Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
bc853ff1bThis file is pinned to the selected release. Download the original to open it in your design tool.
# Step 2 : Server's PCB
This second step is for soldering everything onto the server's pcb.
1. Take the server's pcb
2. Take the 3 buttons and solder them
3. Take the potentiometer and solder it
4. Take the NRF24L01 and solder it
5. Take the Arduino Nano (solder the leads if needed) and solder it on the pcb
5. Take the 10uF capacitor and solder it (be careful, it's a polarized capacitor and therefore the positive side must match the little + on the pcb)
And you're done with the pcbs ! Now you should have all three pcbs :
