Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/**
******************************************************************************
* @file usb_dcd_int.c
* @author MCD Application Team
* @version V2.2.0
* @date 09-November-2015
* @brief Peripheral Device interrupt subroutines
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usb_dcd_int.h"
/** @addtogroup USB_OTG_DRIVER
* @{
*/
/** @defgroup USB_DCD_INT
* @brief This file contains the interrupt subroutines for the Device mode.
* @{
*/
/** @defgroup USB_DCD_INT_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USB_DCD_INT_Private_FunctionPrototypes
* @{
*/
/* static functions */
static uint32_t DCD_ReadDevInEP (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum);
/* Interrupt Handlers */
static uint32_t DCD_HandleInEP_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleOutEP_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleSof_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleRxStatusQueueLevel_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_WriteEmptyTxFifo(USB_OTG_CORE_HANDLE *pdev , uint32_t epnum);
static uint32_t DCD_HandleUsbReset_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleEnumDone_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleResume_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_HandleUSBSuspend_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_IsoINIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_IsoOUTIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev);
#ifdef VBUS_SENSING_ENABLED
static uint32_t DCD_SessionRequest_ISR(USB_OTG_CORE_HANDLE *pdev);
static uint32_t DCD_OTG_ISR(USB_OTG_CORE_HANDLE *pdev);
#endif
/**
* @}
*/
/** @defgroup USB_DCD_INT_Private_Functions
* @{
*/
#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED
/**
* @brief USBD_OTG_EP1OUT_ISR_Handler
* handles all USB Interrupts
* @param pdev: device instance
* @retval status
*/
uint32_t USBD_OTG_EP1OUT_ISR_Handler (USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_DOEPINTn_TypeDef doepint;
USB_OTG_DEPXFRSIZ_TypeDef deptsiz;
doepint.d32 = USB_OTG_READ_REG32(&pdev->regs.OUTEP_REGS[1]->DOEPINT);
doepint.d32&= USB_OTG_READ_REG32(&pdev->regs.DREGS->DOUTEP1MSK);
/* Transfer complete */
if ( doepint.b.xfercompl )
{
/* Clear the bit in DOEPINTn for this interrupt */
CLEAR_OUT_EP_INTR(1, xfercompl);
if (pdev->cfg.dma_enable == 1)
{
deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[1]->DOEPTSIZ));
pdev->dev.out_ep[1].xfer_count = pdev->dev.out_ep[1].xfer_len- \
deptsiz.b.xfersize;
}
/* Inform upper layer: data ready */
/* RX COMPLETE */
USBD_DCD_INT_fops->DataOutStage(pdev , 1);
}
/* Endpoint disable */
if ( doepint.b.epdisabled )
{
/* Clear the bit in DOEPINTn for this interrupt */
CLEAR_OUT_EP_INTR(1, epdisabled);
}
return 1;
}
/**
* @brief USBD_OTG_EP1IN_ISR_Handler
* handles all USB Interrupts
* @param pdev: device instance
* @retval status
*/
uint32_t USBD_OTG_EP1IN_ISR_Handler (USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_DIEPINTn_TypeDef diepint;
uint32_t fifoemptymsk, msk, emp;
msk = USB_OTG_READ_REG32(&pdev->regs.DREGS->DINEP1MSK);
emp = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPEMPMSK);
msk |= ((emp >> 1 ) & 0x1) << 7;
diepint.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[1]->DIEPINT) & msk;
if ( diepint.b.xfercompl )
{
fifoemptymsk = 0x1 << 1;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0);
CLEAR_IN_EP_INTR(1, xfercompl);
/* TX COMPLETE */
USBD_DCD_INT_fops->DataInStage(pdev , 1);
}
if ( diepint.b.epdisabled )
{
CLEAR_IN_EP_INTR(1, epdisabled);
}
if ( diepint.b.timeout )
{
CLEAR_IN_EP_INTR(1, timeout);
}
if (diepint.b.intktxfemp)
{
CLEAR_IN_EP_INTR(1, intktxfemp);
}
if (diepint.b.inepnakeff)
{
CLEAR_IN_EP_INTR(1, inepnakeff);
