offset) = 0.0;

HAL_PIN(tim2_oc) = 150.0;
HAL_PIN(tim2_rv) = 420.0;

RT(
   float si[PID_WAVES];
   float co[PID_WAVES];
   uint32_t sc[PID_WAVES];

   float s_o = PIN(sin_offset);
   float c_o = PIN(cos_offset);
   float s_g = PIN(sin_gain);
   float c_g = PIN(cos_gain);

   for(int i = 2; i < PID_WAVES; i++){
      sc[i] = 0.0;
      for(int j = 0; j < ADC_ANZ; j++){
         //ADC dual mode puts both channels in one word, right aligned.
         //ugly hack. this works as long as the maximum sum of each channel fits in 16 bits. (up to 16 samples)
         sc[i] += ADC_DMA_Buffer[i * ADC_ANZ + j];
      }
   }

   TIM2->ARR = (int)CLAMP(PIN(tim2_rv), 300, 1000);
   TIM2->CCR3 = (int)CLAMP(PIN(tim2_oc), 0, TIM2->ARR - 1);
   //seperate channels
   for(int i = 2; i < PID_WAVES; i++){
      si[i] = 0.0;
      co[i] = 0.0;
      si[i] += s_g * V_DIFF((sc[i] & 0x0000ffff)) + s_o;
      co[i] += c_g * V_DIFF((sc[i] >> 16)) + c_o;
   }

   PIN(sin3) = si[3];
   PIN(cos3) = co[3];

   if(PIN(res_en) > 0.0){
      PIN(sin) = 0.5 * si[3] - 0.5 * si[2];// + 0.125 * si[1] - 0.125 * si[0];
      PIN(cos) = 0.5 * co[3] - 0.5 * co[2];// + 0.125 * co[1] - 0.125 * co[0];
   }
   else{
      PIN(sin) = 0.5 * si[3] + 0.5 * si[2];// + 0.125 * si[1] - 0.125 * si[0];
      PIN(cos) = 0.5 * co[3] + 0.5 * co[2];
   }

);

ENDCOMP;