Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
//*****************************************************************************
//
// hw_sysctl.h - Macros used when accessing the system control hardware.
//
// Copyright (c) 2005-2013 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.1 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_SYSCTL_H__
#define __HW_SYSCTL_H__
//*****************************************************************************
//
// The following are defines for the System Control register addresses.
//
//*****************************************************************************
#define SYSCTL_DID0 0x400FE000 // Device Identification 0
#define SYSCTL_DID1 0x400FE004 // Device Identification 1
#define SYSCTL_DC0 0x400FE008 // Device Capabilities 0
#define SYSCTL_DC1 0x400FE010 // Device Capabilities 1
#define SYSCTL_DC2 0x400FE014 // Device Capabilities 2
#define SYSCTL_DC3 0x400FE018 // Device Capabilities 3
#define SYSCTL_DC4 0x400FE01C // Device Capabilities 4
#define SYSCTL_DC5 0x400FE020 // Device Capabilities 5
#define SYSCTL_DC6 0x400FE024 // Device Capabilities 6
#define SYSCTL_DC7 0x400FE028 // Device Capabilities 7
#define SYSCTL_DC8 0x400FE02C // Device Capabilities 8 ADC
// Channels
#define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control
#define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0
#define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1
#define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2
#define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status
#define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control
#define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and
// Clear
#define SYSCTL_RESC 0x400FE05C // Reset Cause
#define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration
#define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus
// Control
#define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2
#define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control
#define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control
// Register 0
#define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control
// Register 1
#define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control
// Register 2
#define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control
// Register 0
#define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control
// Register 1
#define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control
// Register 2
#define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating
// Control Register 0
#define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating
// Control Register 1
#define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating
// Control Register 2
#define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration
#define SYSCTL_SYSPROP 0x400FE14C // System Properties
#define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator
// Calibration
#define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator
// Statistics
#define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0
#define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency 1
#define SYSCTL_PLLSTAT 0x400FE168 // PLL Status
#define SYSCTL_DC9 0x400FE190 // Device Capabilities 9 ADC
// Digital Comparators
#define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information
#define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral
// Present
#define SYSCTL_PPTIMER 0x400FE304 // Timer Peripheral Present
#define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output
// Peripheral Present
#define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access
// Peripheral Present
#define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present
#define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous
// Receiver/Transmitter Peripheral
// Present
#define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface
// Peripheral Present
#define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit
// Peripheral Present
#define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral
// Present
#define SYSCTL_PPCAN 0x400FE334 // Controller Area Network
// Peripheral Present
#define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter
// Peripheral Present
#define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral
// Present
#define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral
// Present
#define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface
// Peripheral Present
#define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present
#define SYSCTL_PPWTIMER 0x400FE35C // Wide Timer Peripheral Present
#define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset
#define SYSCTL_SRTIMER 0x400FE504 // Timer Software Reset
#define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output
// Software Reset
#define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access
// Software Reset
#define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset
#define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous
// Receiver/Transmitter Software
// Reset
#define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface
// Software Reset
#define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit
// Software Reset
#define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software
// Reset
#define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software
// Reset
#define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter
// Software Reset
#define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset
#define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software
// Reset
#define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface
// Software Reset
#define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset
#define SYSCTL_SRWTIMER 0x400FE55C // Wide Timer Software Reset
#define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock
// Gating Control
#define SYSCTL_RCGCTIMER 0x400FE604 // Timer Run Mode Clock Gating
// Control
#define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run
// Mode Clock Gating Control
#define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run
// Mode Clock Gating Control
#define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous
// Receiver/Transmitter Run Mode
// Clock Gating Control
#define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run
// Mode Clock Gating Control
#define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run
// Mode Clock Gating Control
#define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode
// Clock Gating Control
#define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode
// Clock Gating Control
#define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run
// Mode Clock Gating Control
#define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock
// Gating Control
#define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode
// Clock Gating Control
#define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run
// Mode Clock Gating Control
#define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating
// Control
#define SYSCTL_RCGCWTIMER 0x400FE65C // Wide Timer Run Mode Clock Gating
// Control
#define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCTIMER 0x400FE704 // Timer Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous
// Receiver/Transmitter Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep
// Mode Clock Gating Control
#define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface
// Sleep Mode Clock Gating Control
#define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCWTIMER 0x400FE75C // Wide Timer Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCTIMER 0x400FE804 // Timer Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous
// Receiver/Transmitter Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep
// Mode Clock Gating Control
#define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface
// Deep-Sleep Mode Clock Gating
// Control
#define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCWTIMER 0x400FE85C // Wide Timer Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready
#define SYSCTL_PRTIMER 0x400FEA04 // Timer Peripheral Ready
#define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output
// Peripheral Ready
#define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access
// Peripheral Ready
#define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready
#define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous
// Receiver/Transmitter Peripheral
// Ready
#define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface
// Peripheral Ready
#define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit
// Peripheral Ready
#define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral
// Ready
#define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network
// Peripheral Ready
#define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter
// Peripheral Ready
#define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral
// Ready
#define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral
// Ready
#define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface
// Peripheral Ready
#define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready
#define SYSCTL_PRWTIMER 0x400FEA5C // Wide Timer Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID0 register.