}
if (diepint.b.emptyintr)
{
DCD_WriteEmptyTxFifo(pdev , 1);
}
return 1;
}
#endif
/**
* @brief STM32_USBF_OTG_ISR_Handler
* handles all USB Interrupts
* @param pdev: device instance
* @retval status
*/
uint32_t USBD_OTG_ISR_Handler (USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintr_status;
uint32_t retval = 0;
if (USB_OTG_IsDeviceMode(pdev)) /* ensure that we are in device mode */
{
gintr_status.d32 = USB_OTG_ReadCoreItr(pdev);
if (!gintr_status.d32) /* avoid spurious interrupt */
{
return 0;
}
if (gintr_status.b.outepintr)
{
retval |= DCD_HandleOutEP_ISR(pdev);
}
if (gintr_status.b.inepint)
{
retval |= DCD_HandleInEP_ISR(pdev);
}
if (gintr_status.b.modemismatch)
{
USB_OTG_GINTSTS_TypeDef gintsts;
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.modemismatch = 1;
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32);
}
if (gintr_status.b.wkupintr)
{
retval |= DCD_HandleResume_ISR(pdev);
}
if (gintr_status.b.usbsuspend)
{
retval |= DCD_HandleUSBSuspend_ISR(pdev);
}
if (gintr_status.b.sofintr)
{
retval |= DCD_HandleSof_ISR(pdev);
}
if (gintr_status.b.rxstsqlvl)
{
retval |= DCD_HandleRxStatusQueueLevel_ISR(pdev);
}
if (gintr_status.b.usbreset)
{
retval |= DCD_HandleUsbReset_ISR(pdev);
}
if (gintr_status.b.enumdone)
{
retval |= DCD_HandleEnumDone_ISR(pdev);
}
if (gintr_status.b.incomplisoin)
{
retval |= DCD_IsoINIncomplete_ISR(pdev);
}
if (gintr_status.b.incomplisoout)
{
retval |= DCD_IsoOUTIncomplete_ISR(pdev);
}
#ifdef VBUS_SENSING_ENABLED
if (gintr_status.b.sessreqintr)
{
retval |= DCD_SessionRequest_ISR(pdev);
}
if (gintr_status.b.otgintr)
{
retval |= DCD_OTG_ISR(pdev);
}
#endif
}
return retval;
}
#ifdef VBUS_SENSING_ENABLED
/**
* @brief DCD_SessionRequest_ISR
* Indicates that the USB_OTG controller has detected a connection
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_SessionRequest_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintsts;
USBD_DCD_INT_fops->DevConnected (pdev);
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.sessreqintr = 1;
USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32);
return 1;
}
/**
* @brief DCD_OTG_ISR
* Indicates that the USB_OTG controller has detected an OTG event:
* used to detect the end of session i.e. disconnection
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_OTG_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GOTGINT_TypeDef gotgint;
gotgint.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GOTGINT);
if (gotgint.b.sesenddet)
{
USBD_DCD_INT_fops->DevDisconnected (pdev);
}
/* Clear OTG interrupt */
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GOTGINT, gotgint.d32);
return 1;
}
#endif
/**
* @brief DCD_HandleResume_ISR
* Indicates that the USB_OTG controller has detected a resume or
* remote Wake-up sequence
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleResume_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintsts;
USB_OTG_DCTL_TypeDef devctl;
USB_OTG_PCGCCTL_TypeDef power;
if(pdev->cfg.low_power)
{
/* un-gate USB Core clock */
power.d32 = USB_OTG_READ_REG32(pdev->regs.PCGCCTL);
power.b.gatehclk = 0;
power.b.stoppclk = 0;
USB_OTG_WRITE_REG32(pdev->regs.PCGCCTL, power.d32);
}
/* Clear the Remote Wake-up Signaling */
devctl.d32 = 0;
devctl.b.rmtwkupsig = 1;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, devctl.d32, 0);
/* Inform upper layer by the Resume Event */
USBD_DCD_INT_fops->Resume (pdev);
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.wkupintr = 1;
USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32);
return 1;
}
/**
* @brief USB_OTG_HandleUSBSuspend_ISR
* Indicates that SUSPEND state has been detected on the USB
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleUSBSuspend_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintsts;
