Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
cea3e2f89This file is pinned to the selected release. Download the original to open it in your design tool.
# This is an midi-grid board with a single STM32F411RCTx chip
#
# Generated by System Workbench for STM32
# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select "hla_swd"
set CHIPNAME STM32F411RCTx
set BOARDNAME midi-grid
# Enable debug when in low power modes
set ENABLE_LOW_POWER 1
# Stop Watchdog counters when halt
set STOP_WATCHDOG 1
# STlink Debug clock frequency
set CLOCK_FREQ 8000
# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config none srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]