OCCT

// Created on: 2001-02-26
// Created by: Peter KURNEV
// Copyright (c) 2001-2014 OPEN CASCADE SAS
//
// This file is part of Open CASCADE Technology software library.
//
// This library is free software; you can redistribute it and/or modify it under
// the terms of the GNU Lesser General Public License version 2.1 as published
// by the Free Software Foundation, with special exception defined in the file
// OCCT_LGPL_EXCEPTION.txt. Consult the file LICENSE_LGPL_21.txt included in OCCT
// distribution for complete text of the license and disclaimer of any warranty.
//
// Alternatively, this file may be used under the terms of Open CASCADE
// commercial license or contractual agreement.

#include <IntTools_EdgeFace.hxx>

#include <BRep_Tool.hxx>
#include <BRepAdaptor_Surface.hxx>
#include <Geom_Curve.hxx>
#include <Geom_Surface.hxx>
#include <GeomAdaptor_Curve.hxx>
#include <GeomAdaptor_Surface.hxx>
#include <gp_Ax1.hxx>
#include <gp_Circ.hxx>
#include <gp_Cone.hxx>
#include <gp_Cylinder.hxx>
#include <gp_Lin.hxx>
#include <gp_Pln.hxx>
#include <gp_Pnt.hxx>
#include <gp_Torus.hxx>
#include <IntCurveSurface_HInter.hxx>
#include <IntCurveSurface_IntersectionPoint.hxx>
#include <IntTools.hxx>
#include <IntTools_BeanFaceIntersector.hxx>
#include <IntTools_CommonPrt.hxx>
#include <IntTools_Context.hxx>
#include <IntTools_FClass2d.hxx>
#include <IntTools_Range.hxx>
#include <IntTools_Tools.hxx>
#include <Precision.hxx>

#include <algorithm>
static bool IsCoplanar(const BRepAdaptor_Curve&, const BRepAdaptor_Surface&);
static bool IsRadius(const BRepAdaptor_Curve&   aCurve,
                     const BRepAdaptor_Surface& aSurface,
                     const double               aCriteria);

//=================================================================================================

IntTools_EdgeFace::IntTools_EdgeFace()
{
  myFuzzyValue            = Precision::Confusion();
  myIsDone                = false;
  myErrorStatus           = 1;
  myQuickCoincidenceCheck = false;
  myMinDistance           = RealLast();
}

//=================================================================================================

bool IntTools_EdgeFace::IsCoincident()
{
  int    i, iCnt;
  double dT, aT, aD, aT1, aT2, aU, aV;

  gp_Pnt       aP;
  TopAbs_State aState;
  gp_Pnt2d     aP2d;
  //
  GeomAPI_ProjectPointOnSurf& aProjector = myContext->ProjPS(myFace);

  int aNbSeg = 23;
  if (myC.GetType() == GeomAbs_Line && myS.GetType() == GeomAbs_Plane)
  {
    aNbSeg = 2; // Check only three points for Line/Plane intersection
  }

  const double aTresh                   = 0.5;
  const int    aTreshIdxF               = RealToInt((aNbSeg + 1) * 0.25),
            aTreshIdxL                  = RealToInt((aNbSeg + 1) * 0.75);
  const occ::handle<Geom_Surface> aSurf = BRep_Tool::Surface(myFace);

  aT1              = myRange.First();
  aT2              = myRange.Last();
  double aBndShift = 0.01 * (aT2 - aT1);
  // Shifting first and last curve points in order to avoid projection
  // on surface boundary and rejection projection point with minimal distance
  aT1 += aBndShift;
  aT2 -= aBndShift;
  dT = (aT2 - aT1) / aNbSeg;
  //
  bool isClassified = false;
  iCnt              = 0;
  for (i = 0; i <= aNbSeg; ++i)
  {
    aT = aT1 + i * dT;
    aP = myC.Value(aT);
    //
    aProjector.Perform(aP);
    if (!aProjector.IsDone())
    {
      continue;
    }
    //

    aD = aProjector.LowerDistance();
    if (aD > myCriteria)
    {
      if (aD > 100. * myCriteria)
      {
        return false;
      }
      else
      {
        continue;
      }
    }
    //

    ++iCnt;

