Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// window_dlg_loadunload.c
#include "window_dlg_loadunload.h"
#include "window_dlg_loadunload_shared.h"
#include "display_helper.h"
#include "gui.h"
#include "marlin_client.h"
#include "dbg.h"
#include "menu_vars.h"
#include "stm32f4xx_hal.h"
#include <limits.h>
/*****************************************************************************/
//shared for LOAD and UNLOAD
const _dlg_button_t bt_stop_ena = { "STOP", BT_VISIBLE | BT_ENABLED | BT_AUTOEXIT };
const _dlg_button_t bt_stop_dis = { "STOP", BT_VISIBLE };
const _dlg_button_t bt_cont_ena = { "CONTINUE", BT_VISIBLE | BT_ENABLED };
const _dlg_button_t bt_cont_dis = { "CONTINUE", BT_VISIBLE };
const _dlg_button_t bt_none = { "", 0 };
const _dlg_button_t bt_dont_clr = { "", BT_ENABLED }; //enabled but not visible == do not clear
int f_SH_INIT(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
marlin_gcode("G92 E0"); //saves calculation
additional_vars->z_start = marlin_update_vars(MARLIN_VAR_MSK(MARLIN_VAR_POS_Z))->pos[2];
p_vars->phase++;
return 0;
}
int _was_move(_dlg_ld_vars* additional_vars)
{
return additional_vars->initial_move > z_offset_step;
}
int f_SH_MOVE_INITIAL_Z(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
additional_vars->initial_move = additional_vars->z_min_extr_pos - additional_vars->z_start;
if (_was_move(additional_vars)) {
marlin_gcode_printf("G0 Z%f", (double)additional_vars->z_min_extr_pos); //move to start pos
additional_vars->z_start = additional_vars->z_min_extr_pos; //set new start pos
}
p_vars->phase++;
return 0;
}
int f_SH_WAIT_INITIAL_Z_MOTION(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
if (_was_move(additional_vars)) {
//did move
//wait Z motion
if (p_vars->p_marlin_vars->motion & MARLIN_VAR_MOTION_MSK_Z)
p_vars->phase++;
} else {
//no move, skip this part
p_vars->phase++;
}
return 0;
}
int f_SH_WAIT_INITIAL_Z_STOPPED(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
if (_was_move(additional_vars)) {
//did move, wait Z stopped
if ((p_vars->p_marlin_vars->motion & MARLIN_VAR_MOTION_MSK_Z) == 0)
p_vars->phase++;
return 100.F * (p_vars->p_marlin_vars->pos[MARLIN_VAR_INDEX_Z] - additional_vars->z_start) / additional_vars->initial_move;
} else {
//no move, skip this part
p_vars->phase++;
}
return 0;
}
int f_SH_WAIT_E_MOTION(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
//wait E motion
if (p_vars->p_marlin_vars->motion & MARLIN_VAR_MOTION_MSK_E)
p_vars->phase++;
return 0;
}
int f_SH_WAIT_E_STOPPED(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
//wait Z stopped
if ((p_vars->p_marlin_vars->motion & MARLIN_VAR_MOTION_MSK_E) == 0)
p_vars->phase++;
return 0;
}
int f_SH_WAIT_TEMP(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
//wait E temp
float min_temp = p_vars->p_marlin_vars->target_nozzle - 10.0F;
float diff_temp = p_vars->p_marlin_vars->temp_nozzle - min_temp;
if (diff_temp > 0) {
p_vars->phase++;
return 100;
} else {
//200 degrrees diff == 0%
diff_temp = 100.0F + diff_temp / 2;
if (diff_temp > 99.0F)
return 99;
if (diff_temp < 0.0F)
return 0;
return (int)diff_temp;
}
}
int f_SH_WAIT_E_MOTION__WAIT_TEMP(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
//wait E motion
if (p_vars->p_marlin_vars->motion & MARLIN_VAR_MOTION_MSK_E)
p_vars->phase++;
return 100 * (HAL_GetTick() - p_vars->tick_part_start) / 10000;
}
int f_SH_WAIT_READY(_dlg_vars* p_vars, _dlg_ld_vars* additional_vars)
{
//wait ready
if (!marlin_busy())
p_vars->phase = -1;
return 0;
}
efe9a7c8eThis file is pinned to the selected release. Download the original to open it in your design tool.