Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
# ROS–Unity Demo Setup
This document is in two parts - part 1 covers the minimum requirements for a ROS–Unity integration. Part 2 sets up the Unity Robotics Demo package, which you will need if you're following the ROS–Unity Integration tutorials.
These instructions cover both ROS1 and ROS2. The symbols <img src="images/ros1_icon.png" alt="ros1" width="14" height="14"/> and <img src="images/ros2_icon.png" alt="ros2" width="23" height="14"/> indicate instructions for ROS1 and ROS2 users, respectively. If using ROS2, start with [ROS2 Environment](setup.md#-ros2-environment).
## <img src="images/ros1_icon.png" alt="ros1" width="28" height="28"/> ROS Environment
Follow these steps to use ROS (melodic or noetic):
1.
a) If you don't already have a ROS environment set up, we recommend using Docker. Navigate to `tutorials/ros_unity_integration` in your copy of this repo and run the following commands:
```bash
docker build -t melodic -f ros_docker/Dockerfile .
docker run -it --rm -p 10000:10000 melodic /bin/bash
```
This should build a docker image and start it.
b) (Alternative) If you're using your own ROS environment, download and copy the [ROS-TCP-Endpoint](https://github.com/Unity-Technologies/ROS-TCP-Endpoint) package into the `src` folder in your Catkin workspace. Then navigate to your Catkin workspace and run `catkin_make`, then `source devel/setup.bash`. Ensure there are no errors.
2. Open a new terminal, navigate to your Catkin workspace, and run:
```bash
source devel/setup.bash
roscore
```
Once ROS Core has started, it will print `started core service [/rosout]` to the terminal window.
3. In your previous terminal, run the following command, replacing the `<your IP address>` with your ROS machine's IP or hostname.
```bash
rosparam set ROS_IP <your IP address>
```
- If you're running ROS in a Docker container, you can just use `rosparam set ROS_IP 0.0.0.0`
- On Linux you can find out your IP address with the command `hostname -I`
- On MacOS you can find out your IP address with `ipconfig getifaddr en0`
6. (Optional) By default, the server_endpoint will listen on port 10000, but this is also controlled by a parameter. If you need to change it, you can run the command `rosparam set ROS_TCP_PORT 10000`, replacing 10000 with the desired port number.
7. Start the server endpoint with the following command:
```bash
rosrun ros_tcp_endpoint default_server_endpoint.py
```
Once the server_endpoint has started, it will print something similar to `[INFO] [1603488341.950794]: Starting server on 192.168.50.149:10000`.
> Note, for this tutorial we have illustrated how to do everything manually, but for day-to-day use, we recommend starting the endpoint with a launch file. Replace all the above (including the roscore step) with the following command: `roslaunch ros_tcp_endpoint endpoint.launch`.
> While using this launch file, your ROS_IP and ROS_TCP_PORT parameters are read from the file src/ros_tcp_endpoint/config/params.yaml. You can edit this file to adjust your settings - for example, this command will set the appropriate IP address for your machine:
> `echo "ROS_IP: $(hostname -i)" > src/ros-tcp-endpoint/config/params.yaml`
> Read more about rosparam YAML options [here](http://wiki.ros.org/rosparam).
>
> Read more about the ROS Parameter Server [here](http://wiki.ros.org/Parameter%20Server).
## <img src="images/ros2_icon.png" alt="ros2" width="46" height="28"/> ROS2 Environment
Follow these steps if using ROS2:
1.
a) If you don't already have a ROS2 environment set up, we recommend using Docker. Navigate to `tutorials/ros_unity_integration` in your copy of this repo and run the following commands:
```bash
docker build -t foxy -f ros2_docker/Dockerfile .
docker run -it --rm -p 10000:10000 foxy /bin/bash
```
This should build a docker image and start it.
b) Alternatively, if you're not going to use the Docker image, download the [ROS2 branch of the ROS-TCP-Endpoint](https://github.com/Unity-Technologies/ROS-TCP-Endpoint/tree/ROS2) repository and copy it into the `src` folder in your Colcon workspace. Then navigate to your Colcon workspace and run the following commands:
```bash
source install/setup.bash
colcon build
source install/setup.bash
```
Note: yes, you need to run the source command twice. The first sets up the environment for the build to use, the second time adds the newly built packages to the environent.