    // We classify only three points: in the begin, in the
    // end and in the middle of the edge.
    // However, exact middle point (when i == (aNbSeg + 1)/2)
    // can be unprojectable. Therefore, it will not be able to
    // be classified. Therefore, points with indexes in
    //[aTreshIdxF, aTreshIdxL] range are made available
    // for classification.
    // isClassified == TRUE if MIDDLE point has been chosen and
    // classified correctly.

    if (((0 < i) && (i < aTreshIdxF)) || ((aTreshIdxL < i) && (i < aNbSeg)))
    {
      continue;
    }

    if (isClassified && (i != aNbSeg))
    {
      continue;
    }

    aProjector.LowerDistanceParameters(aU, aV);
    aP2d.SetX(aU);
    aP2d.SetY(aV);

    IntTools_FClass2d& aClass2d = myContext->FClass2d(myFace);
    aState                      = aClass2d.Perform(aP2d);

    if (aState == TopAbs_OUT)
    {
      return false;
    }

    if (i != 0)
    {
      isClassified = true;
    }
  }
  //
  const double aCoeff = (double)iCnt / ((double)aNbSeg + 1);
  return (aCoeff > aTresh);
}

//=================================================================================================

void IntTools_EdgeFace::CheckData()
{
  if (BRep_Tool::Degenerated(myEdge))
  {
    myErrorStatus = 2;
  }
  if (!BRep_Tool::IsGeometric(myEdge))
  {
    myErrorStatus = 3;
  }
}

//=================================================================================================

bool IntTools_EdgeFace::IsProjectable(const double aT) const
{
  bool   bFlag;
  gp_Pnt aPC;
  //
  myC.D0(aT, aPC);
  bFlag = myContext->IsValidPointForFace(aPC, myFace, myCriteria);
  //
  return bFlag;
}

//=================================================================================================

double IntTools_EdgeFace::DistanceFunction(const double t)
{
  double aD;

  //
  gp_Pnt P;
  myC.D0(t, P);
  //
  bool bIsEqDistance;

  bIsEqDistance = IntTools_EdgeFace::IsEqDistance(P, myS, 1.e-7, aD);
  if (bIsEqDistance)
  {
    aD = aD - myCriteria;
    return aD;
  }

  //
  bool bFlag = false;

  GeomAPI_ProjectPointOnSurf& aLocProj = myContext->ProjPS(myFace);
  aLocProj.Perform(P);
  bFlag = aLocProj.IsDone();

  if (bFlag)
  {
    aD = aLocProj.LowerDistance();
  }
  //

  if (!bFlag)
  {
    myErrorStatus = 4;
    return 99.;
  }

  //
  //   aD=aProjector.LowerDistance();
  //
  aD = aD - myCriteria;
  return aD;
}

//
//=================================================================================================

bool IntTools_EdgeFace::IsEqDistance(const gp_Pnt&              aP,
                                     const BRepAdaptor_Surface& aBAS,
                                     const double               aTol,
                                     double&                    aD)
{
  bool bRetFlag = true;

  GeomAbs_SurfaceType aSurfType = aBAS.GetType();

  if (aSurfType == GeomAbs_Cylinder)
  {
    gp_Cylinder   aCyl  = aBAS.Cylinder();
    const gp_Ax1& anAx1 = aCyl.Axis();
    gp_Lin        aLinAxis(anAx1);
    double        aDC, aRadius = aCyl.Radius();
    aDC = aLinAxis.Distance(aP);
    if (aDC < aTol)
    {
      aD = aRadius;
      return bRetFlag;
    }
  }

  if (aSurfType == GeomAbs_Cone)
  {
    gp_Cone       aCone = aBAS.Cone();
    const gp_Ax1& anAx1 = aCone.Axis();
    gp_Lin        aLinAxis(anAx1);
    double        aDC, aRadius, aDS, aSemiAngle;
    aDC = aLinAxis.Distance(aP);
    if (aDC < aTol)
    {
      gp_Pnt anApex = aCone.Apex();
      aSemiAngle    = aCone.SemiAngle();
      aDS           = aP.Distance(anApex);

      aRadius = aDS * tan(aSemiAngle);
      aD      = aRadius;
      return bRetFlag;
    }
  }

  if (aSurfType == GeomAbs_Torus)
  {
    double aMajorRadius, aMinorRadius, aDC;

    gp_Torus aTorus = aBAS.Torus();
    gp_Pnt   aPLoc  = aTorus.Location();
    aMajorRadius    = aTorus.MajorRadius();

    aDC = fabs(aPLoc.Distance(aP) - aMajorRadius);
    if (aDC < aTol)
    {
      aMinorRadius = aTorus.MinorRadius();
      aD           = aMinorRadius;
      return bRetFlag;
    }
  }
  return !bRetFlag;
}

