Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
ae5965e0fThis file is pinned to the selected release. Download the original to open it in your design tool.
// Copyright 2020 ETH Zurich and University of Bologna.
// Copyright and related rights are licensed under the Solderpad Hardware
// License, Version 0.51 (the "License"); you may not use this file except in
// compliance with the License. You may obtain a copy of the License at
// http://solderpad.org/licenses/SHL-0.51. Unless required by applicable law
// or agreed to in writing, software, hardware and materials distributed under
// this License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
// CONDITIONS OF ANY KIND, either express or implied. See the License for the
// specific language governing permissions and limitations under the License.
// Author: Georg Rutishauser <georgr@iis.ee.ethz.ch>
module stream_fifo #(
/// FIFO is in fall-through mode
parameter bit FALL_THROUGH = 1'b0,
/// Default data width if the fifo is of type logic
parameter int unsigned DATA_WIDTH = 32,
/// Depth can be arbitrary from 0 to 2**32
parameter int unsigned DEPTH = 8,
parameter type T = logic [DATA_WIDTH-1:0],
// DO NOT OVERWRITE THIS PARAMETER
parameter int unsigned ADDR_DEPTH = (DEPTH > 1) ? $clog2(DEPTH) : 1
) (
input logic clk_i, // Clock
input logic rst_ni, // Asynchronous reset active low
input logic flush_i, // flush the fifo
input logic testmode_i, // test_mode to bypass clock gating
output logic [ADDR_DEPTH-1:0] usage_o, // fill pointer
// input interface
input T data_i, // data to push into the fifo
input logic valid_i, // input data valid
output logic ready_o, // fifo is not full
// output interface
output T data_o, // output data
output logic valid_o, // fifo is not empty
input logic ready_i // pop head from fifo
);
logic push, pop;
logic empty, full;
assign push = valid_i & ~full;
assign pop = ready_i & ~empty;
assign ready_o = ~full;
assign valid_o = ~empty;
fifo_v3 #(
.FALL_THROUGH (FALL_THROUGH),
.DATA_WIDTH (DATA_WIDTH),
.DEPTH (DEPTH),
.dtype(T)
) fifo_i (
.clk_i,
.rst_ni,
.flush_i,
.testmode_i,
.full_o (full),
.empty_o (empty),
.usage_o,
.data_i,
.push_i (push),
.data_o,
.pop_i (pop)
);
endmodule