Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
##
## This MicroPython code is designed for the Adafruit HUZZAH ESP32.
## It fetches data from the Capable Robot Components SenseTemp
## RTD Wing and prints temperatures (in C) it to the debug console.
##
## Temperature data is emitted at approximately 3 Hz.
##
## SenseTemp : https://www.crowdsupply.com/capable-robot-components/sensetemp
##
## MicroPython Imports
import time
import machine
## Local Imports
import adafruit_max31865 as max31865
RTD_NOMINAL = 1000.0 ## Resistance of RTD at 0C
RTD_REFERENCE = 4300.0 ## Value of reference resistor on PCB
## Create Software SPI controller. MAX31865 requires polarity of 0 and phase of 1.
## Currently, the micropython on the ESP32 does not support hardware SPI
sck = machine.Pin( 5, machine.Pin.OUT)
mosi = machine.Pin(18, machine.Pin.IN)
miso = machine.Pin(19, machine.Pin.OUT)
spi = machine.SPI(baudrate=50000, sck=sck, mosi=mosi, miso=miso, polarity=0, phase=1)
## Create SPI Chip Select pins
cs1 = machine.Pin(33, machine.Pin.OUT, value=1)
cs2 = machine.Pin(15, machine.Pin.OUT, value=1)
cs3 = machine.Pin(32, machine.Pin.OUT, value=1)
cs4 = machine.Pin(14, machine.Pin.OUT, value=1)
css = [cs1, cs2, cs3, cs4]
sensors = []
idx = 0
## Create array of active RTD sensors and information about them
for cs in css:
idx += 1
sensors.append(
max31865.MAX31865(
spi, css[idx-1],
wires = 4,
rtd_nominal = RTD_NOMINAL,
ref_resistor = RTD_REFERENCE)
)
def timestamp():
return float(time.ticks_ms()) / 1000.0
boot_time = timestamp()
while True:
data = [timestamp() - boot_time] + [sensor.temperature for sensor in sensors]
print(','.join(map(str,data)))
ccd81f98fThis file is pinned to the selected release. Download the original to open it in your design tool.