//
//=================================================================================================

int IntTools_EdgeFace::MakeType(IntTools_CommonPrt& aCommonPrt)
{
  double af1, al1;
  double df1, tm;
  bool   bAllNullFlag;
  //
  bAllNullFlag = aCommonPrt.AllNullFlag();
  if (bAllNullFlag)
  {
    aCommonPrt.SetType(TopAbs_EDGE);
    return 0;
  }
  //
  aCommonPrt.Range1(af1, al1);

  {
    gp_Pnt aPF, aPL;
    myC.D0(af1, aPF);
    myC.D0(al1, aPL);
    df1               = aPF.Distance(aPL);
    bool isWholeRange = false;

    if ((std::abs(af1 - myRange.First()) < myC.Resolution(myCriteria))
        && (std::abs(al1 - myRange.Last()) < myC.Resolution(myCriteria)))
    {
      isWholeRange = true;
    }

    if ((df1 > myCriteria * 2.) && isWholeRange)
    {
      aCommonPrt.SetType(TopAbs_EDGE);
    }
    else
    {
      if (isWholeRange)
      {
        tm = (af1 + al1) * 0.5;

        if (aPF.Distance(myC.Value(tm)) > myCriteria * 2.)
        {
          aCommonPrt.SetType(TopAbs_EDGE);
          return 0;
        }
      }

      if (!CheckTouch(aCommonPrt, tm))
      {
        tm = (af1 + al1) * 0.5;
      }
      aCommonPrt.SetType(TopAbs_VERTEX);
      aCommonPrt.SetVertexParameter1(tm);
      aCommonPrt.SetRange1(af1, al1);
    }
  }
  return 0;
}

//=================================================================================================

bool IntTools_EdgeFace::CheckTouch(const IntTools_CommonPrt& aCP, double& aTx)
{
  double aTF, aTL, Tol, U1f, U1l, V1f, V1l, af, al, aDist2, aMinDist2;
  bool   theflag = false;
  int    aNbExt, iLower;

  aCP.Range1(aTF, aTL);

  //
  double aCR;
  aCR = myC.Resolution(myCriteria);
  if ((std::abs(aTF - myRange.First()) < aCR) && (std::abs(aTL - myRange.Last()) < aCR))
  {
    return theflag; // EDGE
  }
  //

  Tol = Precision::PConfusion();

  const occ::handle<Geom_Curve>&   Curve   = BRep_Tool::Curve(myC.Edge(), af, al);
  const occ::handle<Geom_Surface>& Surface = BRep_Tool::Surface(myS.Face());
  //   Surface->Bounds(U1f,U1l,V1f,V1l);
  U1f = myS.FirstUParameter();
  U1l = myS.LastUParameter();
  V1f = myS.FirstVParameter();
  V1l = myS.LastVParameter();

  GeomAdaptor_Curve   TheCurve(Curve, aTF, aTL);
  GeomAdaptor_Surface TheSurface(Surface, U1f, U1l, V1f, V1l);

  Extrema_ExtCS anExtrema(TheCurve, TheSurface, Tol, Tol);

  aDist2 = 1.e100;

  if (anExtrema.IsDone())
  {
    aMinDist2 = aDist2;

    if (!anExtrema.IsParallel())
    {
      aNbExt = anExtrema.NbExt();

      if (aNbExt > 0)
      {
        iLower = 1;
        for (int i = 1; i <= aNbExt; i++)
        {
          aDist2 = anExtrema.SquareDistance(i);
          if (aDist2 < aMinDist2)
          {
            aMinDist2 = aDist2;
            iLower    = i;
          }
        }
        aDist2 = anExtrema.SquareDistance(iLower);
        Extrema_POnCurv aPOnC;
        Extrema_POnSurf aPOnS;
        anExtrema.Points(iLower, aPOnC, aPOnS);
        aTx = aPOnC.Parameter();
      }
      else
      {
        // modified by NIZHNY-MKK  Thu Jul 21 11:35:32 2005.BEGIN
        IntCurveSurface_HInter anExactIntersector;

