Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
.. _helloshell-sample:
Hello Shell
###########
**This is a derived work from the original Zephyr "Hello World" example!**
**Most of the stuff in this README file needs to be redesigned and changed!**
Overview
********
A simple Hello World example that can be used with any supported board and
prints 'Hello World! I'm THE SHELL' to the console. This application can be
built into modes:
* basic command set
* fancy command set, with default enabled :kconfig:option:`CONFIG_BRIDLE_CMD_HELLO`
Requirements
************
.. zephyr-keep-sorted-start re(^\s+\* \|\w)
* One of the following development boards:
* |bridle:board:cytron_maker_nano_rp2040|
* |bridle:board:cytron_maker_pi_rp2040|
* |bridle:board:cytron_motion_2350_pro|
* |bridle:board:mini_usb_rp2040|
* |bridle:board:mini_usb_rp2350|
* |bridle:board:picoboy_color_plus|
* |bridle:board:picoboy_color|
* |bridle:board:picoboy|
* |bridle:board:seeeduino_cm0|
* |bridle:board:seeeduino_lotus|
* |bridle:board:vccgnd_bluepill|
* |bridle:board:waveshare_rp2040_eth|
* |bridle:board:waveshare_rp2040_geek|
* |bridle:board:waveshare_rp2040_lcd_0_96|
* |bridle:board:waveshare_rp2040_matrix|
* |bridle:board:waveshare_rp2040_one|
* |bridle:board:waveshare_rp2040_plus|
* |bridle:board:waveshare_rp2040_tiny|
* |bridle:board:waveshare_rp2040_zero|
* |bridle:board:waveshare_rp2350_can|
* |bridle:board:waveshare_rp2350_matrix|
* |bridle:board:weact_bluepillplus|
* |bridle:board:xiao_samd21|
* |zephyr:board:arduino_zero| or Bridle's |bridle:board:arduino_zero|
* |zephyr:board:mimxrt1010_evk| or Bridle's |bridle:board:mimxrt1010_evk|
* |zephyr:board:mimxrt1060_evk| or Bridle's |bridle:board:mimxrt1060_evk|
* |zephyr:board:mimxrt1170_evk| **with** Bridle's |bridle:board:mimxrt1170_evk|
* |zephyr:board:native_sim|
* |zephyr:board:nucleo_f303re| or Bridle's |bridle:board:nucleo_f303re|
* |zephyr:board:nucleo_f401re| or Bridle's |bridle:board:nucleo_f401re|
* |zephyr:board:nucleo_f413zh| or Bridle's |bridle:board:nucleo_f413zh|
* |zephyr:board:nucleo_f746zg| or Bridle's |bridle:board:nucleo_f746zg|
* |zephyr:board:nucleo_f767zi| or Bridle's |bridle:board:nucleo_f767zi|
* |zephyr:board:nucleo_l496zg| or Bridle's |bridle:board:nucleo_l496zg|
* |zephyr:board:qemu_arc|
* ARM Cortex-A9 Emulation (``qemu_cortex_a9``)
* |zephyr:board:qemu_cortex_a53|
* |zephyr:board:qemu_cortex_m0|
* |zephyr:board:qemu_cortex_m3|
* |zephyr:board:qemu_cortex_r5|
* |zephyr:board:qemu_kvm_arm64|
* |zephyr:board:qemu_leon3|
* |zephyr:board:qemu_malta|
* |zephyr:board:qemu_riscv32e|
* |zephyr:board:qemu_riscv32|
* |zephyr:board:qemu_riscv64|
* |zephyr:board:qemu_x86|
* |zephyr:board:qemu_xtensa|
* |zephyr:board:rpi_pico2| or Bridle's |bridle:board:rpi_pico2|
* |zephyr:board:rpi_pico| or Bridle's |bridle:board:rpi_pico|
* |zephyr:board:seeeduino_xiao| or Bridle's |bridle:board:seeeduino_xiao|
* |zephyr:board:xiao_rp2040| or Bridle's |bridle:board:xiao_rp2040|
* |zephyr:board:xiao_rp2350| or Bridle's |bridle:board:xiao_rp2350|
.. zephyr-keep-sorted-stop
Building and Running
********************
This project outputs 'Hello World! I'm THE SHELL' to the console. It can be
built and executed as emulation in |zephyr:board:qemu_x86| as follows:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-qemu_x86
:board: qemu_x86
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Exit QEMU by pressing :kbd:`CTRL+A` :kbd:`x`.
