Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
55022eb50This file is pinned to the selected release. Download the original to open it in your design tool.
.. _helloshell-sample:
Hello Shell
###########
**This is a derived work from the original Zephyr "Hello World" example!**
**Most of the stuff in this README file needs to be redesigned and changed!**
Overview
********
A simple Hello World example that can be used with any supported board and
prints 'Hello World! I'm THE SHELL' to the console. This application can be
built into modes:
* basic command set
* fancy command set, with default enabled :kconfig:option:`CONFIG_BRIDLE_CMD_HELLO`
Requirements
************
.. zephyr-keep-sorted-start re(^\s+\* \|\w)
* One of the following development boards:
* |bridle:board:cytron_maker_nano_rp2040|
* |bridle:board:cytron_maker_pi_rp2040|
* |bridle:board:cytron_motion_2350_pro|
* |bridle:board:mini_usb_rp2040|
* |bridle:board:mini_usb_rp2350|
* |bridle:board:picoboy_color_plus|
* |bridle:board:picoboy_color|
* |bridle:board:picoboy|
* |bridle:board:seeeduino_cm0|
* |bridle:board:seeeduino_lotus|
* |bridle:board:vccgnd_bluepill|
* |bridle:board:waveshare_rp2040_eth|
* |bridle:board:waveshare_rp2040_geek|
* |bridle:board:waveshare_rp2040_lcd_0_96|
* |bridle:board:waveshare_rp2040_matrix|
* |bridle:board:waveshare_rp2040_one|
* |bridle:board:waveshare_rp2040_plus|
* |bridle:board:waveshare_rp2040_tiny|
* |bridle:board:waveshare_rp2040_zero|
* |bridle:board:waveshare_rp2350_can|
* |bridle:board:waveshare_rp2350_matrix|
* |bridle:board:weact_bluepillplus|
* |bridle:board:xiao_samd21|
* |zephyr:board:arduino_zero| or Bridle's |bridle:board:arduino_zero|
* |zephyr:board:mimxrt1010_evk| or Bridle's |bridle:board:mimxrt1010_evk|
* |zephyr:board:mimxrt1060_evk| or Bridle's |bridle:board:mimxrt1060_evk|
* |zephyr:board:mimxrt1170_evk| **with** Bridle's |bridle:board:mimxrt1170_evk|
* |zephyr:board:native_sim|
* |zephyr:board:nucleo_f303re| or Bridle's |bridle:board:nucleo_f303re|
* |zephyr:board:nucleo_f401re| or Bridle's |bridle:board:nucleo_f401re|
* |zephyr:board:nucleo_f413zh| or Bridle's |bridle:board:nucleo_f413zh|
* |zephyr:board:nucleo_f746zg| or Bridle's |bridle:board:nucleo_f746zg|
* |zephyr:board:nucleo_f767zi| or Bridle's |bridle:board:nucleo_f767zi|
* |zephyr:board:nucleo_l496zg| or Bridle's |bridle:board:nucleo_l496zg|
* |zephyr:board:qemu_arc|
* ARM Cortex-A9 Emulation (``qemu_cortex_a9``)
* |zephyr:board:qemu_cortex_a53|
* |zephyr:board:qemu_cortex_m0|
* |zephyr:board:qemu_cortex_m3|
* |zephyr:board:qemu_cortex_r5|
* |zephyr:board:qemu_kvm_arm64|
* |zephyr:board:qemu_leon3|
* |zephyr:board:qemu_malta|
* |zephyr:board:qemu_riscv32e|
* |zephyr:board:qemu_riscv32|
* |zephyr:board:qemu_riscv64|
* |zephyr:board:qemu_x86|
* |zephyr:board:qemu_xtensa|
* |zephyr:board:rpi_pico2| or Bridle's |bridle:board:rpi_pico2|
* |zephyr:board:rpi_pico| or Bridle's |bridle:board:rpi_pico|
* |zephyr:board:seeeduino_xiao| or Bridle's |bridle:board:seeeduino_xiao|
* |zephyr:board:xiao_rp2040| or Bridle's |bridle:board:xiao_rp2040|
* |zephyr:board:xiao_rp2350| or Bridle's |bridle:board:xiao_rp2350|
.. zephyr-keep-sorted-stop
Building and Running
********************
This project outputs 'Hello World! I'm THE SHELL' to the console. It can be
built and executed as emulation in |zephyr:board:qemu_x86| as follows:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-qemu_x86
:board: qemu_x86
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Exit QEMU by pressing :kbd:`CTRL+A` :kbd:`x`.
