Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
// Riskable's Cherry MX void/cutout module for making keyboard (top) plates and key switch testers
$fn = 32;
use <utils.scad> // Because it's nice to have rounded corners on these sorts of things
// AUTHOR: Riskable <riskable@youknowwhat.com>
// VERSION: 1.1 (Changelog is at the bottom)
// LICENSE: Creative Commons - Attribution - Non-Commercial (if you want to use it in a commercial setting/product just ask!)
// NOTES
/*
* Feel free to use this .scad in your own projects to add proper Cherry MX-styled switch cutouts to keyboards, perhipherals, testers, or whatever you like.
* You can just copy cherry_switch_void() into your own code if you like--it's entirely self-contained and reasonably small. Just make sure to credit it, "// This module was written by Riskable:" or something like that =)
* Actual Cherry MX Measurements:
* Length/Width outside dimentions: 15.5mm x 13.95mm
* Length/Width under the overhang (no "under" on one side though): 13.95mm x 13.95mm
* In essence, it only overhangs on two sides and the basic cherry "hole" would be 14x14mm
*/
/* Creates the shape of a (proper) Cherry MX switch hole.
height: The thickness, really. Doesn't impact PLATE_THICKNESS
x_extra: Extra (void) space on the X axis (e.g. to save some plastic). Doesn't change the top plate.
y_extra: Extra (void) space on the Y axis. Same thing as X.
tolerance: Extra room on all sides (0.1 default should be good for most printers)
plate_thickness: How thick the top plate will be. Typical Cherry MX plates are about 1.5mm thick.
*/
module cherry_switch_void(height=12, x_extra=0, y_extra=0, tolerance=0.1, plate_thickness=1.5, corner_radius=0.5) { // Cherry MX body is supposed to be 11.6mm
switch_width = 15.6;
switch_length = 14; // Slightly shorter because we're making an acurate profile (see below)
center_space = 3.5; // Space between the cutouts on the sides of the switch
sides_width = (5+center_space); // Taken from the Cherry MX developer PDF
// Make the basic switch shape:
cube(
[switch_length+tolerance, switch_length+tolerance, height],
center=true);
// Profile for the sides:
translate([0,sides_width/2,0])
cube([switch_width-tolerance, center_space+tolerance, height], center=true);
translate([0,-sides_width/2,0])
cube([switch_width-tolerance, center_space+tolerance, height], center=true);
// Fill out the rest with a solid cube so that there's a top plate + empty space beneath
translate([0,0,plate_thickness])
squarish_rpoly(
xy=[switch_width+x_extra, switch_width+y_extra],
h=height, r=corner_radius, center=true);
}
/*
CHANGELOG:
1.2: Now using utils.scad with squarish_rpoly() instead of roundedCube since it's better (it's faster *and* I wrote it myself =).
1.1: Now using roundedCube so the interior edges aren't so sharp.
1.0: Initial release
*/da2cfaad9This file is pinned to the selected release. Download the original to open it in your design tool.