Also it can be built and executed on following targets:
* As |zephyr:board:native_sim|, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-native_sim
:board: native_sim
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Connect a terminal emulator to the given pseudotty or start the
application directly with the autoconnect argument:
.. code-block:: console
./build/helloshell-native_sim/zephyr/zephyr.exe -attach_uart
* As emulation in |zephyr:board:qemu_cortex_m3|, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-qemu_cortex_m3
:board: qemu_cortex_m3
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Exit QEMU by pressing :kbd:`CTRL+A` :kbd:`x`.
* On |zephyr:board:nucleo_f746zg| board, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:west-args: -p
:goals: flash
:host-os: unix
Further you can deside either to run in a basic or fancy command set
mode:
* On |zephyr:board:nucleo_f746zg| board, tiny command set mode for
an absolutely minimal environment (lowest memory footprint):
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-tiny.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, minimal command set mode for
basic system operations:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-minimal.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, helpful command set mode for
hardware startups and bug hunting:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-hwstartup.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, fancy command set mode
(implies :file:`prj.conf` merged with board specific configuration):
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:west-args: -p
:goals: flash
:host-os: unix
Sample Output
=============
(text in bold is a command input, text in angle brackets are keys to press)
.. container:: highlight highlight-console notranslate
.. parsed-literal::
Hello World! I'm THE SHELL from nucleo_f746zg
:bgn:`uart:~$` **<Tab>**
:bcy:`adc bridle clear dac date device devmem`
:bcy:`eeprom flash gpio hello help history hwinfo`
:bcy:`i2c kernel led log pwm regulator rem`
:bcy:`resize retval rtc sensor shell timer`
:bgn:`uart:~$` **help**
Please press the <Tab> button to see all available commands.
You can also use the <Tab> button to prompt or auto-complete all commands or its subcommands.
You can try to call commands with <-h> or <--help> parameter for more information.
Shell supports following meta-keys:
Ctrl + (a key from: abcdefklnpuw)
Alt + (a key from: bf)
Please refer to shell documentation for more details.
Available commands:
adc : ADC commands
bridle : Bridle commands.
clear : Clear screen.
dac : DAC shell commands
date : Date commands
device : Device commands
devmem : Read/write physical memory
Usage:
Read memory at address with optional width:
devmem address [width]
Write memory at address with mandatory width and value:
devmem address <width> <value>
eeprom : EEPROM shell commands
flash : Flash shell commands
gpio : GPIO commands
hello : say hello
help : Prints the help message.
history : Command history.
hwinfo : HWINFO commands
i2c : I2C commands
kernel : Kernel commands
led : LED commands
log : Commands for controlling logger
pwm : PWM shell commands
regulator : Regulator playground
rem : Ignore lines beginning with 'rem '
resize : Console gets terminal screen size or assumes default in case the
readout fails. It must be executed after each terminal width
change to ensure correct text display.
retval : Print return value of most recent command
sensor : Sensor commands
shell : Useful, not Unix-like shell commands.
timer : Timer commands
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **hello -h**
hello - say hello
:bgn:`uart:~$` **hello**
Hello from shell.
