bullet3

/*---------------------------------------------------------------------------*/
/*                                                                           */
/* CActiveSocket.cpp - Active Socket Implementation                          */
/*                                                                           */
/* Author : Mark Carrier (mark@carrierlabs.com)                              */
/*                                                                           */
/*---------------------------------------------------------------------------*/
/* Copyright (c) 2007-2009 CarrierLabs, LLC.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * 4. The name "CarrierLabs" must not be used to
 *    endorse or promote products derived from this software without
 *    prior written permission. For written permission, please contact
 *    mark@carrierlabs.com.
 *
 * THIS SOFTWARE IS PROVIDED BY MARK CARRIER ``AS IS'' AND ANY
 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL MARK CARRIER OR
 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 * OF THE POSSIBILITY OF SUCH DAMAGE.
 *----------------------------------------------------------------------------*/
#include "ActiveSocket.h"

CActiveSocket::CActiveSocket(CSocketType nType) : CSimpleSocket(nType)
{
}

//------------------------------------------------------------------------------
//
// ConnectTCP() -
//
//------------------------------------------------------------------------------
bool CActiveSocket::ConnectTCP(const char *pAddr, uint16 nPort)
{
	bool bRetVal = false;
	struct in_addr stIpAddress;

	//------------------------------------------------------------------
	// Preconnection setup that must be preformed
	//------------------------------------------------------------------
	memset(&m_stServerSockaddr, 0, sizeof(m_stServerSockaddr));
	m_stServerSockaddr.sin_family = AF_INET;

	if ((m_pHE = GETHOSTBYNAME(pAddr)) == NULL)
	{
#ifdef WIN32
		TranslateSocketError();
#else
		if (h_errno == HOST_NOT_FOUND)
		{
			SetSocketError(SocketInvalidAddress);
		}
#endif
		return bRetVal;
	}

	memcpy(&stIpAddress, m_pHE->h_addr_list[0], m_pHE->h_length);
	m_stServerSockaddr.sin_addr.s_addr = stIpAddress.s_addr;

	if ((int32)m_stServerSockaddr.sin_addr.s_addr == CSimpleSocket::SocketError)
	{
		TranslateSocketError();
		return bRetVal;
	}

	m_stServerSockaddr.sin_port = htons(nPort);

	//------------------------------------------------------------------
	// Connect to address "xxx.xxx.xxx.xxx"    (IPv4) address only.
	//
	//------------------------------------------------------------------
	m_timer.Initialize();
	m_timer.SetStartTime();

	if (connect(m_socket, (struct sockaddr *)&m_stServerSockaddr, sizeof(m_stServerSockaddr)) ==
		CSimpleSocket::SocketError)
	{
		//--------------------------------------------------------------
		// Get error value this might be a non-blocking socket so we
		// must first check.
		//--------------------------------------------------------------
		TranslateSocketError();

		//--------------------------------------------------------------
		// If the socket is non-blocking and the current socket error
		// is SocketEinprogress or SocketEwouldblock then poll connection
		// with select for designated timeout period.
		// Linux returns EINPROGRESS and Windows returns WSAEWOULDBLOCK.
		//--------------------------------------------------------------
		if ((IsNonblocking()) &&
			((GetSocketError() == CSimpleSocket::SocketEwouldblock) ||
			 (GetSocketError() == CSimpleSocket::SocketEinprogress)))
		{
			bRetVal = Select(GetConnectTimeoutSec(), GetConnectTimeoutUSec());
		}
	}
	else
	{
		TranslateSocketError();
		bRetVal = true;
	}

	m_timer.SetEndTime();

	return bRetVal;
}

//------------------------------------------------------------------------------
//
// ConnectUDP() -
//
//------------------------------------------------------------------------------
bool CActiveSocket::ConnectUDP(const char *pAddr, uint16 nPort)
{
	bool bRetVal = false;
	struct in_addr stIpAddress;

	//------------------------------------------------------------------
	// Pre-connection setup that must be preformed
	//------------------------------------------------------------------
	memset(&m_stServerSockaddr, 0, sizeof(m_stServerSockaddr));
	m_stServerSockaddr.sin_family = AF_INET;

	if ((m_pHE = GETHOSTBYNAME(pAddr)) == NULL)
	{
#ifdef WIN32
		TranslateSocketError();
#else
		if (h_errno == HOST_NOT_FOUND)
		{
			SetSocketError(SocketInvalidAddress);
		}
#endif
		return bRetVal;
	}

	memcpy(&stIpAddress, m_pHE->h_addr_list[0], m_pHE->h_length);
	m_stServerSockaddr.sin_addr.s_addr = stIpAddress.s_addr;

	if ((int32)m_stServerSockaddr.sin_addr.s_addr == CSimpleSocket::SocketError)
	{
		TranslateSocketError();
		return bRetVal;
	}

	m_stServerSockaddr.sin_port = htons(nPort);

