Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/*
* File: main.c
* Author: shawn
*
* Created on February 10, 2018, 10:39 PM
*/
#include <xc.h>
#include <p24FJ256GA702.h>
#include "spi.h"
#include "lcd.h"
#include "encoder.h"
#include "timer.h"
#include "dma.h"
//FWDT
#pragma config FWDTEN = OFF // Watchdog Timer Enable bits (WDT and SWDTEN disabled)
// FOSC
#pragma config FNOSC = FRCPLL // Oscillator Source Selection (Internal Fast RC (FRC))
#pragma config PLLMODE = PLL6X // PLL Mode Selection (4x PLL selected)
#pragma config IESO = OFF // Two-speed Oscillator Start-up Enable bit (Start up with user-selected oscillator source)
#pragma config POSCMD = NONE // Primary Oscillator Mode Select bits (Primary Oscillator disabled)
#pragma config OSCIOFCN = ON // OSC2 Pin Function bit (OSC2 is I/O)
#pragma config SOSCSEL = OFF // SOSC Power Selection Configuration bits (Digital (SCLKI) mode)
#pragma config PLLSS = PLL_FRC // PLL Secondary Selection Configuration bit (PLL is fed by the on-chip Fast RC (FRC) oscillator)
#pragma config IOL1WAY = ON // Peripheral pin select configuration bit (Allow only one reconfiguration)
#pragma config FCKSM = CSDCMD // Clock Switching Mode bits (Both Clock switching and Fail-safe Clock Monitor are disabled
int Sig_A = 0; //Signal from encoder pinA
int Sig_B = 0;
int encoder_read = 0; //Flag is set when encoder is polled
// 10 bit DAC
const int sine_wave[256] = {128, 131, 134, 137, 140, 143, 146,
149, 152, 155, 158, 162, 165, 167, 170, 173, 176,
179, 182, 185, 188, 190, 193, 196, 198, 201, 203,
206, 208, 211, 213, 215, 218, 220, 222, 224, 226,
228, 230, 232, 234, 235, 237, 238, 240, 241, 243,
244, 245, 246, 248, 249, 250, 250, 251, 252, 253,
253, 254, 254, 254, 255, 255, 255, 255, 255, 255,
255, 254, 254, 254, 253, 253, 252, 251, 250, 250,
249, 248, 246, 245, 244, 243, 241, 240, 238, 237,
235, 234, 232, 230, 228, 226, 224, 222, 220, 218,
215, 213, 211, 208, 206, 203, 201, 198, 196, 193,
190, 188, 185, 182, 179, 176, 173, 170, 167, 165,
162, 158, 155, 152, 149, 146, 143, 140, 137, 134,
131, 128, 124, 121, 118, 115, 112, 109, 106, 103,
100, 97, 93, 90, 88, 85, 82, 79, 76, 73, 70, 67, 65, 62, 59, 57, 54, 52, 49,
47, 44, 42, 40, 37, 35, 33, 31, 29, 27, 25, 23, 21, 20, 18, 17, 15, 14, 12, 11,
10, 9, 7, 6, 5, 5, 4, 3, 2, 2, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 2, 2, 3, 4, 5, 5, 6, 7, 9, 10, 11, 12, 14, 15, 17, 18, 20,
21, 23, 25, 27, 29, 31, 33, 35, 37, 40, 42, 44, 47, 49, 52, 54, 57, 59, 62, 65,
67, 70, 73, 76, 79, 82, 85, 88, 90, 93, 97, 100, 103, 106, 109, 112,
115, 118, 121, 124};
const int square_wave[3] = {0,255,0};
const int triangle_wave[512] = {0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22,
24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62,
64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 84, 86, 88, 90, 92, 94, 96, 98, 100,
102, 104, 106, 108, 110, 112, 114, 116, 118, 120,
122, 124, 126, 128, 130, 132, 134, 136, 138, 140,
142, 144, 146, 148, 150, 152, 154, 156, 158, 160,
162, 164, 166, 168, 170, 172, 174, 176, 178, 180,
182, 184, 186, 188, 190, 192, 194, 196, 198, 200,