//
//*****************************************************************************
#define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version
#define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0
// register format
#define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class
#define SYSCTL_DID0_CLASS_BLIZZARD \
0x00050000 // Tiva(TM) C Series Blizzard-class
// microcontrollers
#define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision
#define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device)
#define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer
// revision)
#define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer
// revision)
#define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision
#define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major
// revision update
#define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change
#define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DID1 register.
//
//*****************************************************************************
#define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version
#define SYSCTL_DID1_VER_1 0x10000000 // Second version of the DID1
// register format
#define SYSCTL_DID1_FAM_M 0x0F000000 // Family
#define SYSCTL_DID1_FAM_TIVA 0x00000000 // Tiva family of microcontollers
#define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number
#define SYSCTL_DID1_PRTNO_TM4C1230C3PM \
0x00220000 // TM4C1230C3PM
#define SYSCTL_DID1_PRTNO_TM4C1230D5PM \
0x00230000 // TM4C1230D5PM
#define SYSCTL_DID1_PRTNO_TM4C1230E6PM \
0x00200000 // TM4C1230E6PM
#define SYSCTL_DID1_PRTNO_TM4C1230H6PM \
0x00210000 // TM4C1230H6PM
#define SYSCTL_DID1_PRTNO_TM4C1231C3PM \
0x00180000 // TM4C1231C3PM
#define SYSCTL_DID1_PRTNO_TM4C1231D5PM \
0x00190000 // TM4C1231D5PM
#define SYSCTL_DID1_PRTNO_TM4C1231D5PZ \
0x00360000 // TM4C1231D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1231E6PM \
0x00100000 // TM4C1231E6PM
#define SYSCTL_DID1_PRTNO_TM4C1231E6PZ \
0x00300000 // TM4C1231E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1231H6PGE \
0x00350000 // TM4C1231H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1231H6PM \
0x00110000 // TM4C1231H6PM
#define SYSCTL_DID1_PRTNO_TM4C1231H6PZ \
0x00310000 // TM4C1231H6PZ
#define SYSCTL_DID1_PRTNO_TM4C1232C3PM \
0x00080000 // TM4C1232C3PM
#define SYSCTL_DID1_PRTNO_TM4C1232D5PM \
0x00090000 // TM4C1232D5PM
#define SYSCTL_DID1_PRTNO_TM4C1232E6PM \
0x000A0000 // TM4C1232E6PM
#define SYSCTL_DID1_PRTNO_TM4C1232H6PM \
0x000B0000 // TM4C1232H6PM
#define SYSCTL_DID1_PRTNO_TM4C1233C3PM \
0x00010000 // TM4C1233C3PM
#define SYSCTL_DID1_PRTNO_TM4C1233D5PM \
0x00020000 // TM4C1233D5PM
#define SYSCTL_DID1_PRTNO_TM4C1233D5PZ \
0x00D00000 // TM4C1233D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1233E6PM \
0x00030000 // TM4C1233E6PM
#define SYSCTL_DID1_PRTNO_TM4C1233E6PZ \
0x00D10000 // TM4C1233E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1233H6PGE \
0x00D60000 // TM4C1233H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1233H6PM \
0x00040000 // TM4C1233H6PM
#define SYSCTL_DID1_PRTNO_TM4C1233H6PZ \
0x00D20000 // TM4C1233H6PZ
#define SYSCTL_DID1_PRTNO_TM4C1236D5PM \
0x00520000 // TM4C1236D5PM
#define SYSCTL_DID1_PRTNO_TM4C1236E6PM \
0x00500000 // TM4C1236E6PM
#define SYSCTL_DID1_PRTNO_TM4C1236H6PM \
0x00510000 // TM4C1236H6PM
#define SYSCTL_DID1_PRTNO_TM4C1237D5PM \
0x00480000 // TM4C1237D5PM
#define SYSCTL_DID1_PRTNO_TM4C1237D5PZ \
0x00660000 // TM4C1237D5PZ
#define SYSCTL_DID1_PRTNO_TM4C1237E6PM \
0x00400000 // TM4C1237E6PM
#define SYSCTL_DID1_PRTNO_TM4C1237E6PZ \
0x00600000 // TM4C1237E6PZ
#define SYSCTL_DID1_PRTNO_TM4C1237H6PGE \
0x00650000 // TM4C1237H6PGE
#define SYSCTL_DID1_PRTNO_TM4C1237H6PM \
0x00410000 // TM4C1237H6PM
#define SYSCTL_DID1_PRTNO_TM4C1237H6PZ \
0x00610000 // TM4C1237H6PZ
#define SYSCTL_DID1_PRTNO_TM4C123AE6PM \
0x00800000 // TM4C123AE6PM
#define SYSCTL_DID1_PRTNO_TM4C123AH6PM \
0x00830000 // TM4C123AH6PM
#define SYSCTL_DID1_PRTNO_TM4C123BE6PM \
0x00700000 // TM4C123BE6PM
#define SYSCTL_DID1_PRTNO_TM4C123BE6PZ \
0x00C30000 // TM4C123BE6PZ
#define SYSCTL_DID1_PRTNO_TM4C123BH6PGE \
0x00C60000 // TM4C123BH6PGE
#define SYSCTL_DID1_PRTNO_TM4C123BH6PM \
0x00730000 // TM4C123BH6PM
#define SYSCTL_DID1_PRTNO_TM4C123BH6PZ \
0x00C40000 // TM4C123BH6PZ
#define SYSCTL_DID1_PRTNO_TM4C123BH6ZRB \
0x00E90000 // TM4C123BH6ZRB
#define SYSCTL_DID1_PRTNO_TM4C123FE6PM \
0x00B00000 // TM4C123FE6PM
#define SYSCTL_DID1_PRTNO_TM4C123FH6PM \
0x00B10000 // TM4C123FH6PM
#define SYSCTL_DID1_PRTNO_TM4C123GE6PM \
0x00A00000 // TM4C123GE6PM
#define SYSCTL_DID1_PRTNO_TM4C123GE6PZ \
0x00C00000 // TM4C123GE6PZ
#define SYSCTL_DID1_PRTNO_TM4C123GH6PGE \
0x00C50000 // TM4C123GH6PGE