USB_OTG_PCGCCTL_TypeDef power;
USB_OTG_DSTS_TypeDef dsts;
__IO uint8_t prev_status = 0;
prev_status = pdev->dev.device_status;
USBD_DCD_INT_fops->Suspend (pdev);
dsts.d32 = USB_OTG_READ_REG32(&pdev->regs.DREGS->DSTS);
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.usbsuspend = 1;
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32);
if((pdev->cfg.low_power) && (dsts.b.suspsts == 1) &&
(pdev->dev.connection_status == 1) &&
(prev_status == USB_OTG_CONFIGURED))
{
/* switch-off the clocks */
power.d32 = 0;
power.b.stoppclk = 1;
USB_OTG_MODIFY_REG32(pdev->regs.PCGCCTL, 0, power.d32);
power.b.gatehclk = 1;
USB_OTG_MODIFY_REG32(pdev->regs.PCGCCTL, 0, power.d32);
/* Request to enter Sleep mode after exit from current ISR */
SCB->SCR |= (SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk);
}
return 1;
}
/**
* @brief DCD_HandleInEP_ISR
* Indicates that an IN EP has a pending Interrupt
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleInEP_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_DIEPINTn_TypeDef diepint;
uint32_t ep_intr;
uint32_t epnum = 0;
uint32_t fifoemptymsk;
diepint.d32 = 0;
ep_intr = USB_OTG_ReadDevAllInEPItr(pdev);
while ( ep_intr )
{
if ((ep_intr & 0x1) == 0x01) /* In ITR */
{
diepint.d32 = DCD_ReadDevInEP(pdev , epnum); /* Get In ITR status */
if ( diepint.b.xfercompl )
{
fifoemptymsk = 0x1 << epnum;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK, fifoemptymsk, 0);
CLEAR_IN_EP_INTR(epnum, xfercompl);
/* TX COMPLETE */
USBD_DCD_INT_fops->DataInStage(pdev , epnum);
if (pdev->cfg.dma_enable == 1)
{
if((epnum == 0) && (pdev->dev.device_state == USB_OTG_EP0_STATUS_IN))
{
/* prepare to rx more setup packets */
USB_OTG_EP0_OutStart(pdev);
}
}
}
if ( diepint.b.timeout )
{
CLEAR_IN_EP_INTR(epnum, timeout);
}
if (diepint.b.intktxfemp)
{
CLEAR_IN_EP_INTR(epnum, intktxfemp);
}
if (diepint.b.inepnakeff)
{
CLEAR_IN_EP_INTR(epnum, inepnakeff);
}
if ( diepint.b.epdisabled )
{
CLEAR_IN_EP_INTR(epnum, epdisabled);
}
if (diepint.b.emptyintr)
{
DCD_WriteEmptyTxFifo(pdev , epnum);
}
}
epnum++;
ep_intr >>= 1;
}
return 1;
}
/**
* @brief DCD_HandleOutEP_ISR
* Indicates that an OUT EP has a pending Interrupt
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleOutEP_ISR(USB_OTG_CORE_HANDLE *pdev)
{
uint32_t ep_intr;
USB_OTG_DOEPINTn_TypeDef doepint;
USB_OTG_DEPXFRSIZ_TypeDef deptsiz;
uint32_t epnum = 0;
doepint.d32 = 0;
/* Read in the device interrupt bits */
ep_intr = USB_OTG_ReadDevAllOutEp_itr(pdev);
while ( ep_intr )
{
if (ep_intr&0x1)
{
doepint.d32 = USB_OTG_ReadDevOutEP_itr(pdev, epnum);
/* Transfer complete */
if ( doepint.b.xfercompl )
{
/* Clear the bit in DOEPINTn for this interrupt */
CLEAR_OUT_EP_INTR(epnum, xfercompl);
if (pdev->cfg.dma_enable == 1)
{
deptsiz.d32 = USB_OTG_READ_REG32(&(pdev->regs.OUTEP_REGS[epnum]->DOEPTSIZ));
/*ToDo : handle more than one single MPS size packet */
pdev->dev.out_ep[epnum].xfer_count = pdev->dev.out_ep[epnum].maxpacket - \
deptsiz.b.xfersize;
}
/* Inform upper layer: data ready */
/* RX COMPLETE */
USBD_DCD_INT_fops->DataOutStage(pdev , epnum);
if (pdev->cfg.dma_enable == 1)
{
if((epnum == 0) && (pdev->dev.device_state == USB_OTG_EP0_STATUS_OUT))
{
/* prepare to rx more setup packets */
USB_OTG_EP0_OutStart(pdev);
}
}
}
/* Endpoint disable */
if ( doepint.b.epdisabled )
{
/* Clear the bit in DOEPINTn for this interrupt */
CLEAR_OUT_EP_INTR(epnum, epdisabled);
}
/* Setup Phase Done (control EPs) */
if ( doepint.b.setup )
{
/* inform the upper layer that a setup packet is available */
/* SETUP COMPLETE */
USBD_DCD_INT_fops->SetupStage(pdev);
CLEAR_OUT_EP_INTR(epnum, setup);
}
}
epnum++;
ep_intr >>= 1;
}
return 1;
}
/**
* @brief DCD_HandleSof_ISR
* Handles the SOF Interrupts
