Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# This is an midi-grid board with a single STM32F411RCTx chip
#
# Generated by System Workbench for STM32
# Take care that such file, as generated, may be overridden without any early notice. Please have a look to debug launch configuration setup(s)
source [find interface/stlink-v2.cfg]
set WORKAREASIZE 0x8000
transport select "hla_swd"
set CHIPNAME STM32F411RCTx
set BOARDNAME midi-grid
# Enable debug when in low power modes
set ENABLE_LOW_POWER 1
# Stop Watchdog counters when halt
set STOP_WATCHDOG 1
# STlink Debug clock frequency
set CLOCK_FREQ 8000
# use hardware reset, connect under reset
# connect_assert_srst needed if low power mode application running (WFI...)
reset_config none srst_nogate connect_assert_srst
set CONNECT_UNDER_RESET 1
source [find target/stm32f4x.cfg]
9317196ccThis file is pinned to the selected release. Download the original to open it in your design tool.