Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
#!/bin/bash
#
# Tests functionality of Launchpad mode
# test sequence:
# 1. send flash and pulse led commands to all side buttons
# 2. send whole palette of colors to grid buttons
# 3. send "clear all buttons" SysEx
# 4. send few "simulate button press" SysEx messages
# 5. receive and check notes for every press
# 6. send some message, which would trigger SysEx transmission from the device
# 7. switch applications, when it becomes possible
readonly device_name='midi-grid'
readonly tempfile='/tmp/launchpad_test.txt'
readonly RED='\033[0;31m'
readonly GREEN='\033[0;32m'
readonly YELLOW='\033[0;33m'
readonly NC='\033[0m' # No Color
init ()
{
echo "Setting the device to Launchpad mode"
sendmidi dev ${device_name} on 88 101 # first midi message might be ignored
if [[ $? -ne 0 ]]; then
return 1
fi
}
pulse_leds ()
{
echo "Setting LEDs to pulse"
for note in {19..89..10}
do
sendmidi dev ${device_name} ch 3 on ${note} 53
if [[ $? -ne 0 ]]; then
return 1
fi
done
}
flash_leds ()
{
echo "Setting LEDs to flash"
for control in {104..111}
do
sendmidi dev ${device_name} ch 2 cc ${control} 9
if [[ $? -ne 0 ]]; then
return 1
fi
done
}
light_palette ()
{
echo "Testing color palette"
color=0
for i in {1..2}
do
note=11
while [[ ${note} -lt 89 ]]
do
sendmidi dev ${device_name} on ${note} ${color}
if [[ $? -ne 0 ]]; then
return 1
fi
((color++))
((note++))
if [[ $((note % 10)) -eq 9 ]]
then
((note+=2))
fi
done
done
sleep 1 # wait to see if LEDs are pulsing
}
sysex_leds_off ()
{
echo "Turning LEDs off through SysEx command"
sendmidi dev ${device_name} syx 00h 20h 29h 02h 18h 0Eh 00h
if [[ $? -ne 0 ]]; then
return 1
fi
}
receive_notes ()
{
echo "Requesting device to send notes"
for x in {0..7}
do
y=3
sendmidi dev ${device_name} syx 00h 20h 29h 02h 07h 00h ${x} ${y}
if [[ $? -ne 0 ]]; then
return 1
fi
receivemidi dev ${device_name} ch 1 nn on > ${tempfile} &
pid=$!
sleep 0.1
kill ${pid}
((note=10*y+x+11))
if [[ "$(<${tempfile})" != *"${note} 127"* ]]; then
return 1
fi
sendmidi dev ${device_name} on ${note} 5
if [[ $? -ne 0 ]]; then
return 1
fi
((note+=10))
sendmidi dev ${device_name} on ${note} 5
if [[ $? -ne 0 ]]; then
return 1
fi
done
}
receive_sysex ()
{
echo "Requesting a SysEx challenge message from the device"
receivemidi dev midi-grid syx > ${tempfile} &
pid=$!
sendmidi dev ${device_name} syx 00h 20h 29h 02h 18h 40h 00h 00h 00h 00h
if [[ $? -ne 0 ]]; then
kill ${pid}
return 1
fi
sleep 0.5
kill ${pid}
if [[ "$(<${tempfile})" != *"00 20 29 02 18 40 00 00"* ]]; then
return 1
fi
}
step=(
"init"
"pulse_leds"
"flash_leds"
"light_palette"
"sysex_leds_off"
"receive_notes"
"receive_sysex"
)
step_index=0
for current_step in "${step[@]}"
do
((step_index++))
printf "${YELLOW}[${step_index}/${#step[@]}]${NC} "
$current_step
if [[ $? -ne 0 ]]; then
echo -e "${RED}Test failed on step ${step_index}${NC}"
exit 1
fi
done
echo -e "${GREEN}Test completed successfully${NC}"
cea3e2f89This file is pinned to the selected release. Download the original to open it in your design tool.