3dobjects

/*
 * ** NOTES **
 * Print with:
 *   - 1 layer raft
 *   - 100% infill
 *   - .3mm layer height (seems to work fine) or less
*/

include <hose_connector.scad>;

$fn=100;

CPT = 1; /* connecting plate thickness */
CPD = 35; /* connecting plate diameter */
HCO = 4.0; /* hose connector offset */
HC1_R0 = 1.75; /* r0 for hose connector 1 */
HC1_R1 = 2.50; /* r1 for hose connector 1 */
HC1_R2 = 3.00; /* r2 for hose connector 1 */
HC1_L = 2.00; /* l for hose connector 1 */
HC1_N = 4; /* N for hose connector 1 */
HC1_BR = 6.00; /* base radius for hose connector 1 */
HC1_BH = 4.00; /* base height for hose connector 1 */
HC2_R0 = 1.75; /* r0 for hose connector 1 */
HC2_R1 = 2.50; /* r1 for hose connector 1 */
HC2_R2 = 3.00; /* r2 for hose connector 1 */
HC2_L = 2.00; /* l for hose connector 2 */
HC2_N = 4; /* N for hose connector 2 */
HC2_BR = 6.00; /* base radius for hose connector 2 */
HC2_BH = 4.00; /* base height for hose connector 2 */

module connectors_with_plate(second) {
    /* Connecting plate: */
    difference() {
        union() {
            cylinder(h=CPT, d=CPD);
            hull() {
                translate([-HCO,0,CPT]) cylinder(r1=HC1_BR, r2=HC1_R2, h=HC1_BH);
                translate([+HCO,0,CPT]) cylinder(r1=HC2_BR, r2=HC2_R2, h=HC2_BH);
            }
        }
        translate([-HCO,0,0])
            cylinder(h=3*(CPT+HC1_BH), r=HC1_R0, center=true);
        translate([HCO,0,0])
            cylinder(h=3*(CPT+HC2_BH), r=HC2_R0, center=true);
    }
    /* Actual hose connectors: */
    translate([-HCO,0,CPT]) {
        translate([0,0,HC1_BH])
        hose_connector(HC1_R0, HC1_R1, HC1_R2, HC1_L, HC1_N);
    }
    if (second) {
        translate([+HCO,0,CPT]) {
            translate([0,0,HC2_BH])
            hose_connector(HC2_R0, HC2_R1, HC2_R2, HC2_L, HC2_N);
        }
    }
}

translate([0,0,13]) {
    rotate([180,0,0]) connectors_with_plate(true);
    connectors_with_plate(false);
}