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel version**
Zephyr version |zephyr_version_number_em|
:bgn:`uart:~$` **bridle version**
Bridle version |shortversion_number_em|
:bgn:`uart:~$` **bridle version long**
Bridle version |longversion_number_em|
:bgn:`uart:~$` **bridle info**
Zephyr: |zephyr_release_number_em|
Bridle: |release_number_em|
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel uptime**
Uptime: 327750 ms
:bgn:`uart:~$` **kernel cycles**
cycles: 3586181929 hw cycles
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel thread list**
Scheduler: 792 since last call
Threads:
\*0x20010990 shell_uart
options: 0x0, priority: 14 timeout: 0
state: queued, entry: 0x8005025
stack size 2048, unused 1008, usage 1040 / 2048 (50 %)
0x20010d10
options: 0x0, priority: 0 timeout: 0
state: pending, entry: 0x8006d09
stack size 1024, unused 832, usage 192 / 1024 (18 %)
0x20010490 logging
options: 0x0, priority: 14 timeout: 0
state: pending, entry: 0x8002aed
stack size 768, unused 568, usage 200 / 768 (26 %)
0x20011610 idle
options: 0x1, priority: 15 timeout: 0
state: , entry: 0x8015079
stack size 320, unused 256, usage 64 / 320 (20 %)
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel thread stacks**
0x20010990 shell_uart (real size 2048): unused 1008 usage 1040 / 2048 (50 %)
0x20010d10 (real size 1024): unused 832 usage 192 / 1024 (18 %)
0x20010490 logging (real size 768): unused 568 usage 200 / 768 (26 %)
0x20011610 idle (real size 320): unused 256 usage 64 / 320 (20 %)
0x20015900 IRQ 00 (real size 2048): unused 1752 usage 296 / 2048 (14 %)
TCP/IP Network over Wi-Fi on the RPi Pico W or 2W
=================================================
This project provides an extended board-specific configuration
for the |RPi Pico W| or |RPi Pico 2W| with a pre-activated
:external+zephyr:ref:`TCP/IP network stack <network_stack_architecture>`
via the Infineon 2.4GHz Wi-Fi chip.
For the |RPi Pico W|, also with |bridle:board:rpi_pico|:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico_w
:board: rpi_pico/rp2040/w
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico_w
:board: rpi_pico/rp2040/w/bbe
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
For the |RPi Pico 2W|, also with |bridle:board:rpi_pico2|:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico2_w
:board: rpi_pico2/rp2350a/m33_0/w
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico2_w
:board: rpi_pico2/rp2350a/m33_0/w/bbe
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
You should see the following message on the console (e.g. on |RPi Pico W|):
.. container:: highlight highlight-console notranslate
.. parsed-literal::
[3440] WLAN MAC Address : 29:F7:28:FC:67:1C
[3443] WLAN Firmware : wl0: Jun 5 2024 06:33:59 version 7.95.88 (cf1d613 CY) FWID 01-7b7cf51a
[3447] WLAN CLM : API: 12.2 Data: 9.10.39 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2024-04-16 21:20:55
[3447] WHD VERSION : 3.3.3.26653
[3447] : WIFI5-v3.3.3
[3447] : GCC 14.3
[3447] : 2025-04-14 03:18:50 +0000
\*\*\* Booting Zephyr OS build |zephyr_version_em|\ *…*\*\*\*
Hello World! I'm THE SHELL from rpi_pico
[00:00:03.473,000] <inf> net_config: Initializing network
[00:00:03.473,000] <inf> net_config: Waiting interface 1 (0x200014e8) to be up...
Simple test execution on target
-------------------------------
(text in bold is a command input)
.. admonition:: Network connect over Wi-Fi chip with system date before and after
:class: note dropdown toggle-shown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **date get**
1970-01-01 00:00:29 UTC
:brd:`Replace` the values :command:`<key_management>`, :command:`<SSID>`
and :command:`<passphrase>` with your own, e.g. :command:`-k 1` for
:emphasis:`WPA2-PSK`! Use the command :command:`wifi connect` without
parameters to see online help with more details.
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi connect -s <SSID> -k <key_management> -p <passphrase>**
Connected
Connection requested
[00:00:13.732,000] <inf> net_config: Interface 1 (0x200014e8) coming up
[00:00:13.733,000] <inf> net_config: Running dhcpv4 client...
[00:00:13.733,000] <inf> net_config: Running dhcpv6 client...
