Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/*
* i2c.c
*
* Created on: Oct 27, 2016
* Author: Bumsik Kim
*/
#include "common_source.h"
#include "i2c.h"
#include "alternate_pins.h"
// base name change. Used with msg(). See @base.h
#ifdef KB_MSG_BASE
#undef KB_MSG_BASE
#define KB_MSG_BASE "I2C"
#endif
static I2C_HandleTypeDef *get_handler (i2c_t i2c);
static void enable_i2c_clk_ (i2c_t i2c);
#if defined(STM32F446xx)
static I2C_HandleTypeDef i2c_1_h_ = {.Instance = I2C1};
static I2C_HandleTypeDef i2c_2_h_ = {.Instance = I2C2};
static I2C_HandleTypeDef i2c_3_h_ = {.Instance = I2C3};
#else
#error "Please define device! " __FILE__ "\n"
#endif
int i2c_init(i2c_t i2c, i2c_init_t *settings)
{
// select handler
I2C_HandleTypeDef* handler = get_handler(i2c);
if (NULL == handler)
{
return KB_ERROR;
}
enable_i2c_clk_(i2c);
// Init I2C Bus
handler->Init.ClockSpeed = settings->frequency;
handler->Init.DutyCycle = I2C_DUTYCYCLE_2;
handler->Init.OwnAddress1 = 0;
handler->Init.AddressingMode = I2C_ADDRESSINGMODE_7BIT;
handler->Init.DualAddressMode = I2C_DUALADDRESS_DISABLED;
handler->Init.OwnAddress2 = 0;
handler->Init.GeneralCallMode = I2C_GENERALCALL_DISABLED;
handler->Init.NoStretchMode = I2C_NOSTRETCH_DISABLED;
int8_t status = HAL_I2C_Init(handler);;
KB_CONVERT_STATUS(status);
if (status != KB_OK)
{
KB_DEBUG_ERROR("Error initializing.\r\n");
}
return status;
}
int i2c_sda_pin(i2c_t i2c, gpio_port_t port, gpio_pin_t pin, gpio_pull_t pull)
{
uint32_t alternate = GPIO_I2C_SDA_AF_(i2c, port, pin);
if (alternate == KB_WRONG_PIN)
{
KB_DEBUG_ERROR("Wrong SDA pin! Find a correct one.\r\n");
return KB_ERROR;
}
gpio_enable_clk(port);
// Init GPIOs
gpio_init_t gpio_setting = {
.Mode = GPIO_MODE_AF_OD,
.Pull = pull,
.Alternate = alternate,
.Speed = GPIO_SPEED_HIGH // 50MHz
};
gpio_init(port, pin, &gpio_setting);
return KB_OK;
}
int i2c_scl_pin(i2c_t i2c, gpio_port_t port, gpio_pin_t pin, gpio_pull_t pull)
{
uint32_t alternate = GPIO_I2C_SCL_AF_(i2c, port, pin);
if (alternate == KB_WRONG_PIN)
{
KB_DEBUG_ERROR("Wrong SCL pin! Find a correct one.\r\n");
return KB_ERROR;
}
gpio_enable_clk(port);
// Init GPIOs
gpio_init_t gpio_setting = {
.Mode = GPIO_MODE_AF_OD,
.Pull = pull,
.Alternate = alternate,
.Speed = GPIO_SPEED_HIGH // 50MHz
};
gpio_init(port, pin, &gpio_setting);
return KB_OK;
}
inline int i2c_send(i2c_t i2c, uint16_t address_target, uint8_t* buf, uint16_t size)
{
return i2c_send_timeout(i2c, address_target, buf, size, TIMEOUT_MAX);
}
int i2c_send_timeout(i2c_t i2c, uint16_t address_target, uint8_t* buf, uint16_t size, uint32_t timeout)
{
// select handler
I2C_HandleTypeDef* handler = get_handler(i2c);
if (NULL == handler) {
return KB_ERROR;
}
// target address is needed to be shit by 1
address_target <<= 1;
int8_t status = HAL_I2C_Master_Transmit(handler, address_target, buf, size, timeout);
KB_CONVERT_STATUS(status);
if (status != KB_OK)
{
KB_DEBUG_ERROR("Error in sending.\r\n");
}
return status;
}
int i2c_receive(i2c_t i2c, uint16_t address_target, uint8_t* buf, uint16_t size)
{
return i2c_receive_timeout(i2c, address_target, buf, size, TIMEOUT_MAX);
}
int i2c_receive_timeout(i2c_t i2c, uint16_t address_target, uint8_t* buf, uint16_t size, uint32_t timeout)
{
// select handler
I2C_HandleTypeDef* handler = get_handler(i2c);
if (NULL == handler) {
return KB_ERROR;
}
// target address is needed to be shit by 1
address_target <<= 1;
int8_t status = HAL_I2C_Master_Receive(handler, address_target, buf, size, timeout);
KB_CONVERT_STATUS(status);
if (status != KB_OK)
{
KB_DEBUG_ERROR("Error in sending.\r\n");
}
return status;
}
/******************************************************************************
* Private Functions
******************************************************************************/
static I2C_HandleTypeDef *get_handler (i2c_t i2c)
{
if (i2c == I2C1)
{
return &i2c_1_h_;
}
else if (i2c == I2C2)
{
return &i2c_2_h_;
}
else if (i2c == I2C3)
{
return &i2c_3_h_;
}
else
{
KB_DEBUG_ERROR("Wrong I2C device selected!\r\n");
return NULL;
}
}
static void enable_i2c_clk_ (i2c_t i2c)
{
if (i2c == I2C1)
{
__I2C1_CLK_ENABLE();
}
else if (i2c == I2C2)
{
__I2C2_CLK_ENABLE();
}
else if (i2c == I2C3)
{
__I2C3_CLK_ENABLE();
}
else
{
KB_DEBUG_ERROR("Wrong I2C device selected!\r\n");
}
return;
}
1fc1053c2This file is pinned to the selected release. Download the original to open it in your design tool.