Also it can be built and executed on following targets:
* As |zephyr:board:native_sim|, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-native_sim
:board: native_sim
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Connect a terminal emulator to the given pseudotty or start the
application directly with the autoconnect argument:
.. code-block:: console
./build/helloshell-native_sim/zephyr/zephyr.exe -attach_uart
* As emulation in |zephyr:board:qemu_cortex_m3|, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-qemu_cortex_m3
:board: qemu_cortex_m3
:west-args: -p
:goals: run
:host-os: unix
.. hint:: Exit QEMU by pressing :kbd:`CTRL+A` :kbd:`x`.
* On |zephyr:board:nucleo_f746zg| board, fancy command set mode:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:west-args: -p
:goals: flash
:host-os: unix
Further you can deside either to run in a basic or fancy command set
mode:
* On |zephyr:board:nucleo_f746zg| board, tiny command set mode for
an absolutely minimal environment (lowest memory footprint):
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-tiny.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, minimal command set mode for
basic system operations:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-minimal.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, helpful command set mode for
hardware startups and bug hunting:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:gen-args: -DEXTRA_CONF_FILE="prj-hwstartup.conf"
:west-args: -p
:goals: flash
:host-os: unix
* On |zephyr:board:nucleo_f746zg| board, fancy command set mode
(implies :file:`prj.conf` merged with board specific configuration):
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-nucleo_f746zg
:board: nucleo_f746zg
:west-args: -p
:goals: flash
:host-os: unix
Sample Output
=============
(text in bold is a command input, text in angle brackets are keys to press)
.. container:: highlight highlight-console notranslate
.. parsed-literal::
Hello World! I'm THE SHELL from nucleo_f746zg
:bgn:`uart:~$` **<Tab>**
:bcy:`adc bridle clear dac date device devmem`
:bcy:`eeprom flash gpio hello help history hwinfo`
:bcy:`i2c kernel led log pwm regulator rem`
:bcy:`resize retval rtc sensor shell timer`
:bgn:`uart:~$` **help**
Please press the <Tab> button to see all available commands.
You can also use the <Tab> button to prompt or auto-complete all commands or its subcommands.
You can try to call commands with <-h> or <--help> parameter for more information.
Shell supports following meta-keys:
Ctrl + (a key from: abcdefklnpuw)
Alt + (a key from: bf)
Please refer to shell documentation for more details.
Available commands:
adc : ADC commands
bridle : Bridle commands.
clear : Clear screen.
dac : DAC shell commands
date : Date commands
device : Device commands
devmem : Read/write physical memory
Usage:
Read memory at address with optional width:
devmem address [width]
Write memory at address with mandatory width and value:
devmem address <width> <value>
eeprom : EEPROM shell commands
flash : Flash shell commands
gpio : GPIO commands
hello : say hello
help : Prints the help message.
history : Command history.
hwinfo : HWINFO commands
i2c : I2C commands
kernel : Kernel commands
led : LED commands
log : Commands for controlling logger
pwm : PWM shell commands
regulator : Regulator playground
rem : Ignore lines beginning with 'rem '
resize : Console gets terminal screen size or assumes default in case the
readout fails. It must be executed after each terminal width
change to ensure correct text display.
retval : Print return value of most recent command
sensor : Sensor commands
shell : Useful, not Unix-like shell commands.
timer : Timer commands
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **hello -h**
hello - say hello
:bgn:`uart:~$` **hello**
Hello from shell.
