bullet3

/*---------------------------------------------------------------------------*/
/*                                                                           */
/* PassiveSocket.cpp - Passive Socket Implementation                         */
/*                                                                           */
/* Author : Mark Carrier (mark@carrierlabs.com)                              */
/*                                                                           */
/*---------------------------------------------------------------------------*/
/* Copyright (c) 2007-2009 CarrierLabs, LLC.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * 4. The name "CarrierLabs" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    mark@carrierlabs.com.
 *
 * THIS SOFTWARE IS PROVIDED BY MARK CARRIER ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL MARK CARRIER OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 *----------------------------------------------------------------------------*/
#include "PassiveSocket.h"

CPassiveSocket::CPassiveSocket(CSocketType nType) : CSimpleSocket(nType)
{
}

bool CPassiveSocket::BindMulticast(const char *pInterface, const char *pGroup, uint16 nPort)
{
	bool bRetVal = false;
#ifdef WIN32
	ULONG inAddr;
#else
	int32 nReuse;
	in_addr_t inAddr;

	nReuse = IPTOS_LOWDELAY;
#endif

	//--------------------------------------------------------------------------
	// Set the following socket option SO_REUSEADDR.  This will allow the file
	// descriptor to be reused immediately after the socket is closed instead
	// of setting in a TIMED_WAIT state.
	//--------------------------------------------------------------------------
	memset(&m_stMulticastGroup, 0, sizeof(m_stMulticastGroup));
	m_stMulticastGroup.sin_family = AF_INET;
	m_stMulticastGroup.sin_port = htons(nPort);

	//--------------------------------------------------------------------------
	// If no IP Address (interface ethn) is supplied, or the loop back is
	// specified then bind to any interface, else bind to specified interface.
	//--------------------------------------------------------------------------
	if ((pInterface == NULL) || (!strlen(pInterface)))
	{
		m_stMulticastGroup.sin_addr.s_addr = htonl(INADDR_ANY);
	}
	else
	{
		if ((inAddr = inet_addr(pInterface)) != INADDR_NONE)
		{
			m_stMulticastGroup.sin_addr.s_addr = inAddr;
		}
	}

	//--------------------------------------------------------------------------
	// Bind to the specified port
	//--------------------------------------------------------------------------
	if (bind(m_socket, (struct sockaddr *)&m_stMulticastGroup, sizeof(m_stMulticastGroup)) == 0)
	{
		//----------------------------------------------------------------------
		// Join the multicast group
		//----------------------------------------------------------------------
		m_stMulticastRequest.imr_multiaddr.s_addr = inet_addr(pGroup);
		m_stMulticastRequest.imr_interface.s_addr = m_stMulticastGroup.sin_addr.s_addr;

		if (SETSOCKOPT(m_socket, IPPROTO_IP, IP_ADD_MEMBERSHIP,
					   (void *)&m_stMulticastRequest,
					   sizeof(m_stMulticastRequest)) == CSimpleSocket::SocketSuccess)
		{
			bRetVal = true;
		}

		m_timer.SetEndTime();
	}

	m_timer.Initialize();
	m_timer.SetStartTime();

	//--------------------------------------------------------------------------
	// If there was a socket error then close the socket to clean out the
	// connection in the backlog.
	//--------------------------------------------------------------------------
	TranslateSocketError();

	if (bRetVal == false)
	{
		Close();
	}

	return bRetVal;
}

//------------------------------------------------------------------------------
//
// Listen() -
//
//------------------------------------------------------------------------------
bool CPassiveSocket::Listen(const char *pAddr, uint16 nPort, int32 nConnectionBacklog)
{
	bool bRetVal = false;
#ifdef WIN32
	ULONG inAddr;
#else
	int32 nReuse;
	in_addr_t inAddr;

	nReuse = IPTOS_LOWDELAY;
#endif

	//--------------------------------------------------------------------------
	// Set the following socket option SO_REUSEADDR.  This will allow the file
	// descriptor to be reused immediately after the socket is closed instead
	// of setting in a TIMED_WAIT state.
	//--------------------------------------------------------------------------
#ifdef _LINUX
	SETSOCKOPT(m_socket, SOL_SOCKET, SO_REUSEADDR, (char *)&nReuse, sizeof(int32));
	SETSOCKOPT(m_socket, IPPROTO_TCP, IP_TOS, &nReuse, sizeof(int32));
#endif

	memset(&m_stServerSockaddr, 0, sizeof(m_stServerSockaddr));
	m_stServerSockaddr.sin_family = AF_INET;
	m_stServerSockaddr.sin_port = htons(nPort);