202, 204, 206, 208, 210, 212, 214, 216, 218, 220,
222, 224, 226, 228, 230, 232, 234, 236, 238, 240,
242, 244, 246, 248, 250, 252, 254, 254, 252, 250,
248, 246, 244, 242, 240, 238, 236, 234, 232, 230,
228, 226, 224, 222, 220, 218, 216, 214, 212, 210,
208, 206, 204, 202, 200, 198, 196, 194, 192, 190,
188, 186, 184, 182, 180, 178, 176, 174, 172, 170,
168, 166, 164, 162, 160, 158, 156, 154, 152, 150,
148, 146, 144, 142, 140, 138, 136, 134, 132, 130,
128, 126, 124, 122, 120, 118, 116, 114, 112, 110,
108, 106, 104, 102, 100, 98, 96, 94, 92, 90, 88, 86, 84, 82, 80,
78, 76, 74, 72, 70, 68, 66, 64, 62, 60, 58, 56, 54, 52, 50, 48, 46, 44, 42, 40,
38, 36, 34, 32, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0};
const int sawtooth_wave[256] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,
52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71,
72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91,
92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105,
106, 107, 108, 109, 110, 111, 112, 113, 114, 115,
116, 117, 118, 119, 120, 121, 122, 123, 124, 125,
126, 127, 128, 129, 130, 131, 132, 133, 134, 135,
136, 137, 138, 139, 140, 141, 142, 143, 144, 145,
146, 147, 148, 149, 150, 151, 152, 153, 154, 155,
156, 157, 158, 159, 160, 161, 162, 163, 164, 165,
166, 167, 168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183, 184, 185,
186, 187, 188, 189, 190, 191, 192, 193, 194, 195,
196, 197, 198, 199, 200, 201, 202, 203, 204, 205,
206, 207, 208, 209, 210, 211, 212, 213, 214, 215,
216, 217, 218, 219, 220, 221, 222, 223, 224, 225,
226, 227, 228, 229, 230, 231, 232, 233, 234, 235,
236, 237, 238, 239, 240, 241, 242, 243, 244, 245,
246, 247, 248, 249, 250, 251, 252, 253, 254, 255};
int main(void) {
spi1_init();
encoder_init();
timer1_init(); //used to poll encoder
timer2_init(); //Used for delays
lcd_init();
dma_init();
TRISB = 0x00; //Sets PORTB as output
//Variable Initializations
int old_val = 0; //Previous value of encoder signals
long int counter = 1;
long int val = 0; //Stores waveform values (bits15 ..bits8, 0,0,0,0,0,0,0,0)
lcd_MsgWrite("Hello",1,5);
lcd_MsgWrite("This works :D",2,4);
while (1) {
// LATB = ((PORTB<<8)>>8) | sine_wave[val]<<8;
val = val + counter;
if(counter >= 16){
counter = 16;
}
if(val >= 255){
val = 0;
}
if (encoder_read) {
IEC0bits.T1IE = 0; //Disable Timer1 interrupts
encoder_dir(Sig_A, Sig_B, &old_val, &counter);
IEC0bits.T1IE = 1; //Enable Timer1 interrupts
encoder_read = 0; //resets encoder read flag
}
}
}
void __attribute__((interrupt(auto_psv))) _T1Interrupt(void) {
Sig_A = PORTAbits.RA0; //Reads input every 10 ms
Sig_B = PORTAbits.RA1;
encoder_read = 1; //sets encoder read flag
IFS0bits.T1IF = 0; //Resets timer1 interrupt flag
}
void __attribute__((interrupt(auto_psv))) _T2Interrupt(void) {
IFS0bits.T2IF = 0; //Resets timer2 interrupt flag
}
void __attribute__((interrupt(auto_psv))) _DMA1Interrupt(void) {
DMACH1bits.CHREQ = 1; //Set to 1 to initiate software trigger
IFS0bits.DMA1IF = 0; //Clear the DMA1 interrupt status flag
}
66475780aThis file is pinned to the selected release. Download the original to open it in your design tool.