Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
c60021a68This file is pinned to the selected release. Download the original to open it in your design tool.
//*****************************************************************************
//
// hw_comp.h - Macros used when accessing the comparator hardware.
//
// Copyright (c) 2005-2013 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.1 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_COMP_H__
#define __HW_COMP_H__
//*****************************************************************************
//
// The following are defines for the Comparator register offsets.
//
//*****************************************************************************
#define COMP_O_ACMIS 0x00000000 // Analog Comparator Masked
// Interrupt Status
#define COMP_O_ACRIS 0x00000004 // Analog Comparator Raw Interrupt
// Status
#define COMP_O_ACINTEN 0x00000008 // Analog Comparator Interrupt
// Enable
#define COMP_O_ACREFCTL 0x00000010 // Analog Comparator Reference
// Voltage Control
#define COMP_O_ACSTAT0 0x00000020 // Analog Comparator Status 0
#define COMP_O_ACCTL0 0x00000024 // Analog Comparator Control 0
#define COMP_O_ACSTAT1 0x00000040 // Analog Comparator Status 1
#define COMP_O_ACCTL1 0x00000044 // Analog Comparator Control 1
#define COMP_O_ACSTAT2 0x00000060 // Analog Comparator Status 2
#define COMP_O_ACCTL2 0x00000064 // Analog Comparator Control 2
#define COMP_O_PP 0x00000FC0 // Analog Comparator Peripheral
// Properties
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACMIS register.
//
//*****************************************************************************
#define COMP_ACMIS_IN2 0x00000004 // Comparator 2 Masked Interrupt
// Status
#define COMP_ACMIS_IN1 0x00000002 // Comparator 1 Masked Interrupt
// Status
#define COMP_ACMIS_IN0 0x00000001 // Comparator 0 Masked Interrupt
// Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACRIS register.
//
//*****************************************************************************
#define COMP_ACRIS_IN2 0x00000004 // Comparator 2 Interrupt Status
#define COMP_ACRIS_IN1 0x00000002 // Comparator 1 Interrupt Status
#define COMP_ACRIS_IN0 0x00000001 // Comparator 0 Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACINTEN register.
//
//*****************************************************************************
#define COMP_ACINTEN_IN2 0x00000004 // Comparator 2 Interrupt Enable
#define COMP_ACINTEN_IN1 0x00000002 // Comparator 1 Interrupt Enable
#define COMP_ACINTEN_IN0 0x00000001 // Comparator 0 Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACREFCTL
// register.
//
//*****************************************************************************
#define COMP_ACREFCTL_EN 0x00000200 // Resistor Ladder Enable
#define COMP_ACREFCTL_RNG 0x00000100 // Resistor Ladder Range
#define COMP_ACREFCTL_VREF_M 0x0000000F // Resistor Ladder Voltage Ref
#define COMP_ACREFCTL_VREF_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT0 register.
//
//*****************************************************************************
#define COMP_ACSTAT0_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL0 register.
//
//*****************************************************************************
#define COMP_ACCTL0_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL0_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL0_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL0_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL0_ASRCP_REF 0x00000400 // Internal voltage reference
#define COMP_ACCTL0_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL0_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL0_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL0_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL0_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL0_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL0_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL0_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL0_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL0_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL0_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL0_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL0_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT1 register.
//
//*****************************************************************************
#define COMP_ACSTAT1_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL1 register.
//
//*****************************************************************************
#define COMP_ACCTL1_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL1_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL1_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL1_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL1_ASRCP_REF 0x00000400 // Internal voltage reference
// (VIREF)
#define COMP_ACCTL1_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL1_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL1_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL1_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL1_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL1_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL1_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL1_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL1_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL1_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL1_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL1_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL1_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACSTAT2 register.
//
//*****************************************************************************
#define COMP_ACSTAT2_OVAL 0x00000002 // Comparator Output Value
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_ACCTL2 register.
//
//*****************************************************************************
#define COMP_ACCTL2_TOEN 0x00000800 // Trigger Output Enable
#define COMP_ACCTL2_ASRCP_M 0x00000600 // Analog Source Positive
#define COMP_ACCTL2_ASRCP_PIN 0x00000000 // Pin value of Cn+
#define COMP_ACCTL2_ASRCP_PIN0 0x00000200 // Pin value of C0+
#define COMP_ACCTL2_ASRCP_REF 0x00000400 // Internal voltage reference
// (VIREF)
#define COMP_ACCTL2_TSLVAL 0x00000080 // Trigger Sense Level Value
#define COMP_ACCTL2_TSEN_M 0x00000060 // Trigger Sense
#define COMP_ACCTL2_TSEN_LEVEL 0x00000000 // Level sense, see TSLVAL
#define COMP_ACCTL2_TSEN_FALL 0x00000020 // Falling edge
#define COMP_ACCTL2_TSEN_RISE 0x00000040 // Rising edge
#define COMP_ACCTL2_TSEN_BOTH 0x00000060 // Either edge
#define COMP_ACCTL2_ISLVAL 0x00000010 // Interrupt Sense Level Value
#define COMP_ACCTL2_ISEN_M 0x0000000C // Interrupt Sense
#define COMP_ACCTL2_ISEN_LEVEL 0x00000000 // Level sense, see ISLVAL
#define COMP_ACCTL2_ISEN_FALL 0x00000004 // Falling edge
#define COMP_ACCTL2_ISEN_RISE 0x00000008 // Rising edge
#define COMP_ACCTL2_ISEN_BOTH 0x0000000C // Either edge
#define COMP_ACCTL2_CINV 0x00000002 // Comparator Output Invert
//*****************************************************************************
//
// The following are defines for the bit fields in the COMP_O_PP register.
//
//*****************************************************************************
#define COMP_PP_C2O 0x00040000 // Comparator Output 2 Present
#define COMP_PP_C1O 0x00020000 // Comparator Output 1 Present
#define COMP_PP_C0O 0x00010000 // Comparator Output 0 Present
#define COMP_PP_CMP2 0x00000004 // Comparator 2 Present
#define COMP_PP_CMP1 0x00000002 // Comparator 1 Present
#define COMP_PP_CMP0 0x00000001 // Comparator 0 Present
#endif // __HW_COMP_H__