	//--------------------------------------------------------------------------
	// If no IP Address (interface ethn) is supplied, or the loop back is
	// specified then bind to any interface, else bind to specified interface.
	//--------------------------------------------------------------------------
	if ((pAddr == NULL) || (!strlen(pAddr)))
	{
		m_stServerSockaddr.sin_addr.s_addr = htonl(INADDR_ANY);
	}
	else
	{
		if ((inAddr = inet_addr(pAddr)) != INADDR_NONE)
		{
			m_stServerSockaddr.sin_addr.s_addr = inAddr;
		}
	}

	m_timer.Initialize();
	m_timer.SetStartTime();

	//--------------------------------------------------------------------------
	// Bind to the specified port
	//--------------------------------------------------------------------------
	if (bind(m_socket, (struct sockaddr *)&m_stServerSockaddr, sizeof(m_stServerSockaddr)) != CSimpleSocket::SocketError)
	{
		if (m_nSocketType == CSimpleSocket::SocketTypeTcp)
		{
			if (listen(m_socket, nConnectionBacklog) != CSimpleSocket::SocketError)
			{
				bRetVal = true;
			}
		}
		else
		{
			bRetVal = true;
		}
	}

	m_timer.SetEndTime();

	//--------------------------------------------------------------------------
	// If there was a socket error then close the socket to clean out the
	// connection in the backlog.
	//--------------------------------------------------------------------------
	TranslateSocketError();

	if (bRetVal == false)
	{
		Close();
	}

	return bRetVal;
}

//------------------------------------------------------------------------------
//
// Accept() -
//
//------------------------------------------------------------------------------
CActiveSocket *CPassiveSocket::Accept()
{
	uint32 nSockLen;
	CActiveSocket *pClientSocket = NULL;
	SOCKET socket = CSimpleSocket::SocketError;

	if (m_nSocketType != CSimpleSocket::SocketTypeTcp)
	{
		SetSocketError(CSimpleSocket::SocketProtocolError);
		return pClientSocket;
	}

	pClientSocket = new CActiveSocket();

	//--------------------------------------------------------------------------
	// Wait for incoming connection.
	//--------------------------------------------------------------------------
	if (pClientSocket != NULL)
	{
		CSocketError socketErrno = SocketSuccess;

		m_timer.Initialize();
		m_timer.SetStartTime();

		nSockLen = sizeof(m_stClientSockaddr);

		do
		{
			errno = 0;
			socket = accept(m_socket, (struct sockaddr *)&m_stClientSockaddr, (socklen_t *)&nSockLen);

			if (socket != -1)
			{
				pClientSocket->SetSocketHandle(socket);
				pClientSocket->TranslateSocketError();
				socketErrno = pClientSocket->GetSocketError();
				socklen_t nSockLen = sizeof(struct sockaddr);

				//-------------------------------------------------------------
				// Store client and server IP and port information for this
				// connection.
				//-------------------------------------------------------------
				getpeername(m_socket, (struct sockaddr *)&pClientSocket->m_stClientSockaddr, &nSockLen);
				memcpy((void *)&pClientSocket->m_stClientSockaddr, (void *)&m_stClientSockaddr, nSockLen);

				memset(&pClientSocket->m_stServerSockaddr, 0, nSockLen);
				getsockname(m_socket, (struct sockaddr *)&pClientSocket->m_stServerSockaddr, &nSockLen);
			}
			else
			{
				TranslateSocketError();
				socketErrno = GetSocketError();
			}

		} while (socketErrno == CSimpleSocket::SocketInterrupted);

		m_timer.SetEndTime();

		if (socketErrno != CSimpleSocket::SocketSuccess)
		{
			delete pClientSocket;
			pClientSocket = NULL;
		}
	}

	return pClientSocket;
}

//------------------------------------------------------------------------------
//
// Send() - Send data on a valid socket
//
//------------------------------------------------------------------------------
int32 CPassiveSocket::Send(const uint8 *pBuf, size_t bytesToSend)
{
	SetSocketError(SocketSuccess);
	m_nBytesSent = 0;

	switch (m_nSocketType)
	{
		case CSimpleSocket::SocketTypeUdp:
		{
			if (IsSocketValid())
			{
				if ((bytesToSend > 0) && (pBuf != NULL))
				{
					m_timer.Initialize();
					m_timer.SetStartTime();

					m_nBytesSent = SENDTO(m_socket, pBuf, bytesToSend, 0,
										  (const sockaddr *)&m_stClientSockaddr,
										  sizeof(m_stClientSockaddr));

					m_timer.SetEndTime();

					if (m_nBytesSent == CSimpleSocket::SocketError)
					{
						TranslateSocketError();
					}
				}
			}
			break;
		}
		case CSimpleSocket::SocketTypeTcp:
			CSimpleSocket::Send(pBuf, bytesToSend);
			break;
		default:
			SetSocketError(SocketProtocolError);
			break;
	}

	return m_nBytesSent;
}