Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
#include "system/System.hpp"
#include "stm32f4xx_hal.h"
#include "usb/usb_device.h"
namespace mcu
{
System::System()
{
}
void System::initialize()
{
HAL_Init();
configureNvicPriorities();
configureSystemClock();
MX_USB_DEVICE_Init();
}
bool System::isUsbConnected()
{
return (0 != usb_device_isUsbConnected());
}
void System::resetIntoBootloader()
{
// write these bytes into the end of RAM, so processor would jump into bootloader after reset
// (there is conditional in system_stm32f4xx.c that checks for this value at the beginning of a program)
*((unsigned long *)0x2001FFF0) = 0xDEADBEEF;
// Reset the processor
NVIC_SystemReset();
}
void System::configureNvicPriorities()
{
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
// System interrupt init
// MemoryManagement_IRQn interrupt configuration
HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0);
// BusFault_IRQn interrupt configuration
HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0);
// UsageFault_IRQn interrupt configuration
HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0);
// SVCall_IRQn interrupt configuration
HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0);
// DebugMonitor_IRQn interrupt configuration
HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0);
// PendSV_IRQn interrupt configuration
HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
// SysTick_IRQn interrupt configuration
HAL_NVIC_SetPriority(SysTick_IRQn, 15, 0);
}
void System::configureSystemClock()
{
static RCC_OscInitTypeDef RCC_OscInitStruct;
static RCC_ClkInitTypeDef RCC_ClkInitStruct;
// Configure the main internal regulator output voltage
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
// Initializes the CPU, AHB and APB busses clocks
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 8;
RCC_OscInitStruct.PLL.PLLN = 192;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 4;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
// Initializes the CPU, AHB and APB busses clocks
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
// Configure the Systick interrupt time
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
// Configure the Systick
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
}
} // namespace mcu
// overridden HAL function, standard implementation of which does not work because of disabled interrupts
extern uint32_t SystemCoreClock;
extern "C" void HAL_Delay(uint32_t Delay)
{
const uint64_t delayCycles = (Delay * SystemCoreClock) / 1000;
uint64_t i = 0;
while (i < delayCycles)
{
i++;
}
}
cea3e2f89This file is pinned to the selected release. Download the original to open it in your design tool.