Loading files
515dcb91fThis file is pinned to the selected release. Download the original to open it in your design tool.
# Self-test routines for amyboard.
import amy, amyboard, tulip, midi
import struct, time
from ulab import numpy as np
def input_rms(blocks=10):
"""Read some of the current input and return its RMS."""
rmss = []
for _ in range(blocks):
waveform = np.array(
struct.unpack('<' + (512 * 'h'), tulip.amy_get_input_buffer())
)
rmss.append(np.sqrt(np.mean(waveform * waveform)))
return float(np.mean(rmss))
def self_test():
"""Run a series of hardware self-tests."""
# This assumes that loop-back cables have been inserted between in and out
# for line(audio), MIDI, CV1, CV2
all_pass = []
def passfail(condition):
"""Common code to test conditions."""
if condition:
all_pass.append(True)
return "PASS"
else:
all_pass.append(False)
return "**FAIL"
amy.reset()
# 1. Check that audio-in is small but not identically zero with no input.
time.sleep(0.5) # Need a little longer to let inputs not see startup chime.
rms = input_rms()
print("Quiescent input rms: %6.2f" % rms, " " * 8,
passfail(rms > 0.6 and rms < 2.0))
# 2. Check that audio-in is large when output is large
amy.send(osc=0, freq=440, vel=0.1)
time.sleep(0.1)
rms = input_rms()
print("Active input rms: %6.2f" % rms, " " * 8,
passfail(rms > 80.0 and rms < 120.0))
# 3. Check MIDI loopback
midi.config.reset()
global rx_midi
rx_midi = []
def trap_midi(m):
global rx_midi
rx_midi = [int(i) for i in m]
midi.add_callback(trap_midi)
time.sleep(0.1)
tulip.midi_out([0x90, 0x40, 0x7F])
time.sleep(0.1)
print("MIDI received: %-21s" % str([i for i in rx_midi]),
passfail(rx_midi == [0x90, 0x40, 0x7F]))
midi.remove_callback(trap_midi)
# 4. Test CV loopback
for channel in range(2):
amyboard.cv_out(volts=0.0, channel=channel)
time.sleep(0.1)
volts_bias = amyboard.cv_in(channel)
print("CV%d volts_bias %5.2f" % (channel, volts_bias),
" " * 15,
passfail(volts_bias > -1.5 and volts_bias < 1.5))
for volts in [-5, 5]:
amyboard.cv_out(volts=volts, channel=channel)
time.sleep(0.1)
volts_in = amyboard.cv_in(channel)
print("CV%d volts_out %4.1f volts_in %5.2f" % (channel, volts, volts_in),
" " * 2,
passfail(abs(volts_in - volts_bias - volts) < 0.2))
# Audible report
if all(all_pass):
# All OK chime
amy.send(osc=0, wave=amy.SINE, freq=1000,
bp0="0,1,500,0,0,0", vel=1)
time.sleep(0.5)
else:
# Fail buzz
for p in all_pass:
amy.send(osc=0, wave=amy.PULSE, freq=150 + 150 * p,
bp0="0,1,100,1,20,0,0,0", vel=1)
time.sleep(0.15)
# Tear down
amy.reset()
# If BOOT button is down, invoke self-test
from machine import Pin
def self_test_if_button():
# The BOOT button is connected to GPIO0
button = Pin(0, Pin.IN, Pin.PULL_UP)
if button.value() == 0: # Button pulls down
time.sleep(0.5)
self_test()
#self_test_if_button()