#define SYSCTL_DID1_PRTNO_TM4C123GH6PM \
0x00A10000 // TM4C123GH6PM
#define SYSCTL_DID1_PRTNO_TM4C123GH6PZ \
0x00C10000 // TM4C123GH6PZ
#define SYSCTL_DID1_PRTNO_TM4C123GH6ZRB \
0x00E30000 // TM4C123GH6ZRB
#define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count
#define SYSCTL_DID1_PINCNT_28 0x00000000 // 28-pin package
#define SYSCTL_DID1_PINCNT_48 0x00002000 // 48-pin package
#define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin package
#define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin package
#define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin package
#define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin package
#define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range
#define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range (0C
// to 70C)
#define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range
// (-40C to 85C)
#define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range (-40C
// to 105C)
#define SYSCTL_DID1_PKG_M 0x00000018 // Package Type
#define SYSCTL_DID1_PKG_SOIC 0x00000000 // SOIC package
#define SYSCTL_DID1_PKG_QFP 0x00000008 // LQFP package
#define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package
#define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance
#define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status
#define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified)
#define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified)
#define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC0 register.
//
//*****************************************************************************
#define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size
#define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM
#define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM
#define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size
#define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash
#define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash
#define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash
#define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash
#define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash
#define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash
#define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash
#define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC1 register.
//
//*****************************************************************************
#define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present
#define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present
#define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present
#define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present
#define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present
#define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present
#define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present
#define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider
#define SYSCTL_DC1_MINSYSDIV_100 \
0x00001000 // Divide VCO (400MHZ) by 5 minimum
#define SYSCTL_DC1_MINSYSDIV_66 0x00002000 // Divide VCO (400MHZ) by 2*2 + 2 =
// 6 minimum
#define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock
// with a PLL divider of 4
#define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock
// with a PLL divider of 5
#define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a
// PLL divider of 8
#define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a
// PLL divider of 10
#define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed
#define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second
#define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second
#define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second
#define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second
#define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed
#define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second
#define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second
#define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second
#define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second
#define SYSCTL_DC1_MPU 0x00000080 // MPU Present
#define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present
#define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present
#define SYSCTL_DC1_PLL 0x00000010 // PLL Present
#define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present
#define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present
#define SYSCTL_DC1_SWD 0x00000002 // SWD Present
#define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC2 register.
