FaderBuddy

; PlatformIO Project Configuration File

[platformio]
src_dir = firmware/src
lib_dir = firmware/lib
include_dir = firmware/include
test_dir = firmware/test
data_dir = firmware/data


[env:fader_buddy]
platform = atmelmegaavr
board = ATtiny1616
framework = arduino
extra_scripts =
	firmware/tools/install_pyupdi.py
	firmware/tools/erase_target.py
upload_speed = 115200
upload_port = /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
monitor_speed = 115200
monitor_port = /dev/ttyUSB1
board_build.f_cpu = 20000000L
upload_flags = 
	-d
	attiny1616
	-c
	$UPLOAD_PORT
	-b
	$UPLOAD_SPEED
upload_command = pyupdi $UPLOAD_FLAGS -f $SOURCE
lib_deps =
	https://github.com/lacklustrlabs/Arduino-PID-Library.git#4f38652f30c06257fe2cafc33eb8066457dce0de
	https://github.com/MX682X/ptc_touch.git#651db78f89633a35cd5412c481c631c2e74c9307
build_flags = 
 -DARDUINO_AVR_ATtiny1616
 -DPRODUCT_CODE=1234
 -DCONFIG_I2C_PERIPH_ADDR=0x50

 -DCONFIG_ADDR_0_PIN=PIN_PC2
 -DCONFIG_ADDR_1_PIN=PIN_PC1
 -DCONFIG_ADDR_2_PIN=PIN_PC0

 -DCONFIG_CUSTOM_HOOKS=1

; System-identification build: adds the open-loop REG_DEBUG_DRIVE register used
; by production_tools/programAndTest (env:lab) to characterise the motor.
; Not for production - it lets a host drive the H-bridge directly.
[env:fader_buddy_lab]
extends = env:fader_buddy
build_flags =
 ${env:fader_buddy.build_flags}
 -DDEBUG_DRIVE=1