Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
4f62c83c0This file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2020 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Authors:
// - Luca Colagrande <colluca@iis.ee.ethz.ch>
`include "common_cells/assertions.svh"
// Stream join dynamic: Joins a parametrizable number of input streams (i.e. valid-ready
// handshaking with dependency rules as in AXI4) to a single output stream. The subset of streams
// to join can be configured dynamically via `sel_i`. The output handshake happens only after
// there has been a handshake. The data channel flows outside of this module.
module cc_stream_join_dynamic #(
/// Number of input streams
parameter int unsigned NumInp = 32'd1 // Synopsys DC requires a default value for parameters.
) (
/// Input streams valid handshakes
input logic [NumInp-1:0] inp_valid_i,
/// Input streams ready handshakes
output logic [NumInp-1:0] inp_ready_o,
/// Selection mask for the output handshake
input logic [NumInp-1:0] sel_i,
/// Output stream valid handshake
output logic oup_valid_o,
/// Output stream ready handshake
input logic oup_ready_i
);
// Corner case when `sel_i` is all 0s should not generate valid
assign oup_valid_o = &(inp_valid_i | ~sel_i) && |sel_i;
for (genvar i = 0; i < NumInp; i++) begin : gen_inp_ready
assign inp_ready_o[i] = oup_valid_o & oup_ready_i & sel_i[i];
end
`ifndef COMMON_CELLS_ASSERTS_OFF
`ASSERT_INIT(n_inp_0, NumInp >= 1, "NumInp must be at least 1!")
`endif
endmodule