//
//*****************************************************************************
#define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present
#define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present
#define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present
#define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present
#define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present
#define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present
#define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present
#define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present
#define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present
#define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed
#define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present
#define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed
#define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present
#define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present
#define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present
#define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present
#define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present
#define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present
#define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present
#define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC3 register.
//
//*****************************************************************************
#define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available
#define SYSCTL_DC3_CCP5 0x20000000 // CCP5 Pin Present
#define SYSCTL_DC3_CCP4 0x10000000 // CCP4 Pin Present
#define SYSCTL_DC3_CCP3 0x08000000 // CCP3 Pin Present
#define SYSCTL_DC3_CCP2 0x04000000 // CCP2 Pin Present
#define SYSCTL_DC3_CCP1 0x02000000 // CCP1 Pin Present
#define SYSCTL_DC3_CCP0 0x01000000 // CCP0 Pin Present
#define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present
#define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present
#define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present
#define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present
#define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present
#define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present
#define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present
#define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present
#define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present
#define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present
#define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present
#define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present
#define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present
#define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present
#define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present
#define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present
#define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC4 register.
//
//*****************************************************************************
#define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present
#define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present
#define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable
#define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate
#define SYSCTL_DC4_CCP7 0x00008000 // CCP7 Pin Present
#define SYSCTL_DC4_CCP6 0x00004000 // CCP6 Pin Present
#define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present
#define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present
#define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present
#define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present
#define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present
#define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present
#define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present
#define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present
#define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present
#define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present
#define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC5 register.
//
//*****************************************************************************
#define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present
#define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present
#define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present
#define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present
#define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active
#define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active
#define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present
#define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present
#define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present
#define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present
#define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present
#define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present
#define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present
#define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC6 register.
//
//*****************************************************************************
#define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present
#define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present
#define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only
#define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host
#define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC7 register.
//
//*****************************************************************************
#define SYSCTL_DC7_DMACH30 0x40000000 // SW
#define SYSCTL_DC7_DMACH29 0x20000000 // I2S0_TX / CAN1_TX
#define SYSCTL_DC7_DMACH28 0x10000000 // I2S0_RX / CAN1_RX
#define SYSCTL_DC7_DMACH27 0x08000000 // CAN1_TX / ADC1_SS3
#define SYSCTL_DC7_DMACH26 0x04000000 // CAN1_RX / ADC1_SS2
#define SYSCTL_DC7_DMACH25 0x02000000 // SSI1_TX / ADC1_SS1
#define SYSCTL_DC7_DMACH24 0x01000000 // SSI1_RX / ADC1_SS0
#define SYSCTL_DC7_DMACH23 0x00800000 // UART1_TX / CAN2_TX
#define SYSCTL_DC7_DMACH22 0x00400000 // UART1_RX / CAN2_RX
#define SYSCTL_DC7_DMACH21 0x00200000 // Timer1B / EPI0_WFIFO
#define SYSCTL_DC7_DMACH20 0x00100000 // Timer1A / EPI0_NBRFIFO
#define SYSCTL_DC7_DMACH19 0x00080000 // Timer0B / Timer1B
#define SYSCTL_DC7_DMACH18 0x00040000 // Timer0A / Timer1A
#define SYSCTL_DC7_DMACH17 0x00020000 // ADC0_SS3
#define SYSCTL_DC7_DMACH16 0x00010000 // ADC0_SS2
#define SYSCTL_DC7_DMACH15 0x00008000 // ADC0_SS1 / Timer2B
#define SYSCTL_DC7_DMACH14 0x00004000 // ADC0_SS0 / Timer2A
#define SYSCTL_DC7_DMACH13 0x00002000 // CAN0_TX / UART2_TX
#define SYSCTL_DC7_DMACH12 0x00001000 // CAN0_RX / UART2_RX
#define SYSCTL_DC7_DMACH11 0x00000800 // SSI0_TX / SSI1_TX
#define SYSCTL_DC7_DMACH10 0x00000400 // SSI0_RX / SSI1_RX
#define SYSCTL_DC7_DMACH9 0x00000200 // UART0_TX / UART1_TX
#define SYSCTL_DC7_DMACH8 0x00000100 // UART0_RX / UART1_RX
#define SYSCTL_DC7_DMACH7 0x00000080 // ETH_TX / Timer2B
#define SYSCTL_DC7_DMACH6 0x00000040 // ETH_RX / Timer2A
#define SYSCTL_DC7_DMACH5 0x00000020 // USB_EP3_TX / Timer2B
#define SYSCTL_DC7_DMACH4 0x00000010 // USB_EP3_RX / Timer2A
#define SYSCTL_DC7_DMACH3 0x00000008 // USB_EP2_TX / Timer3B
#define SYSCTL_DC7_DMACH2 0x00000004 // USB_EP2_RX / Timer3A
#define SYSCTL_DC7_DMACH1 0x00000002 // USB_EP1_TX / UART2_TX
#define SYSCTL_DC7_DMACH0 0x00000001 // USB_EP1_RX / UART2_RX
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC8 register.
