Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
ccd81f98fThis file is pinned to the selected release. Download the original to open it in your design tool.
##
## This MicroPython code is designed for the Adafruit HUZZAH ESP32.
## It fetches data from the Capable Robot Components SenseTemp
## RTD Wing and prints temperatures (in C) it to the debug console.
##
## Temperature data is emitted at approximately 3 Hz.
##
## SenseTemp : https://www.crowdsupply.com/capable-robot-components/sensetemp
##
## MicroPython Imports
import time
import machine
## Local Imports
import adafruit_max31865 as max31865
RTD_NOMINAL = 1000.0 ## Resistance of RTD at 0C
RTD_REFERENCE = 4300.0 ## Value of reference resistor on PCB
## Create Software SPI controller. MAX31865 requires polarity of 0 and phase of 1.
## Currently, the micropython on the ESP32 does not support hardware SPI
sck = machine.Pin( 5, machine.Pin.OUT)
mosi = machine.Pin(18, machine.Pin.IN)
miso = machine.Pin(19, machine.Pin.OUT)
spi = machine.SPI(baudrate=50000, sck=sck, mosi=mosi, miso=miso, polarity=0, phase=1)
## Create SPI Chip Select pins
cs1 = machine.Pin(33, machine.Pin.OUT, value=1)
cs2 = machine.Pin(15, machine.Pin.OUT, value=1)
cs3 = machine.Pin(32, machine.Pin.OUT, value=1)
cs4 = machine.Pin(14, machine.Pin.OUT, value=1)
css = [cs1, cs2, cs3, cs4]
sensors = []
idx = 0
## Create array of active RTD sensors and information about them
for cs in css:
idx += 1
sensors.append(
max31865.MAX31865(
spi, css[idx-1],
wires = 4,
rtd_nominal = RTD_NOMINAL,
ref_resistor = RTD_REFERENCE)
)
def timestamp():
return float(time.ticks_ms()) / 1000.0
boot_time = timestamp()
while True:
data = [timestamp() - boot_time] + [sensor.temperature for sensor in sensors]
print(','.join(map(str,data)))