	//------------------------------------------------------------------
	// Connect to address "xxx.xxx.xxx.xxx"    (IPv4) address only.
	//
	//------------------------------------------------------------------
	m_timer.Initialize();
	m_timer.SetStartTime();

	if (connect(m_socket, (struct sockaddr *)&m_stServerSockaddr, sizeof(m_stServerSockaddr)) != CSimpleSocket::SocketError)
	{
		bRetVal = true;
	}

	TranslateSocketError();

	m_timer.SetEndTime();

	return bRetVal;
}

//------------------------------------------------------------------------------
//
// ConnectRAW() -
//
//------------------------------------------------------------------------------
bool CActiveSocket::ConnectRAW(const char *pAddr, uint16 nPort)
{
	bool bRetVal = false;
	struct in_addr stIpAddress;
	//------------------------------------------------------------------
	// Pre-connection setup that must be preformed
	//------------------------------------------------------------------
	memset(&m_stServerSockaddr, 0, sizeof(m_stServerSockaddr));
	m_stServerSockaddr.sin_family = AF_INET;

	if ((m_pHE = GETHOSTBYNAME(pAddr)) == NULL)
	{
#ifdef WIN32
		TranslateSocketError();
#else
		if (h_errno == HOST_NOT_FOUND)
		{
			SetSocketError(SocketInvalidAddress);
		}
#endif
		return bRetVal;
	}

	memcpy(&stIpAddress, m_pHE->h_addr_list[0], m_pHE->h_length);
	m_stServerSockaddr.sin_addr.s_addr = stIpAddress.s_addr;

	if ((int32)m_stServerSockaddr.sin_addr.s_addr == CSimpleSocket::SocketError)
	{
		TranslateSocketError();
		return bRetVal;
	}

	m_stServerSockaddr.sin_port = htons(nPort);

	//------------------------------------------------------------------
	// Connect to address "xxx.xxx.xxx.xxx"    (IPv4) address only.
	//
	//------------------------------------------------------------------
	m_timer.Initialize();
	m_timer.SetStartTime();

	if (connect(m_socket, (struct sockaddr *)&m_stServerSockaddr, sizeof(m_stServerSockaddr)) != CSimpleSocket::SocketError)
	{
		bRetVal = true;
	}

	TranslateSocketError();

	m_timer.SetEndTime();

	return bRetVal;
}

//------------------------------------------------------------------------------
//
// Open() - Create a connection to a specified address on a specified port
//
//------------------------------------------------------------------------------
bool CActiveSocket::Open(const char *pAddr, uint16 nPort)
{
	bool bRetVal = false;

	if (IsSocketValid() == false)
	{
		SetSocketError(CSimpleSocket::SocketInvalidSocket);
		return bRetVal;
	}

	if (pAddr == NULL)
	{
		SetSocketError(CSimpleSocket::SocketInvalidAddress);
		return bRetVal;
	}

	if (nPort == 0)
	{
		SetSocketError(CSimpleSocket::SocketInvalidPort);
		return bRetVal;
	}

	switch (m_nSocketType)
	{
		case CSimpleSocket::SocketTypeTcp:
		{
			bRetVal = ConnectTCP(pAddr, nPort);
			break;
		}
		case CSimpleSocket::SocketTypeUdp:
		{
			bRetVal = ConnectUDP(pAddr, nPort);
			break;
		}
		case CSimpleSocket::SocketTypeRaw:
			break;
		default:
			break;
	}

	//--------------------------------------------------------------------------
	// If successful then create a local copy of the address and port
	//--------------------------------------------------------------------------
	if (bRetVal)
	{
		socklen_t nSockLen = sizeof(struct sockaddr);

		memset(&m_stServerSockaddr, 0, nSockLen);
		getpeername(m_socket, (struct sockaddr *)&m_stServerSockaddr, &nSockLen);

		nSockLen = sizeof(struct sockaddr);
		memset(&m_stClientSockaddr, 0, nSockLen);
		getsockname(m_socket, (struct sockaddr *)&m_stClientSockaddr, &nSockLen);

		SetSocketError(SocketSuccess);
	}

	return bRetVal;
}