//
//*****************************************************************************
#define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present
#define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present
#define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present
#define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present
#define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present
#define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present
#define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present
#define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present
#define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present
#define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present
#define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present
#define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present
#define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present
#define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present
#define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present
#define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present
#define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present
#define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present
#define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present
#define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present
#define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present
#define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present
#define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present
#define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present
#define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present
#define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present
#define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present
#define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present
#define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present
#define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present
#define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present
#define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PBORCTL register.
//
//*****************************************************************************
#define SYSCTL_PBORCTL_BOR0 0x00000004 // VDD under BOR0 Event Action
#define SYSCTL_PBORCTL_BOR1 0x00000002 // VDD under BOR1 Event Action
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR0 register.
//
//*****************************************************************************
#define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control
#define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control
#define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control
#define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control
#define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control
#define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control
#define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control
#define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR1 register.
//
//*****************************************************************************
#define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control
#define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control
#define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control
#define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control
#define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control
#define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control
#define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control
#define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control
#define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control
#define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control
#define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control
#define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control
#define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control
#define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control
#define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control
#define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCR2 register.
//
//*****************************************************************************
#define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control
#define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control
#define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control
#define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control
#define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control
#define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control
#define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control
#define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control
#define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control
#define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control
#define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RIS register.
//
//*****************************************************************************
#define SYSCTL_RIS_VDDARIS 0x00000400 // VDDA Power OK Event Raw
// Interrupt Status
#define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt
// Status
#define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt
// Status
#define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status
#define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Fault Raw
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_IMC register.
//
//*****************************************************************************
#define SYSCTL_IMC_VDDAIM 0x00000400 // VDDA Power OK Interrupt Mask
#define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask
#define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask
#define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask
#define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Fault Interrupt
// Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MISC register.
//
//*****************************************************************************
#define SYSCTL_MISC_VDDAMIS 0x00000400 // VDDA Power OK Masked Interrupt
// Status
#define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt
// Status
#define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt
// Status
#define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status
#define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Fault Masked
// Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RESC register.
//
//*****************************************************************************
#define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset
#define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset
#define SYSCTL_RESC_SW 0x00000010 // Software Reset
#define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset
#define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset
#define SYSCTL_RESC_POR 0x00000002 // Power-On Reset
#define SYSCTL_RESC_EXT 0x00000001 // External Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC register.
//
//*****************************************************************************
#define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating
#define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor
#define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider
#define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor
#define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor
#define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2
#define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4
#define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8
#define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16
#define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32
#define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64
#define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down
#define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass
#define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value
#define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz
#define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz
#define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz
#define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz
#define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz
#define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz
#define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz
#define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz
#define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz
#define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz
#define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz
#define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz
#define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz
#define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz
#define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz
#define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz
#define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz
#define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz
#define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz
#define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz
#define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz
#define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source
#define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC
#define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC
#define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4
#define SYSCTL_RCC_OSCSRC_30 0x00000030 // 30 kHz
#define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable
#define SYSCTL_RCC_SYSDIV_S 23
#define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_GPIOHBCTL
// register.
//
//*****************************************************************************
#define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance
// Bus
#define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance
// Bus
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCC2 register.
//
//*****************************************************************************
#define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2
#define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200
// MHz
#define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2
#define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2
#define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL
#define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2
#define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2
#define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2
#define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC
#define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC
#define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4
#define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // 30 kHz
#define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz
#define SYSCTL_RCC2_SYSDIV2_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_MOSCCTL register.
//
//*****************************************************************************
#define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected
#define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action
#define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC0 register.
//
//*****************************************************************************
#define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed
#define SYSCTL_RCGC0_ADC1SPD_125K \
0x00000000 // 125K samples/second
#define SYSCTL_RCGC0_ADC1SPD_250K \
0x00000400 // 250K samples/second
#define SYSCTL_RCGC0_ADC1SPD_500K \
0x00000800 // 500K samples/second
#define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second
#define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed
#define SYSCTL_RCGC0_ADC0SPD_125K \
0x00000000 // 125K samples/second
#define SYSCTL_RCGC0_ADC0SPD_250K \
0x00000100 // 250K samples/second
#define SYSCTL_RCGC0_ADC0SPD_500K \
0x00000200 // 500K samples/second
#define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second
#define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC1 register.