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel version**
Zephyr version |zephyr_version_number_em|
:bgn:`uart:~$` **bridle version**
Bridle version |shortversion_number_em|
:bgn:`uart:~$` **bridle version long**
Bridle version |longversion_number_em|
:bgn:`uart:~$` **bridle info**
Zephyr: |zephyr_release_number_em|
Bridle: |release_number_em|
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel uptime**
Uptime: 327750 ms
:bgn:`uart:~$` **kernel cycles**
cycles: 3586181929 hw cycles
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel thread list**
Scheduler: 792 since last call
Threads:
\*0x20010990 shell_uart
options: 0x0, priority: 14 timeout: 0
state: queued, entry: 0x8005025
stack size 2048, unused 1008, usage 1040 / 2048 (50 %)
0x20010d10
options: 0x0, priority: 0 timeout: 0
state: pending, entry: 0x8006d09
stack size 1024, unused 832, usage 192 / 1024 (18 %)
0x20010490 logging
options: 0x0, priority: 14 timeout: 0
state: pending, entry: 0x8002aed
stack size 768, unused 568, usage 200 / 768 (26 %)
0x20011610 idle
options: 0x1, priority: 15 timeout: 0
state: , entry: 0x8015079
stack size 320, unused 256, usage 64 / 320 (20 %)
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **kernel thread stacks**
0x20010990 shell_uart (real size 2048): unused 1008 usage 1040 / 2048 (50 %)
0x20010d10 (real size 1024): unused 832 usage 192 / 1024 (18 %)
0x20010490 logging (real size 768): unused 568 usage 200 / 768 (26 %)
0x20011610 idle (real size 320): unused 256 usage 64 / 320 (20 %)
0x20015900 IRQ 00 (real size 2048): unused 1752 usage 296 / 2048 (14 %)
TCP/IP Network over Wi-Fi on the RPi Pico W or 2W
=================================================
This project provides an extended board-specific configuration
for the |RPi Pico W| or |RPi Pico 2W| with a pre-activated
:external+zephyr:ref:`TCP/IP network stack <network_stack_architecture>`
via the Infineon 2.4GHz Wi-Fi chip.
For the |RPi Pico W|, also with |bridle:board:rpi_pico|:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico_w
:board: rpi_pico/rp2040/w
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico_w
:board: rpi_pico/rp2040/w/bbe
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
For the |RPi Pico 2W|, also with |bridle:board:rpi_pico2|:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico2_w
:board: rpi_pico2/rp2350a/m33_0/w
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
.. zephyr-app-commands::
:app: bridle/samples/helloshell
:build-dir: helloshell-rpi_pico2_w
:board: rpi_pico2/rp2350a/m33_0/w/bbe
:snippets: usb-console
:west-args: -p
:flash-args: -r uf2
:goals: flash
:host-os: unix
:compact:
You should see the following message on the console (e.g. on |RPi Pico W|):
.. container:: highlight highlight-console notranslate
.. parsed-literal::
[3440] WLAN MAC Address : 29:F7:28:FC:67:1C
[3443] WLAN Firmware : wl0: Jun 5 2024 06:33:59 version 7.95.88 (cf1d613 CY) FWID 01-7b7cf51a
[3447] WLAN CLM : API: 12.2 Data: 9.10.39 Compiler: 1.29.4 ClmImport: 1.36.3 Creation: 2024-04-16 21:20:55
[3447] WHD VERSION : 3.3.3.26653
[3447] : WIFI5-v3.3.3
[3447] : GCC 14.3
[3447] : 2025-04-14 03:18:50 +0000
\*\*\* Booting Zephyr OS build |zephyr_version_em|\ *…*\*\*\*
Hello World! I'm THE SHELL from rpi_pico
[00:00:03.473,000] <inf> net_config: Initializing network
[00:00:03.473,000] <inf> net_config: Waiting interface 1 (0x200014e8) to be up...
Simple test execution on target
-------------------------------
(text in bold is a command input)
.. admonition:: Network connect over Wi-Fi chip with system date before and after
:class: note dropdown toggle-shown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **date get**
1970-01-01 00:00:29 UTC
:brd:`Replace` the values :command:`<key_management>`, :command:`<SSID>`
and :command:`<passphrase>` with your own, e.g. :command:`-k 1` for
:emphasis:`WPA2-PSK`! Use the command :command:`wifi connect` without
parameters to see online help with more details.
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi connect -s <SSID> -k <key_management> -p <passphrase>**
Connected
Connection requested
[00:00:13.732,000] <inf> net_config: Interface 1 (0x200014e8) coming up
[00:00:13.733,000] <inf> net_config: Running dhcpv4 client...
[00:00:13.733,000] <inf> net_config: Running dhcpv6 client...
