Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
//*****************************************************************************
//
// hw_eeprom.h - Macros used when accessing the EEPROM controller.
//
// Copyright (c) 2011-2013 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 1.1 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_EEPROM_H__
#define __HW_EEPROM_H__
//*****************************************************************************
//
// The following are defines for the EEPROM register offsets.
//
//*****************************************************************************
#define EEPROM_EESIZE 0x400AF000 // EEPROM Size Information
#define EEPROM_EEBLOCK 0x400AF004 // EEPROM Current Block
#define EEPROM_EEOFFSET 0x400AF008 // EEPROM Current Offset
#define EEPROM_EERDWR 0x400AF010 // EEPROM Read-Write
#define EEPROM_EERDWRINC 0x400AF014 // EEPROM Read-Write with Increment
#define EEPROM_EEDONE 0x400AF018 // EEPROM Done Status
#define EEPROM_EESUPP 0x400AF01C // EEPROM Support Control and
// Status
#define EEPROM_EEUNLOCK 0x400AF020 // EEPROM Unlock
#define EEPROM_EEPROT 0x400AF030 // EEPROM Protection
#define EEPROM_EEPASS0 0x400AF034 // EEPROM Password
#define EEPROM_EEPASS1 0x400AF038 // EEPROM Password
#define EEPROM_EEPASS2 0x400AF03C // EEPROM Password
#define EEPROM_EEINT 0x400AF040 // EEPROM Interrupt
#define EEPROM_EEHIDE 0x400AF050 // EEPROM Block Hide
#define EEPROM_EEDBGME 0x400AF080 // EEPROM Debug Mass Erase
#define EEPROM_PP 0x400AFFC0 // EEPROM Peripheral Properties
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESIZE register.
//
//*****************************************************************************
#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF // Number of 32-Bit Words
#define EEPROM_EESIZE_BLKCNT_M 0x07FF0000 // Number of 16-Word Blocks
#define EEPROM_EESIZE_WORDCNT_S 0
#define EEPROM_EESIZE_BLKCNT_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEBLOCK register.
//
//*****************************************************************************
#define EEPROM_EEBLOCK_BLOCK_M 0x0000FFFF // Current Block
#define EEPROM_EEBLOCK_BLOCK_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEOFFSET
// register.
//
//*****************************************************************************
#define EEPROM_EEOFFSET_OFFSET_M \
0x0000000F // Current Address Offset
#define EEPROM_EEOFFSET_OFFSET_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWR register.
//
//*****************************************************************************
#define EEPROM_EERDWR_VALUE_M 0xFFFFFFFF // EEPROM Read or Write Data
#define EEPROM_EERDWR_VALUE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWRINC
// register.
//
//*****************************************************************************
#define EEPROM_EERDWRINC_VALUE_M \
0xFFFFFFFF // EEPROM Read or Write Data with
// Increment
#define EEPROM_EERDWRINC_VALUE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDONE register.
//
//*****************************************************************************
#define EEPROM_EEDONE_WORKING 0x00000001 // EEPROM Working
#define EEPROM_EEDONE_WKERASE 0x00000004 // Working on an Erase
#define EEPROM_EEDONE_WKCOPY 0x00000008 // Working on a Copy
#define EEPROM_EEDONE_NOPERM 0x00000010 // Write Without Permission
#define EEPROM_EEDONE_WRBUSY 0x00000020 // Write Busy
#define EEPROM_EEDONE_INVPL 0x00000100 // Invalid Program Voltage Level
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESUPP register.
//
//*****************************************************************************
#define EEPROM_EESUPP_START 0x00000001 // Start Erase
#define EEPROM_EESUPP_EREQ 0x00000002 // Erase Required
#define EEPROM_EESUPP_ERETRY 0x00000004 // Erase Must Be Retried
#define EEPROM_EESUPP_PRETRY 0x00000008 // Programming Must Be Retried
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEUNLOCK
// register.
//
//*****************************************************************************
#define EEPROM_EEUNLOCK_UNLOCK_M \
0xFFFFFFFF // EEPROM Unlock
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROT register.
//
//*****************************************************************************
#define EEPROM_EEPROT_PROT_M 0x00000007 // Protection Control
#define EEPROM_EEPROT_PROT_RWNPW \
0x00000000 // This setting is the default. If
// there is no password, the block
// is not protected and is readable
// and writable
#define EEPROM_EEPROT_PROT_RWPW 0x00000001 // If there is a password, the
// block is readable or writable
// only when unlocked
#define EEPROM_EEPROT_PROT_RONPW \
0x00000002 // If there is no password, the
// block is readable, not writable
#define EEPROM_EEPROT_ACC 0x00000008 // Access Control
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS0 register.
//
//*****************************************************************************
#define EEPROM_EEPASS0_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS0_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS1 register.
//
//*****************************************************************************
#define EEPROM_EEPASS1_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS1_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS2 register.
//
//*****************************************************************************
#define EEPROM_EEPASS2_PASS_M 0xFFFFFFFF // Password
#define EEPROM_EEPASS2_PASS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEINT register.
//
//*****************************************************************************
#define EEPROM_EEINT_INT 0x00000001 // Interrupt Enable
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE register.
//
//*****************************************************************************
#define EEPROM_EEHIDE_HN_M 0xFFFFFFFE // Hide Block
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDBGME register.
//
//*****************************************************************************
#define EEPROM_EEDBGME_ME 0x00000001 // Mass Erase
#define EEPROM_EEDBGME_KEY_M 0xFFFF0000 // Erase Key
#define EEPROM_EEDBGME_KEY_S 16
//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_PP register.
//
//*****************************************************************************
#define EEPROM_PP_SIZE_M 0x0000001F // EEPROM Size
#define EEPROM_PP_SIZE_S 0
#endif // __HW_EEPROM_H__
338d9091fThis file is pinned to the selected release. Download the original to open it in your design tool.