Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
use <misumi-parts-library.scad>;
use <myLibs.scad>
thick= 4;
h= 50;
// the dimensions of the extrusion
extrusion_width= 20;
extrusion_height= 20;
bearingThickness= 7;
bearingOD= 22;
bearingID= 8;
bearingShaftCollar= 11.5;
wheel_width= bearingThickness;
wheel_indent= 2;
pillarht= 40;
pillardia= 20;
rotate([180,0,0])
idler_mount();
% translate([10,10,0]) rotate([0,0,-90]) corner();
module corner() {
translate([10,0,10]) hfs2020(80);
translate([0,-10,10]) rotate([0,0,90]) hfs2020(80);
translate([10,-10,0]) rotate([90,0,0]) hfs2020(80);
}
module corner_bracket() {
difference() {
translate([-thick,-thick,0]) union() {
cube([20+thick,thick,h]);
cube([thick,20+thick,h]);
}
translate([10,-thick-1,h/2]) rotate([0,90,90]) hole(5, thick+2);
translate([10,-thick-1,h/4]) rotate([0,90,90]) hole(5, thick+2);
translate([10,-thick-1,h-(h/4)]) rotate([0,90,90]) hole(5, thick+2);
translate([-thick-1,10,h/2]) rotate([0,90,0]) hole(5, thick+2);
translate([-thick-1,10,h/4]) rotate([0,90,0]) hole(5, thick+2);
translate([-thick-1,10,h-h/4]) rotate([0,90,0]) hole(5, thick+2);
}
}
module wheel_pillar(){
ht= pillarht-bearingThickness+wheel_indent-bearingThickness/2-thick-5;
translate([0,0,ht/2]) union() {
cylinder(r1=pillardia/2, r2=16/2, h=ht, center=true);
translate([0,0,ht/2-0.05]) cylinder(r=bearingID/2, h=bearingThickness+wheel_indent, $fn=64);
translate([0,0,ht/2-0.05]) cylinder(r1=16/2, r2= bearingShaftCollar/2, h=wheel_indent);
}
}
module idler_mount() {
union() {
translate([-10,-10,-thick]) corner_bracket();
translate([-10.1,-10.1,-thick]) cube([20.1,20.1,thick]);
translate([0,0,-thick+0.1]) rotate([180,0,0]) wheel_pillar();
}
}1923b690aThis file is pinned to the selected release. Download the original to open it in your design tool.