[00:00:13.831,000] <inf> net_dhcpv4: Received: **192.168.10.197**
[00:00:13.832,000] <inf> net_config: IPv4 address: **192.168.10.197**
[00:00:13.832,000] <inf> net_config: Lease time: 28800 seconds
[00:00:13.833,000] <inf> net_config: Subnet: 255.255.255.0
[00:00:13.833,000] <inf> net_config: Router: 192.168.10.1
[00:00:13.854,000] <inf> net_config: IPv6 address: fe80::2acd:c1ff:fe02:74ea
[00:00:14.040,000] <inf> net_config: IPv6 address: fd9c:33d7:ba99:0:2acd:c1ff:fe02:74ea
[00:00:21.470,000] <inf> net_dhcpv6: TID mismatch
[00:00:21.472,000] <inf> net_dhcpv6: TID mismatch
[00:00:21.496,000] :brd:`<err> net_dhcpv6: Failed to configure DHCPv6 address`
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **date get**
2026-07-16 20:46:28 UTC
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net iface**
Default interface: 1
Interface wlan0 (0x200014e8) (WiFi) [1]
===============================
Link addr : **29:F7:28:FC:67:1C**
MTU : 1500
Flags : AUTO_START,IPv4,IPv6
Device : **airoc-wifi@0** (0x10053148)
Status : oper=UP, admin=UP, carrier=ON
Ethernet capabilities supported:
MAC address filtering
Ethernet PHY device: <none> (0)
IPv6 unicast addresses (max 2):
fe80::2acd:c1ff:fe02:74f4 autoconf preferred infinite
fd9c:33d7:ba99:0:2acd:c1ff:fe02:74f4 autoconf preferred infinite
IPv6 multicast addresses (max 3):
ff02::1
ff02::1:ff02:74f4
IPv6 prefixes (max 2):
fd9c:33d7:ba99::/64 infinite
IPv6 hop limit : 64
IPv6 base reachable time : 30000
IPv6 reachable time : 20783
IPv6 retransmit timer : 0
DHCPv6 state : disabled
IPv4 unicast addresses (max 1):
**192.168.10.197**/255.255.255.0 DHCP preferred
IPv4 multicast addresses (max 2):
224.0.0.1
IPv4 gateway : 192.168.10.1
DHCPv4 lease time : 28800
DHCPv4 renew time : 14400
DHCPv4 server : 192.168.10.10
DHCPv4 requested : 192.168.10.197
DHCPv4 state : bound
DHCPv4 attempts : 1
DHCPv4 state : bound
.. admonition:: DNS server list and name lookup query
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net dns**
DNS servers:
192.168.10.10:53 via wlan0 (DHCP)
192.168.10.20:53 via wlan0 (DHCP)
[fd9c:33d7:ba99::1]:53 via wlan0 (IPv6 RA)
Pending queries:
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net dns query google.com**
Query for 'google.com' sent.
dns: 142.250.154.138
dns: 142.250.154.102
dns: 142.250.154.113
dns: 142.250.154.101
dns: 142.250.154.139
dns: 142.250.154.100
dns: All results received
.. admonition:: ICMP/Ping check in WAN and LAN
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 8.8.8.8**
PING 8.8.8.8
28 bytes from 8.8.8.8 to 192.168.10.197: icmp_seq=1 ttl=118 time=25 ms
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 192.168.10.1**
PING 192.168.10.1
28 bytes from 192.168.10.1 to 192.168.10.197: icmp_seq=1 ttl=64 time=9 ms
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net ping -p 0 -c 1 fd9c:33d7:ba99::1**
PING fd9c:33d7:ba99::1
8 bytes from fd9c:33d7:ba99::1 to fd9c:33d7:ba99:0:2acd:c1ff:fe02:74f4: icmp_seq=1 ttl=64 time=15 ms
.. admonition:: ARP list, list of connections, and interface statistics
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **net arp**
Interface Link Address
[ 0] 1 BC:EE:7B:32:E5:D0 192.168.10.1