//
//*****************************************************************************
#define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGC2 register.
//
//*****************************************************************************
#define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC0 register.
//
//*****************************************************************************
#define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed
#define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC1 register.
//
//*****************************************************************************
#define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGC2 register.
//
//*****************************************************************************
#define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC0 register.
//
//*****************************************************************************
#define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control
#define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control
#define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control
#define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control
#define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control
#define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control
#define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control
#define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC1 register.
//
//*****************************************************************************
#define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating
#define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating
#define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating
#define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control
#define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control
#define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control
#define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control
#define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control
#define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control
#define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control
#define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control
#define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control
#define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control
#define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control
#define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control
#define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGC2 register.
//
//*****************************************************************************
#define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control
#define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control
#define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control
#define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control
#define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control
#define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control
#define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control
#define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control
#define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control
#define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control
#define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG
// register.
//
//*****************************************************************************
#define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override
#define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source
#define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC
#define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC
#define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // 30 kHz
#define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz
#define SYSCTL_DSLPCLKCFG_D_S 23
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SYSPROP register.
//
//*****************************************************************************
#define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCCAL
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value
#define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration
#define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim
#define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value
#define SYSCTL_PIOSCCAL_UT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PIOSCSTAT
// register.
//
//*****************************************************************************
#define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value
#define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result
#define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been
// attempted
#define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation
// completed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation
// failed to meet 1% accuracy
#define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value
#define SYSCTL_PIOSCSTAT_DT_S 16
#define SYSCTL_PIOSCSTAT_CT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ0
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value
#define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value
#define SYSCTL_PLLFREQ0_MFRAC_S 10
#define SYSCTL_PLLFREQ0_MINT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLFREQ1
// register.
//
//*****************************************************************************
#define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value
#define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value
#define SYSCTL_PLLFREQ1_Q_S 8
#define SYSCTL_PLLFREQ1_N_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PLLSTAT register.
//
//*****************************************************************************
#define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DC9 register.
//
//*****************************************************************************
#define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present
#define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present
#define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present
#define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present
#define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present
#define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present
#define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present
#define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present
#define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present
#define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present
#define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present
#define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present
#define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present
#define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present
#define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present
#define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_NVMSTAT register.
//
//*****************************************************************************
#define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer
// Active
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWD register.
//
//*****************************************************************************
#define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present
#define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPTIMER register.
//
//*****************************************************************************
#define SYSCTL_PPTIMER_P5 0x00000020 // Timer 5 Present
#define SYSCTL_PPTIMER_P4 0x00000010 // Timer 4 Present
#define SYSCTL_PPTIMER_P3 0x00000008 // Timer 3 Present
#define SYSCTL_PPTIMER_P2 0x00000004 // Timer 2 Present
#define SYSCTL_PPTIMER_P1 0x00000002 // Timer 1 Present
#define SYSCTL_PPTIMER_P0 0x00000001 // Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPGPIO register.
//
//*****************************************************************************
#define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present
#define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present
#define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present
#define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present
#define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present
#define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present
#define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present
#define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present
#define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present
#define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present
#define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present
#define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present
#define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present
#define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present
#define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPDMA register.
//
//*****************************************************************************
#define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPHIB register.
//
//*****************************************************************************
#define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUART register.
//
//*****************************************************************************
#define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present
#define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present
#define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present
#define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present
#define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present
#define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present
#define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present
#define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPSSI register.
//
//*****************************************************************************
#define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present
#define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present
#define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present
#define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPI2C register.
//
//*****************************************************************************
#define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present
#define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present
#define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present
#define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present
#define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present
#define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPUSB register.
//
//*****************************************************************************
#define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPCAN register.
//
//*****************************************************************************
#define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present
#define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPADC register.
//
//*****************************************************************************
#define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present
#define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPACMP register.
//
//*****************************************************************************
#define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPPWM register.
//
//*****************************************************************************
#define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present
#define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPQEI register.
//
//*****************************************************************************
#define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present
#define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PPWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PPWTIMER_P5 0x00000020 // Wide Timer 5 Present
#define SYSCTL_PPWTIMER_P4 0x00000010 // Wide Timer 4 Present
#define SYSCTL_PPWTIMER_P3 0x00000008 // Wide Timer 3 Present
#define SYSCTL_PPWTIMER_P2 0x00000004 // Wide Timer 2 Present
#define SYSCTL_PPWTIMER_P1 0x00000002 // Wide Timer 1 Present
#define SYSCTL_PPWTIMER_P0 0x00000001 // Wide Timer 0 Present
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWD register.
