Xbox-USB-C-PSU

The first ever USB C PSU for the original Xbox

NOTE:

This board currently supports all 3 Xbox motherboard revisions, but requires a different BOM for 009 and 012 than 121. If you don't know what revision your Xbox is, you can find out with this guide: https://www.herringhardware.com/xboxrevisions

REPO STRUCTURE:

All source files for the PCB are contained within the respective folder for each of the 3 official Xbox PCB revions, -121 to start with, and -009 and -012 will be added soon. Production files to manufacture the PCBs are located in Releases

PCB SPECS:

• 4 layers
• 151.739x39.78mm
• 1oz copper (all layers), heat issues may result from skimping on this
• filled vias (VIPPO) for assembly reasons due to via in pad

LICENSE:

Licensed under the TAPR Open hardware license (www.tapr.org/OHL)

©Redherring32 2025

DISCLAIMER:

I offer this with no warranty, express or implied, and I am NOT responsible for anything that may happen as a result of misuse of this PCB. You have been warned.