[ 1] 1 00:80:77:84:BF:81 192.168.10.10
.. parsed-literal::
:bgn:`uart:~$` **net conn**
Context Iface Flags Local Remote
[ 1] 0x20005c8c 1 4DU 0.0.0.0:42759 0.0.0.0:0
[ 2] 0x20005d3c 1 4DU 0.0.0.0:38313 0.0.0.0:0
[ 3] 0x20005dec 1 6DU [::]:38774 [::]:0
Handler Callback Proto Local Remote
[ 1] 0x20006510 0x10024b79 UDP [::]:38774 [::]:0
[ 2] 0x200065a0 0x10024b79 UDP 0.0.0.0:38313 0.0.0.0:0
[ 3] 0x20006558 0x10024b79 UDP 0.0.0.0:42759 0.0.0.0:0
[ 4] 0x200065e8 0x10030165 UDP [::]:546 [::]:0
[ 5] 0x20006630 0x100310d9 UDP 0.0.0.0:68 0.0.0.0:0
TCP Context Src port Dst port Send-Seq Send-Ack MSS State
No TCP connections
:bgn:`Set CONFIG_NET_TCP_LOG_LEVEL_DBG to enable TCP debugging support.`
.. parsed-literal::
:bgn:`uart:~$` **net stats**
Interface 0x200014e8 (WiFi) [1]
===============================
IPv6 recv 34 sent 38 drop 3 forwarded 0
IPv6 ND recv 21 sent 22 drop 1
IPv6 MLD recv 0 sent 2 drop 0
IPv4 recv 40 sent 39 drop 2 forwarded 0
IP vhlerr 49 hblener 0 lblener 0
IP fragerr 0 chkerr 0 protoer 49
ICMP recv 61 sent 64 drop 0
ICMP typeer 0 chkerr 0
IGMP recv 0 sent 0 drop 0
UDP recv 8 sent 8 drop 5
UDP chkerr 0
TCP bytes recv 0 sent 0 resent 0
TCP seg recv 0 sent 0 drop 0
TCP seg resent 0 chkerr 0 ackerr 0
TCP seg rsterr 0 rst 0
TCP conn drop 0 connrst 0
TCP pkt drop 0
DNS recv 3 sent 4 drop 1
Bytes received 42752
Bytes sent 6278
Processing err 11
.. admonition:: Wi-Fi interface statistics and SSID scan
:class: note dropdown
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi statistics**
Statistics for Wi-Fi interface 0x200014e8 [1]
Bytes received : 45148
Bytes sent : 6622
Packets received : 163
Packets sent : 96
Receive errors : 0
Send errors : 0
Bcast received : 0
Bcast sent : 0
Mcast received : 0
Mcast sent : 0
Beacons received : 0
Beacons missed : 0
Unicast received : 0
Unicast sent : 0
Overrun count : 0
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi status**
Status: successful
==================
State: COMPLETED
Interface Mode: STATION
Link Mode: WIFI 4 (802.11n/HT)
SSID: <SSID>
BSSID: 13:E1:30:36:C8:2F
Band: 2.4GHz
Channel: 1
Security: WPA2-PSK
MFP: Disable
RSSI: -57
Beacon Interval: 100
DTIM: 2
TWT: Not supported
Current PHY TX rate (Mbps) : 144.0
.. container:: highlight highlight-console notranslate
.. parsed-literal::
:bgn:`uart:~$` **wifi scan**
Scan requested
Num | SSID (len) | Chan (Band) | RSSI | Security | BSSID | MFP
1 | FRITZ!Box 7490 MK 17 | 1 (2.4GHz) | -80 | WPA2-PSK | F0:B0:14:BA:EE:C7 | Disable
2 | WLAN-985778 11 | 6 (2.4GHz) | -80 | WPA2-PSK | BC:30:D9:47:0A:F8 | Disable
3 | PYUR-X852J6 11 | 6 (2.4GHz) | -86 | WPA/WPA2/WPA3 PSK | A0:3C:20:34:0C:F5 | Disable
4 | MagentaWLAN-YR3U 16 | 6 (2.4GHz) | -80 | WPA/WPA2/WPA3 PSK | 4C:22:F3:60:E6:CE | Disable
5 | Fallschirm Gast 15 | 7 (2.4GHz) | -76 | WPA2-PSK | 4A:5D:35:6C:F9:CF | Disable
6 | Fallschirm 10 | 7 (2.4GHz) | -75 | WPA2-PSK | 48:5D:35:6C:F9:CF | Disable
7 | o2-WLAN65 9 | 10 (2.4GHz) | -93 | WPA2-PSK | 4C:1B:86:29:D8:B1 | Disable
8 | FRITZ!Box 7430 SH 17 | 11 (2.4GHz) | -81 | WPA2-PSK | F0:B0:14:28:E2:AF | Disable
9 | FRITZ!Box 7430 SH 17 | 11 (2.4GHz) | -81 | WPA2-PSK | F0:B0:14:28:E2:AF | Disable
Scan request done