2. In your Colcon workspace, run the following command, replacing `<your IP address>` with your ROS machine's IP or hostname.
```bash
ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=<your IP address>
```
- If you're running ROS in a Docker container, 0.0.0.0 is a valid incoming address, so you can write `ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=0.0.0.0`
- On Linux you can find out your IP address with the command `hostname -I`
- On MacOS you can find out your IP address with `ipconfig getifaddr en0`
Once the server_endpoint has started, it will print something similar to `[INFO] [1603488341.950794]: Starting server on 192.168.50.149:10000`.
3. (Alternative) If you need the server to listen on a port that's different from the default 10000, here's the command line to also set the ROS_TCP_PORT parameter:
```bash
ros2 run ros_tcp_endpoint default_server_endpoint --ros-args -p ROS_IP:=127.0.0.1 -p ROS_TCP_PORT:=10000
```
## <img src="images/unity-tab-square-white.png" alt="ros2" width="24" height="24"/> Unity Setup
1. Launch Unity and create a new project. The Robotics package works best with a version of Unity no older than 2020.
2. Open Package Manager and click the + button at the top left corner. Select "add package from git URL" and enter "https://github.com/Unity-Technologies/ROS-TCP-Connector.git?path=/com.unity.robotics.ros-tcp-connector#dev" to install the [ROS-TCP-Connector](https://github.com/Unity-Technologies/ROS-TCP-Connector) package.
3. If you're not using a Docker container, open `Robotics/ROS Settings` from the Unity menu bar, and set the `ROS IP Address` variable to the IP you set earlier. (If you're using Docker, leave it as the default 127.0.0.1.)
4. <img src="images/ros2_icon.png" alt="ros2" width="23" height="14"/> Also in the ROS Settings window, ROS2 users should switch the protocol to ROS2 now.
## Install Unity Robotics Demo
The instructions so far have set up the ROS-TCP-Connector package for general use. If you are specifically following one of the [ROS–Unity Integration tutorials](README.md), you'll need to do the following additional steps:
1. Copy the `unity_robotics_demo` and `unity_robotics_demo_msgs` packages into the `src` folder in your Catkin workspace. (Skip this step if you're using one of the Dockerfiles from this repo: they have the demo packages pre-installed.)
- <img src="images/ros1_icon.png" alt="ros1" width="14" height="14"/> If using ROS1, copy them from from `tutorials/ros_unity_integration/ros_packages` in this repo.
- <img src="images/ros2_icon.png" alt="ros2" width="23" height="14"/> If using ROS2, copy them from `tutorials/ros_unity_integration/ros2_packages` in this repo.
1. Build the new packages.
- <img src="images/ros1_icon.png" alt="ros1" width="14" height="14"/> In ROS1: Run `catkin_make`, and then `source devel/setup.bash` (again) so that ROS can find the newly built messages.
- <img src="images/ros2_icon.png" alt="ros2" width="23" height="14"/> In ROS2: run `colcon build`, then `source install/setup.bash` (again) so that ROS can find the newly built messages.
2. In the Unity menu bar, go to `Robotics` -> `Generate ROS Messages...`. In the Message Browser window, click the Browse button at the top right to set the ROS message path to `tutorials/ros_unity_integration/ros_packages/unity_robotics_demo_msgs` in this repo.
(Note: The version in the ros2_packages folder is equivalent; ROS2 users can feel free to use it, or not.)
3. In the message browser, expand the unity_robotics_demo_msgs subfolder and click "Build 2 msgs" and "Build 2 srvs" to generate C# scripts from the ROS .msg and .srv files.
The generated files will be saved in the default directories `Assets/RosMessages/UnityRoboticsDemo/msg` and `Assets/RosMessages/UnityRoboticsDemo/srv`. Note, there is no difference between the message scripts generated in ROS1 and ROS2 mode. You don't need to regenerate messages when you switch between them.
4e7d66be1This file is pinned to the selected release. Download the original to open it in your design tool.