        occ::handle<GeomAdaptor_Curve>   aCurve   = new GeomAdaptor_Curve(TheCurve);
        occ::handle<GeomAdaptor_Surface> aSurface = new GeomAdaptor_Surface(TheSurface);

        anExactIntersector.Perform(aCurve, aSurface);

        if (anExactIntersector.IsDone())
        {
          for (int i = 1; i <= anExactIntersector.NbPoints(); i++)
          {
            const IntCurveSurface_IntersectionPoint& aPoint = anExactIntersector.Point(i);

            if ((aPoint.W() >= aTF) && (aPoint.W() <= aTL))
            {
              aDist2 = 0.;
              aTx    = aPoint.W();
            }
          }
        }
        // modified by NIZHNY-MKK  Thu Jul 21 11:35:40 2005.END
      }
    }
    else
    {
      return theflag;
    }
  }

  double aBoundaryDist;

  aBoundaryDist = DistanceFunction(aTF) + myCriteria;
  if (aBoundaryDist * aBoundaryDist < aDist2)
  {
    aDist2 = aBoundaryDist * aBoundaryDist;
    aTx    = aTF;
  }

  aBoundaryDist = DistanceFunction(aTL) + myCriteria;
  if (aBoundaryDist * aBoundaryDist < aDist2)
  {
    aDist2 = aBoundaryDist * aBoundaryDist;
    aTx    = aTL;
  }

  double aParameter = (aTF + aTL) * 0.5;
  aBoundaryDist     = DistanceFunction(aParameter) + myCriteria;
  if (aBoundaryDist * aBoundaryDist < aDist2)
  {
    aDist2 = aBoundaryDist * aBoundaryDist;
    aTx    = aParameter;
  }

  if (aDist2 > myCriteria * myCriteria)
  {
    return theflag;
  }

  if (fabs(aTx - aTF) < Precision::PConfusion())
  {
    return !theflag;
  }

  if (fabs(aTx - aTL) < Precision::PConfusion())
  {
    return !theflag;
  }

  if (aTx > aTF && aTx < aTL)
  {
    return !theflag;
  }

  return theflag;
}

//=================================================================================================

void IntTools_EdgeFace::Perform()
{
  int                i, aNb;
  IntTools_CommonPrt aCommonPrt;
  //
  aCommonPrt.SetEdge1(myEdge);
  //
  myErrorStatus = 0;
  CheckData();
  if (myErrorStatus)
  {
    return;
  }
  //
  if (myContext.IsNull())
  {
    myContext = new IntTools_Context;
  }
  //
  myIsDone = false;
  myC.Initialize(myEdge);
  GeomAbs_CurveType aCurveType;
  aCurveType = myC.GetType();
  //
  // Prepare myCriteria
  double aFuzz = myFuzzyValue / 2.;
  double aTolF = BRep_Tool::Tolerance(myFace) + aFuzz;
  double aTolE = BRep_Tool::Tolerance(myEdge) + aFuzz;
  if (aCurveType == GeomAbs_BSplineCurve || aCurveType == GeomAbs_BezierCurve)
  {
    //--- 5112
    double diff1 = (aTolE / aTolF);
    double diff2 = (aTolF / aTolE);
    if (diff1 > 100 || diff2 > 100)
    {
      myCriteria = std::max(aTolE, aTolF);
    }
    else
    { //--- 5112
      myCriteria = 1.5 * aTolE + aTolF;
    }
  }
  else
  {
    myCriteria = aTolE + aTolF;
  }

  myS = myContext->SurfaceAdaptor(myFace);

  if (myQuickCoincidenceCheck)
  {
    if (IsCoincident())
    {
      aCommonPrt.SetType(TopAbs_EDGE);
      aCommonPrt.SetRange1(myRange.First(), myRange.Last());
      mySeqOfCommonPrts.Append(aCommonPrt);
      myIsDone = true;
      return;
    }
  }
  //
  IntTools_BeanFaceIntersector anIntersector(myC, myS, aTolE, aTolF);
  anIntersector.SetBeanParameters(myRange.First(), myRange.Last());
  //
  anIntersector.SetContext(myContext);
  //
  anIntersector.Perform();

  if (anIntersector.MinimalSquareDistance() < RealLast())
  {
    myMinDistance = std::sqrt(anIntersector.MinimalSquareDistance());
  }

  if (!anIntersector.IsDone())
  {
    return;
  }

  for (int r = 1; r <= anIntersector.Result().Length(); r++)
  {
    const IntTools_Range& aRange = anIntersector.Result().Value(r);