[00:00:13.831,000] <inf> net_dhcpv4: Received: **192.168.10.197**
[00:00:13.832,000] <inf> net_config: IPv4 address: **192.168.10.197**
[00:00:13.832,000] <inf> net_config: Lease time: 28800 seconds
[00:00:13.833,000] <inf> net_config: Subnet: 255.255.255.0
[00:00:13.833,000] <inf> net_config: Router: 192.168.10.1
[00:00:13.854,000] <inf> net_config: IPv6 address: fe80::2acd:c1ff:fe02:74ea
[00:00:14.040,000] <inf> net_config: IPv6 address: fd9c:33d7:ba99:0:2acd:c1ff:fe02:74ea
[00:00:21.470,000] <inf> net_dhcpv6: TID mismatch
[00:00:21.472,000] <inf> net_dhcpv6: TID mismatch
[00:00:21.496,000] :brd:`<err> net_dhcpv6: Failed to configure DHCPv6 address`
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **date get**
2026-07-16 20:46:28 UTC
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net iface**
Default interface: 1
Interface wlan0 (0x200014e8) (WiFi) [1]
===============================
Link addr : **29:F7:28:FC:67:1C**
MTU : 1500
Flags : AUTO_START,IPv4,IPv6
Device : **airoc-wifi@0** (0x10053148)
Status : oper=UP, admin=UP, carrier=ON
Ethernet capabilities supported:
MAC address filtering
Ethernet PHY device: <none> (0)
IPv6 unicast addresses (max 2):
fe80::2acd:c1ff:fe02:74f4 autoconf preferred infinite
fd9c:33d7:ba99:0:2acd:c1ff:fe02:74f4 autoconf preferred infinite
IPv6 multicast addresses (max 3):
ff02::1
ff02::1:ff02:74f4
IPv6 prefixes (max 2):
fd9c:33d7:ba99::/64 infinite
IPv6 hop limit : 64
IPv6 base reachable time : 30000
IPv6 reachable time : 20783
IPv6 retransmit timer : 0
DHCPv6 state : disabled
IPv4 unicast addresses (max 1):
**192.168.10.197**/255.255.255.0 DHCP preferred
IPv4 multicast addresses (max 2):
224.0.0.1
IPv4 gateway : 192.168.10.1
DHCPv4 lease time : 28800
DHCPv4 renew time : 14400
DHCPv4 server : 192.168.10.10
DHCPv4 requested : 192.168.10.197
DHCPv4 state : bound
DHCPv4 attempts : 1
DHCPv4 state : bound
.. admonition:: DNS server list and name lookup query
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net dns**
DNS servers:
192.168.10.10:53 via wlan0 (DHCP)
192.168.10.20:53 via wlan0 (DHCP)
[fd9c:33d7:ba99::1]:53 via wlan0 (IPv6 RA)
Pending queries:
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net dns query google.com**
Query for 'google.com' sent.
dns: 142.250.154.138
dns: 142.250.154.102
dns: 142.250.154.113
dns: 142.250.154.101
dns: 142.250.154.139
dns: 142.250.154.100
dns: All results received
.. admonition:: ICMP/Ping check in WAN and LAN
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 8.8.8.8**
PING 8.8.8.8
28 bytes from 8.8.8.8 to 192.168.10.197: icmp_seq=1 ttl=118 time=25 ms
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 192.168.10.1**
PING 192.168.10.1
28 bytes from 192.168.10.1 to 192.168.10.197: icmp_seq=1 ttl=64 time=9 ms
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 fd9c:33d7:ba99::1**
PING fd9c:33d7:ba99::1
8 bytes from fd9c:33d7:ba99::1 to fd9c:33d7:ba99:0:2acd:c1ff:fe02:74f4: icmp_seq=1 ttl=64 time=15 ms
.. admonition:: ARP list, list of connections, and interface statistics
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net arp**
Interface Link Address
[ 0] 1 BC:EE:7B:32:E5:D0 192.168.10.1
[ 1] 1 00:80:77:84:BF:81 192.168.10.10
