Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
[mcu display]
#serial: **PASTE YOUR SERIAL PORT HERE AND UNCOMMENT**
restart_method: command
[display]
lcd_type: sh1106
i2c_mcu: display
i2c_bus: i2c1a
# Set the direction of the encoder wheel
# Standard: Right (clockwise) scrolls down or increases values. Left (counter-clockwise scrolls up or decreases values.
encoder_pins: ^display:PA3, ^display:PA4
# Reversed: Right (clockwise) scrolls up or decreases values. Left (counter-clockwise scrolls down or increases values.
#encoder_pins: ^display:PA4, ^display:PA3
click_pin: ^!display:PA1
kill_pin: ^!display:PA5
#x_offset: 2
# Use X offset to shift the display towards the right. Value can be 0 to 3
#vcomh: 0
# Set the Vcomh value on SSD1306/SH1106 displays. This value is
# associated with a "smearing" effect on some OLED displays. The
# value may range from 0 to 63. Default is 0.
# Adjust this value if you get some vertical stripes on your display. (31 seems to be a good value)
[neopixel displayStatus]
pin: display:PA0
chain_count: 1
color_order: GRB
initial_RED: 0.2
initial_GREEN: 0.05
initial_BLUE: 0
9e1b4e7c1This file is pinned to the selected release. Download the original to open it in your design tool.