    if (IsProjectable(IntTools_Tools::IntermediatePoint(aRange.First(), aRange.Last())))
    {
      aCommonPrt.SetRange1(aRange.First(), aRange.Last());
      mySeqOfCommonPrts.Append(aCommonPrt);
    }
  }

  aNb = mySeqOfCommonPrts.Length();

  for (i = 1; i <= aNb; i++)
  {
    IntTools_CommonPrt& aCP = mySeqOfCommonPrts.ChangeValue(i);
    //
    double aTx1, aTx2;
    gp_Pnt aPx1, aPx2;
    //
    aCP.Range1(aTx1, aTx2);
    myC.D0(aTx1, aPx1);
    myC.D0(aTx2, aPx2);
    aCP.SetBoundingPoints(aPx1, aPx2);
    //
    MakeType(aCP);
  }
  {
    // Line\Cylinder's Common Parts treatment
    GeomAbs_CurveType   aCType;
    GeomAbs_SurfaceType aSType;
    TopAbs_ShapeEnum    aType;
    bool                bIsTouch;
    double              aTx;

    aCType = myC.GetType();
    aSType = myS.GetType();

    if (aCType == GeomAbs_Line && aSType == GeomAbs_Cylinder)
    {
      for (i = 1; i <= aNb; i++)
      {
        IntTools_CommonPrt& aCP = mySeqOfCommonPrts(i);
        aType                   = aCP.Type();
        if (aType == TopAbs_EDGE)
        {
          bIsTouch = CheckTouch(aCP, aTx);
          if (bIsTouch)
          {
            aCP.SetType(TopAbs_VERTEX);
            aCP.SetVertexParameter1(aTx);
            // aCP.SetRange1 (aTx, aTx);
          }
        }
        else if (aType == TopAbs_VERTEX)
        {
          bIsTouch = CheckTouchVertex(aCP, aTx);
          if (bIsTouch)
          {
            aCP.SetVertexParameter1(aTx);
            // aCP.SetRange1 (aTx, aTx);
          }
        }
      }
    }

    // Circle\Plane's Common Parts treatment

    if (aCType == GeomAbs_Circle && aSType == GeomAbs_Plane)
    {
      bool bIsCoplanar, bIsRadius;
      bIsCoplanar = IsCoplanar(myC, myS);
      bIsRadius   = IsRadius(myC, myS, myCriteria);
      if (!bIsCoplanar && !bIsRadius)
      {
        for (i = 1; i <= aNb; i++)
        {
          IntTools_CommonPrt& aCP = mySeqOfCommonPrts(i);
          aType                   = aCP.Type();
          if (aType == TopAbs_EDGE)
          {
            bIsTouch = CheckTouch(aCP, aTx);
            if (bIsTouch)
            {
              aCP.SetType(TopAbs_VERTEX);
              aCP.SetVertexParameter1(aTx);
              // aCP.SetRange1 (aTx, aTx);
            }
          }
          else if (aType == TopAbs_VERTEX)
          {
            bIsTouch = CheckTouchVertex(aCP, aTx);
            if (bIsTouch)
            {
              aCP.SetVertexParameter1(aTx);
              // aCP.SetRange1 (aTx, aTx);
            }
          }
        }
      }
    }
  }
  myIsDone = true;
}

//=================================================================================================

bool IntTools_EdgeFace::CheckTouchVertex(const IntTools_CommonPrt& aCP, double& aTx)
{
  double            aTF, aTL, Tol, U1f, U1l, V1f, V1l;
  double            aEpsT, af, al, aDist2, aMinDist2, aTm, aDist2New;
  bool              theflag = false;
  int               aNbExt, i, iLower;
  GeomAbs_CurveType aType;
  //
  aCP.Range1(aTF, aTL);
  aType = myC.GetType();
  //
  aEpsT = 8.e-5;
  if (aType == GeomAbs_Line)
  {
    aEpsT = 9.e-5;
  }
  //
  aTm    = 0.5 * (aTF + aTL);
  aDist2 = DistanceFunction(aTm);
  aDist2 *= aDist2;

  Tol = Precision::PConfusion();

  const occ::handle<Geom_Curve>&   Curve   = BRep_Tool::Curve(myC.Edge(), af, al);
  const occ::handle<Geom_Surface>& Surface = BRep_Tool::Surface(myS.Face());

