stmbl

COMP(enc_fb);

HAL_PIN(res) = 2048.0;
HAL_PIN(ires) = 1024.0;
HAL_PIN(pos) = 0.0;
HAL_PIN(ipos) = 0.0;
HAL_PIN(sin) = 0.0;
HAL_PIN(cos) = 0.0;
HAL_PIN(error) = 0.0;
HAL_PIN(amp) = 0.0;


MEM(int e_res) = 0.0;

INIT(
  GPIO_InitTypeDef GPIO_InitStructure;
  TIM_ICInitTypeDef TIM_ICInitStructure;
  TIM_ICInitStructure.TIM_Channel = TIM_Channel_1 | TIM_Channel_2;
  TIM_ICInitStructure.TIM_ICPolarity = TIM_ICPolarity_BothEdge;
  TIM_ICInitStructure.TIM_ICSelection = TIM_ICSelection_DirectTI;
  TIM_ICInitStructure.TIM_ICPrescaler = TIM_ICPSC_DIV1;
  TIM_ICInitStructure.TIM_ICFilter = 0xF;
  TIM_ICInit(ENC1_TIM, &TIM_ICInitStructure);

  /***************** port 1, quadrature , sin/cos or resolver *********************/
  e_res = (int)PIN(res);
  if(e_res < 1){
	  e_res = 1;
  }
  // enable clocks
  RCC_AHB1PeriphClockCmd(ENC1_A_IO_RCC, ENABLE);
  RCC_AHB1PeriphClockCmd(ENC1_B_IO_RCC, ENABLE);
  RCC_APB1PeriphClockCmd(ENC1_TIM_RCC, ENABLE);

  // pin mode: af
  GPIO_InitStructure.GPIO_Pin = ENC1_A_PIN | ENC1_B_PIN;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
  GPIO_Init(ENC1_A_PORT, &GPIO_InitStructure);

  // pin af -> tim
  GPIO_PinAFConfig(ENC1_A_PORT, ENC1_A_PIN_SOURCE, ENC1_A_AF_SOURCE);
  GPIO_PinAFConfig(ENC1_B_PORT, ENC1_B_PIN_SOURCE, ENC1_B_AF_SOURCE);

  // enc res / turn
  TIM_SetAutoreload(ENC1_TIM, e_res - 1);

  // quad
  TIM_Cmd(ENC1_TIM, DISABLE);
  GPIO_InitStructure.GPIO_Pin = ENC1_A_PIN | ENC1_B_PIN;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
  GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
  GPIO_Init(ENC1_A_PORT, &GPIO_InitStructure);
  TIM_EncoderInterfaceConfig(ENC1_TIM, TIM_EncoderMode_TI12, TIM_ICPolarity_Rising, TIM_ICPolarity_Rising);
  TIM_Cmd(ENC1_TIM, ENABLE);
);

RT(
  float p = 0.0;

  int r = (int)PIN(res);
  if(r < 1){
	  r = 1;
  }

  float ir = PIN(ires);
  if(ir < 1){
	  ir = 1;
  }

  float s = PIN(sin);
  float c = PIN(cos);
  float a = sqrtf(s * s + c * c);

  PIN(amp) = a;
  
  p = mod(TIM_GetCounter(ENC1_TIM) * 2.0f * M_PI / (float)e_res);
  PIN(pos) = p;

  if(a < 0.15){
    PIN(error) = 1.0;
  }
  else{
    PIN(error) = 0.0;
    PIN(ipos) = mod(p + ((int)(ir * mod(atan2f(s, c) * 4.0 + M_PI) / M_PI)) / ir * M_PI / (float)e_res);
  }

  if(e_res != r){
    e_res = r;
    TIM_SetAutoreload(ENC1_TIM, e_res - 1);
  }
);

ENDCOMP;