Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
92734918dThis file is pinned to the selected release. Download the original to open it in your design tool.
A perfboard/breadboard style PCB, to be used as a basis for any DIY module. Including a few common circuit features to speed up DIY'ing.
It's designed to connect to the rear of a module panel at 90 degrees, via the potentiometer and jack socket nuts.
- 16mm potentiometer footprints (cheapest type of potentiometer)
-- 90 degree potentiometer brackets to take the strain off the solder joints
- 3.5mm stereo jack socket footprints
- 10 pin Eurorack power connector
- 7085 voltage regulator
- voltage reference IC
- Arduino Nano footprint
The Arduino, voltage reference and power ICs are all connected via the PCB.
The PCB should also be useful for 100% analogue modules too.
**UPDATE 18th May**
- Uploaded Arduino board without 3V3 supply, with option to break out SCK and MOSI to the central rails
- Uploaded STM32 blue pill based board
- Created MIDI daughter board, fitting behind 2 jacks that can be screwed into a front panel
- Uploaded .zip files containing gerber and excellon files, that are ready for CAM
- All this is still **UNTESTED!**