//
//*****************************************************************************
#define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset
#define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRTIMER register.
//
//*****************************************************************************
#define SYSCTL_SRTIMER_R5 0x00000020 // Timer 5 Software Reset
#define SYSCTL_SRTIMER_R4 0x00000010 // Timer 4 Software Reset
#define SYSCTL_SRTIMER_R3 0x00000008 // Timer 3 Software Reset
#define SYSCTL_SRTIMER_R2 0x00000004 // Timer 2 Software Reset
#define SYSCTL_SRTIMER_R1 0x00000002 // Timer 1 Software Reset
#define SYSCTL_SRTIMER_R0 0x00000001 // Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRGPIO register.
//
//*****************************************************************************
#define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset
#define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset
#define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset
#define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset
#define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset
#define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset
#define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset
#define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset
#define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset
#define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset
#define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset
#define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset
#define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset
#define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset
#define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRDMA register.
//
//*****************************************************************************
#define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRHIB register.
//
//*****************************************************************************
#define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software
// Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUART register.
//
//*****************************************************************************
#define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset
#define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset
#define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset
#define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset
#define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset
#define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset
#define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset
#define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRSSI register.
//
//*****************************************************************************
#define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset
#define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset
#define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset
#define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRI2C register.
//
//*****************************************************************************
#define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset
#define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset
#define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset
#define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset
#define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset
#define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRUSB register.
//
//*****************************************************************************
#define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRCAN register.
//
//*****************************************************************************
#define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset
#define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRADC register.
//
//*****************************************************************************
#define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset
#define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRACMP register.
//
//*****************************************************************************
#define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0
// Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRPWM register.
//
//*****************************************************************************
#define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset
#define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRQEI register.
//
//*****************************************************************************
#define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset
#define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SRWTIMER_R5 0x00000020 // Wide Timer 5 Software Reset
#define SYSCTL_SRWTIMER_R4 0x00000010 // Wide Timer 4 Software Reset
#define SYSCTL_SRWTIMER_R3 0x00000008 // Wide Timer 3 Software Reset
#define SYSCTL_SRWTIMER_R2 0x00000004 // Wide Timer 2 Software Reset
#define SYSCTL_SRWTIMER_R1 0x00000002 // Wide Timer 1 Software Reset
#define SYSCTL_SRWTIMER_R0 0x00000001 // Wide Timer 0 Software Reset
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWD register.
//
//*****************************************************************************
#define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCTIMER_R5 0x00000020 // Timer 5 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCTIMER_R4 0x00000010 // Timer 4 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCTIMER_R3 0x00000008 // Timer 3 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCTIMER_R2 0x00000004 // Timer 2 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCTIMER_R1 0x00000002 // Timer 1 Run Mode Clock Gating
// Control
#define SYSCTL_RCGCTIMER_R0 0x00000001 // Timer 0 Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock
// Gating Control
#define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCADC register.
//
//*****************************************************************************
#define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_RCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_RCGCWTIMER_R5 0x00000020 // Wide Timer 5 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWTIMER_R4 0x00000010 // Wide Timer 4 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWTIMER_R3 0x00000008 // Wide Timer 3 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWTIMER_R2 0x00000004 // Wide Timer 2 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWTIMER_R1 0x00000002 // Wide Timer 1 Run Mode Clock
// Gating Control
#define SYSCTL_RCGCWTIMER_R0 0x00000001 // Wide Timer 0 Run Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWD register.
//
//*****************************************************************************
#define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode
// Clock Gating Control
#define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCTIMER_S5 0x00000020 // Timer 5 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S4 0x00000010 // Timer 4 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S3 0x00000008 // Timer 3 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S2 0x00000004 // Timer 2 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S1 0x00000002 // Timer 1 Sleep Mode Clock Gating
// Control
#define SYSCTL_SCGCTIMER_S0 0x00000001 // Timer 0 Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCADC register.
//
//*****************************************************************************
#define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_SCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_SCGCWTIMER_S5 0x00000020 // Wide Timer 5 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCWTIMER_S4 0x00000010 // Wide Timer 4 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCWTIMER_S3 0x00000008 // Wide Timer 3 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCWTIMER_S2 0x00000004 // Wide Timer 2 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCWTIMER_S1 0x00000002 // Wide Timer 1 Sleep Mode Clock
// Gating Control
#define SYSCTL_SCGCWTIMER_S0 0x00000001 // Wide Timer 0 Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWD register.
