hackaton2019

#include "menu_vars.h"
#include "config.h"
#include "int_to_cstr.h"

#include "../Marlin/src/inc/MarlinConfig.h"
#include "../Marlin/src/module/temperature.h"


#if (PRINTER_TYPE == PRINTER_PRUSA_MINI)
#include "gui_config_mini.h"
#endif


extern "C"
{
const int x_axis_len  = X_LEN;
const int y_axis_len  = Y_LEN;
const int z_axis_len  = Z_LEN;

// tolerance (common for all axes)
const int len_tol_abs = LEN_TOL_ABS;// length absolute tolerance (+-5mm)
const int len_tol_rev = LEN_TOL_REV; // length tolerance in reversed direction (3mm)

const int axis_steps_per_unit[] = DEFAULT_AXIS_STEPS_PER_UNIT;

const float nozzle_to_probe[3] = NOZZLE_TO_PROBE_OFFSET;

const float z_offset_step   = 1.0F / float(axis_steps_per_unit[2]);
const float z_offset_min    = Z_OFFSET_MIN;
const float z_offset_max    = Z_OFFSET_MAX;
const float zoffset_fl_range[3] = {z_offset_min, z_offset_max, z_offset_step};
const char* zoffset_fl_format   = "%.3f";
const int32_t nozzle_range[3]    = {0, (HEATER_0_MAXTEMP-15)*1000, 1000};
const int32_t heatbed_range[3]   = {0, BED_MAXTEMP*1000, 1000};
const int32_t printfan_range[3]  = {0, 255000, 1000};
const int32_t flowfact_range[3]  = {50000, 150000, 1000};
const int32_t feedrate_range[3]  = {50000, 300000, 1000};

const int32_t move_x[3] = {(int32_t)(X_MIN_POS*1000), (int32_t)(X_MAX_POS*1000), 1000};
const int32_t move_y[3] = {(int32_t)(Y_MIN_POS*1000), (int32_t)(Y_MAX_POS*1000), 1000};
const int32_t move_z[3] = {(int32_t)(Z_MIN_POS*1000), (int32_t)(Z_MAX_POS*1000), 1000};
const int32_t move_e[3] = {-EXTRUDE_MAXLENGTH*1000, EXTRUDE_MAXLENGTH*1000, 1000};		// +/- 2 ->will be reset to +/- 1
const int32_t manual_feedrate[4] = MANUAL_FEEDRATE;

const int32_t extrude_min_temp = EXTRUDE_MINTEMP;

//must be in this file, need to access marlin
constexpr const int park_points[3] = NOZZLE_PARK_POINT;

//min int -2147483648 .. 8 digits + 1 for /0

constexpr const int X_home = X_HOME_DIR>0 ? X_MAX_POS : X_MIN_POS;
constexpr const int Y_home = Y_HOME_DIR>0 ? Y_MAX_POS : Y_MIN_POS;


constexpr const char X_home_gcode[] =
{
	'G',
	'9',
	'2',
	' ',
	'X',
	nth_char(X_home,0),
	nth_char(X_home,1),
	nth_char(X_home,2),
	nth_char(X_home,3),
	nth_char(X_home,4),
	nth_char(X_home,5),
	nth_char(X_home,6),
	nth_char(X_home,7),
	nth_char(X_home,8)
};

constexpr const char Y_home_gcode[] =
{
	'G',
	'9',
	'2',
	' ',
	'Y',
	nth_char(Y_home,0),
	nth_char(Y_home,1),
	nth_char(Y_home,2),
	nth_char(Y_home,3),
	nth_char(Y_home,4),
	nth_char(Y_home,5),
	nth_char(Y_home,6),
	nth_char(Y_home,7),
	nth_char(Y_home,8)
};


}