  Surface->Bounds(U1f, U1l, V1f, V1l);

  GeomAdaptor_Curve   TheCurve(Curve, aTF, aTL);
  GeomAdaptor_Surface TheSurface(Surface, U1f, U1l, V1f, V1l);

  Extrema_ExtCS anExtrema(TheCurve, TheSurface, Tol, Tol);

  if (!anExtrema.IsDone())
  {
    return theflag;
  }
  if (anExtrema.IsParallel())
  {
    return theflag;
  }

  aNbExt = anExtrema.NbExt();
  if (!aNbExt)
  {
    return theflag;
  }

  iLower    = 1;
  aMinDist2 = 1.e100;
  for (i = 1; i <= aNbExt; ++i)
  {
    aDist2 = anExtrema.SquareDistance(i);
    if (aDist2 < aMinDist2)
    {
      aMinDist2 = aDist2;
      iLower    = i;
    }
  }

  aDist2New = anExtrema.SquareDistance(iLower);

  if (aDist2New > aDist2)
  {
    aTx = aTm;
    return !theflag;
  }

  if (aDist2New > myCriteria * myCriteria)
  {
    return theflag;
  }

  Extrema_POnCurv aPOnC;
  Extrema_POnSurf aPOnS;
  anExtrema.Points(iLower, aPOnC, aPOnS);

  aTx = aPOnC.Parameter();
  ///
  if (fabs(aTx - aTF) < aEpsT)
  {
    return theflag;
  }

  if (fabs(aTx - aTL) < aEpsT)
  {
    return theflag;
  }

  if (aTx > aTF && aTx < aTL)
  {
    return !theflag;
  }

  return theflag;
}

//=================================================================================================

bool IsCoplanar(const BRepAdaptor_Curve& aCurve, const BRepAdaptor_Surface& aSurface)
{
  bool bFlag = false;

  GeomAbs_CurveType   aCType;
  GeomAbs_SurfaceType aSType;

  aCType = aCurve.GetType();
  aSType = aSurface.GetType();

  if (aCType == GeomAbs_Circle && aSType == GeomAbs_Plane)
  {
    gp_Circ       aCirc   = aCurve.Circle();
    const gp_Ax1& anAx1   = aCirc.Axis();
    const gp_Dir& aDirAx1 = anAx1.Direction();

    gp_Pln        aPln    = aSurface.Plane();
    const gp_Ax1& anAx    = aPln.Axis();
    const gp_Dir& aDirPln = anAx.Direction();

    bFlag = IntTools_Tools::IsDirsCoinside(aDirAx1, aDirPln);
  }
  return bFlag;
}

//=================================================================================================

bool IsRadius(const BRepAdaptor_Curve&   aCurve,
              const BRepAdaptor_Surface& aSurface,
              const double               aCriteria)
{
  bool bFlag = false;

  GeomAbs_CurveType   aCType;
  GeomAbs_SurfaceType aSType;

  aCType = aCurve.GetType();
  aSType = aSurface.GetType();

  if (aCType == GeomAbs_Circle && aSType == GeomAbs_Plane)
  {
    gp_Circ      aCirc   = aCurve.Circle();
    const gp_Pnt aCenter = aCirc.Location();
    double       aR      = aCirc.Radius();
    gp_Pln       aPln    = aSurface.Plane();
    double       aD      = aPln.Distance(aCenter);
    if (fabs(aD - aR) < aCriteria)
    {
      return !bFlag;
    }
  }
  return bFlag;
}

//
//=================================================================================================

int AdaptiveDiscret(const int                  iDiscret,
                    const BRepAdaptor_Curve&   aCurve,
                    const BRepAdaptor_Surface& aSurface)
{
  int iDiscretNew;

  iDiscretNew = iDiscret;

  GeomAbs_SurfaceType aSType;

  aSType = aSurface.GetType();

  if (aSType == GeomAbs_Cylinder)
  {
    double aELength, aRadius, dLR;

    aELength = IntTools::Length(aCurve.Edge());

    gp_Cylinder aCylinder = aSurface.Cylinder();
    aRadius               = aCylinder.Radius();
    dLR                   = 2 * aRadius;

    iDiscretNew = (int)(aELength / dLR);

    if (iDiscretNew < iDiscret)
    {
      iDiscretNew = iDiscret;
    }
  }
  return iDiscretNew;
}