//
//*****************************************************************************
#define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCTIMER_D5 0x00000020 // Timer 5 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCTIMER_D4 0x00000010 // Timer 4 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCTIMER_D3 0x00000008 // Timer 3 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCTIMER_D2 0x00000004 // Timer 2 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCTIMER_D1 0x00000002 // Timer 1 Deep-Sleep Mode Clock
// Gating Control
#define SYSCTL_DCGCTIMER_D0 0x00000001 // Timer 0 Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCGPIO
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCDMA register.
//
//*****************************************************************************
#define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCHIB register.
//
//*****************************************************************************
#define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep
// Mode Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUART
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCSSI register.
//
//*****************************************************************************
#define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCI2C register.
//
//*****************************************************************************
#define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCUSB register.
//
//*****************************************************************************
#define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock
// Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCCAN register.
//
//*****************************************************************************
#define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCADC register.
//
//*****************************************************************************
#define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCACMP
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0
// Deep-Sleep Mode Clock Gating
// Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCPWM register.
//
//*****************************************************************************
#define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCQEI register.
//
//*****************************************************************************
#define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCEEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_DCGCWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_DCGCWTIMER_D5 0x00000020 // Wide Timer 5 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWTIMER_D4 0x00000010 // Wide Timer 4 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWTIMER_D3 0x00000008 // Wide Timer 3 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWTIMER_D2 0x00000004 // Wide Timer 2 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWTIMER_D1 0x00000002 // Wide Timer 1 Deep-Sleep Mode
// Clock Gating Control
#define SYSCTL_DCGCWTIMER_D0 0x00000001 // Wide Timer 0 Deep-Sleep Mode
// Clock Gating Control
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWD register.
//
//*****************************************************************************
#define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral
// Ready
#define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRTIMER register.
//
//*****************************************************************************
#define SYSCTL_PRTIMER_R5 0x00000020 // Timer 5 Peripheral Ready
#define SYSCTL_PRTIMER_R4 0x00000010 // Timer 4 Peripheral Ready
#define SYSCTL_PRTIMER_R3 0x00000008 // Timer 3 Peripheral Ready
#define SYSCTL_PRTIMER_R2 0x00000004 // Timer 2 Peripheral Ready
#define SYSCTL_PRTIMER_R1 0x00000002 // Timer 1 Peripheral Ready
#define SYSCTL_PRTIMER_R0 0x00000001 // Timer 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRGPIO register.
//
//*****************************************************************************
#define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready
#define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready
#define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready
#define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready
#define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready
#define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready
#define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready
#define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready
#define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready
#define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready
#define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready
#define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready
#define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready
#define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready
#define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRDMA register.
//
//*****************************************************************************
#define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRHIB register.
//
//*****************************************************************************
#define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral
// Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUART register.
//
//*****************************************************************************
#define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready
#define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready
#define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready
#define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready
#define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready
#define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready
#define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready
#define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRSSI register.
//
//*****************************************************************************
#define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready
#define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready
#define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready
#define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRI2C register.
//
//*****************************************************************************
#define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready
#define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready
#define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready
#define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready
#define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready
#define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRUSB register.
//
//*****************************************************************************
#define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRCAN register.
//
//*****************************************************************************
#define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready
#define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRADC register.
//
//*****************************************************************************
#define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready
#define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRACMP register.
//
//*****************************************************************************
#define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0
// Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRPWM register.
//
//*****************************************************************************
#define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready
#define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRQEI register.
//
//*****************************************************************************
#define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready
#define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PREEPROM
// register.
//
//*****************************************************************************
#define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready
//*****************************************************************************
//
// The following are defines for the bit fields in the SYSCTL_PRWTIMER
// register.
//
//*****************************************************************************
#define SYSCTL_PRWTIMER_R5 0x00000020 // Wide Timer 5 Peripheral Ready
#define SYSCTL_PRWTIMER_R4 0x00000010 // Wide Timer 4 Peripheral Ready
#define SYSCTL_PRWTIMER_R3 0x00000008 // Wide Timer 3 Peripheral Ready
#define SYSCTL_PRWTIMER_R2 0x00000004 // Wide Timer 2 Peripheral Ready
#define SYSCTL_PRWTIMER_R1 0x00000002 // Wide Timer 1 Peripheral Ready
#define SYSCTL_PRWTIMER_R0 0x00000001 // Wide Timer 0 Peripheral Ready
#endif // __HW_SYSCTL_H__
c60021a68This file is pinned to the selected release. Download the original to open it in your design tool.