.. parsed-literal::
:bgn:`uart:~$` **net conn**
Context Iface Flags Local Remote
[ 1] 0x20005c8c 1 4DU 0.0.0.0:42759 0.0.0.0:0
[ 2] 0x20005d3c 1 4DU 0.0.0.0:38313 0.0.0.0:0
[ 3] 0x20005dec 1 6DU [::]:38774 [::]:0
Handler Callback Proto Local Remote
[ 1] 0x20006510 0x10024b79 UDP [::]:38774 [::]:0
[ 2] 0x200065a0 0x10024b79 UDP 0.0.0.0:38313 0.0.0.0:0
[ 3] 0x20006558 0x10024b79 UDP 0.0.0.0:42759 0.0.0.0:0
[ 4] 0x200065e8 0x10030165 UDP [::]:546 [::]:0
[ 5] 0x20006630 0x100310d9 UDP 0.0.0.0:68 0.0.0.0:0
TCP Context Src port Dst port Send-Seq Send-Ack MSS State
No TCP connections
:bgn:`Set CONFIG_NET_TCP_LOG_LEVEL_DBG to enable TCP debugging support.`
.. parsed-literal::
:bgn:`uart:~$` **net stats**
Interface 0x200014e8 (WiFi) [1]
===============================
IPv6 recv 34 sent 38 drop 3 forwarded 0
IPv6 ND recv 21 sent 22 drop 1
IPv6 MLD recv 0 sent 2 drop 0
IPv4 recv 40 sent 39 drop 2 forwarded 0
IP vhlerr 49 hblener 0 lblener 0
IP fragerr 0 chkerr 0 protoer 49
ICMP recv 61 sent 64 drop 0
ICMP typeer 0 chkerr 0
IGMP recv 0 sent 0 drop 0
UDP recv 8 sent 8 drop 5
UDP chkerr 0
TCP bytes recv 0 sent 0 resent 0
TCP seg recv 0 sent 0 drop 0
TCP seg resent 0 chkerr 0 ackerr 0
TCP seg rsterr 0 rst 0
TCP conn drop 0 connrst 0
TCP pkt drop 0
DNS recv 3 sent 4 drop 1
Bytes received 42752
Bytes sent 6278
Processing err 11
.. admonition:: Wi-Fi interface statistics and SSID scan
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi statistics**
Statistics for Wi-Fi interface 0x200014e8 [1]
Bytes received : 45148
Bytes sent : 6622
Packets received : 163
Packets sent : 96
Receive errors : 0
Send errors : 0
Bcast received : 0
Bcast sent : 0
Mcast received : 0
Mcast sent : 0
Beacons received : 0
Beacons missed : 0
Unicast received : 0
Unicast sent : 0
Overrun count : 0
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi status**
Status: successful
==================
State: COMPLETED
Interface Mode: STATION
Link Mode: WIFI 4 (802.11n/HT)
SSID: <SSID>
BSSID: 13:E1:30:36:C8:2F
Band: 2.4GHz
Channel: 1
Security: WPA2-PSK
MFP: Disable
RSSI: -57
Beacon Interval: 100
DTIM: 2
TWT: Not supported
Current PHY TX rate (Mbps) : 144.0
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi scan**
Scan requested
Num | SSID (len) | Chan (Band) | RSSI | Security | BSSID | MFP
1 | FRITZ!Box 7490 MK 17 | 1 (2.4GHz) | -80 | WPA2-PSK | F0:B0:14:BA:EE:C7 | Disable
2 | WLAN-985778 11 | 6 (2.4GHz) | -80 | WPA2-PSK | BC:30:D9:47:0A:F8 | Disable
3 | PYUR-X852J6 11 | 6 (2.4GHz) | -86 | WPA/WPA2/WPA3 PSK | A0:3C:20:34:0C:F5 | Disable
4 | MagentaWLAN-YR3U 16 | 6 (2.4GHz) | -80 | WPA/WPA2/WPA3 PSK | 4C:22:F3:60:E6:CE | Disable
5 | Fallschirm Gast 15 | 7 (2.4GHz) | -76 | WPA2-PSK | 4A:5D:35:6C:F9:CF | Disable
6 | Fallschirm 10 | 7 (2.4GHz) | -75 | WPA2-PSK | 48:5D:35:6C:F9:CF | Disable
7 | o2-WLAN65 9 | 10 (2.4GHz) | -93 | WPA2-PSK | 4C:1B:86:29:D8:B1 | Disable
8 | FRITZ!Box 7430 SH 17 | 11 (2.4GHz) | -81 | WPA2-PSK | F0:B0:14:28:E2:AF | Disable
9 | FRITZ!Box 7430 SH 17 | 11 (2.4GHz) | -81 | WPA2-PSK | F0:B0:14:28:E2:AF | Disable
Scan request done
55022eb50This file is pinned to the selected release. Download the original to open it in your design tool.