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleSof_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef GINTSTS;
USBD_DCD_INT_fops->SOF(pdev);
/* Clear interrupt */
GINTSTS.d32 = 0;
GINTSTS.b.sofintr = 1;
USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, GINTSTS.d32);
return 1;
}
/**
* @brief DCD_HandleRxStatusQueueLevel_ISR
* Handles the Rx Status Queue Level Interrupt
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleRxStatusQueueLevel_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTMSK_TypeDef int_mask;
USB_OTG_DRXSTS_TypeDef status;
USB_OTG_EP *ep;
/* Disable the Rx Status Queue Level interrupt */
int_mask.d32 = 0;
int_mask.b.rxstsqlvl = 1;
USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, int_mask.d32, 0);
/* Get the Status from the top of the FIFO */
status.d32 = USB_OTG_READ_REG32( &pdev->regs.GREGS->GRXSTSP );
ep = &pdev->dev.out_ep[status.b.epnum];
switch (status.b.pktsts)
{
case STS_GOUT_NAK:
break;
case STS_DATA_UPDT:
if (status.b.bcnt)
{
USB_OTG_ReadPacket(pdev,ep->xfer_buff, status.b.bcnt);
ep->xfer_buff += status.b.bcnt;
ep->xfer_count += status.b.bcnt;
}
break;
case STS_XFER_COMP:
break;
case STS_SETUP_COMP:
break;
case STS_SETUP_UPDT:
/* Copy the setup packet received in FIFO into the setup buffer in RAM */
USB_OTG_ReadPacket(pdev , pdev->dev.setup_packet, 8);
ep->xfer_count += status.b.bcnt;
break;
default:
break;
}
/* Enable the Rx Status Queue Level interrupt */
USB_OTG_MODIFY_REG32( &pdev->regs.GREGS->GINTMSK, 0, int_mask.d32);
return 1;
}
/**
* @brief DCD_WriteEmptyTxFifo
* check FIFO for the next packet to be loaded
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_WriteEmptyTxFifo(USB_OTG_CORE_HANDLE *pdev, uint32_t epnum)
{
USB_OTG_DTXFSTSn_TypeDef txstatus;
USB_OTG_EP *ep;
uint32_t len = 0;
uint32_t len32b;
txstatus.d32 = 0;
uint32_t fifoemptymsk;
ep = &pdev->dev.in_ep[epnum];
len = ep->xfer_len - ep->xfer_count;
if (len > ep->maxpacket)
{
len = ep->maxpacket;
}
len32b = (len + 3) / 4;
txstatus.d32 = USB_OTG_READ_REG32( &pdev->regs.INEP_REGS[epnum]->DTXFSTS);
while (txstatus.b.txfspcavail > len32b &&
ep->xfer_count < ep->xfer_len &&
ep->xfer_len != 0)
{
/* Write the FIFO */
len = ep->xfer_len - ep->xfer_count;
if (len > ep->maxpacket)
{
len = ep->maxpacket;
}
len32b = (len + 3) / 4;
USB_OTG_WritePacket (pdev , ep->xfer_buff, epnum, len);
ep->xfer_buff += len;
ep->xfer_count += len;
txstatus.d32 = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[epnum]->DTXFSTS);
/* Mask the TxFIFOEmpty interrupt */
if (ep->xfer_len == ep->xfer_count)
{
fifoemptymsk = 0x1 << ep->num;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DIEPEMPMSK,
fifoemptymsk, 0);
}
}
return 1;
}
/**
* @brief DCD_HandleUsbReset_ISR
* This interrupt occurs when a USB Reset is detected
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleUsbReset_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_DAINT_TypeDef daintmsk;
USB_OTG_DOEPMSK_TypeDef doepmsk;
USB_OTG_DIEPMSK_TypeDef diepmsk;
USB_OTG_DCFG_TypeDef dcfg;
USB_OTG_DCTL_TypeDef dctl;
USB_OTG_GINTSTS_TypeDef gintsts;
uint32_t i;
dctl.d32 = 0;
daintmsk.d32 = 0;
doepmsk.d32 = 0;
diepmsk.d32 = 0;
dcfg.d32 = 0;
gintsts.d32 = 0;
/* Clear the Remote Wake-up Signaling */
dctl.b.rmtwkupsig = 1;
USB_OTG_MODIFY_REG32(&pdev->regs.DREGS->DCTL, dctl.d32, 0 );
/* Flush the Tx FIFO */
USB_OTG_FlushTxFifo(pdev , 0 );
for (i = 0; i < pdev->cfg.dev_endpoints ; i++)
{
USB_OTG_WRITE_REG32( &pdev->regs.INEP_REGS[i]->DIEPINT, 0xFF);
USB_OTG_WRITE_REG32( &pdev->regs.OUTEP_REGS[i]->DOEPINT, 0xFF);
}
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINT, 0xFFFFFFFF );
daintmsk.ep.in = 1;
daintmsk.ep.out = 1;
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DAINTMSK, daintmsk.d32 );
doepmsk.b.setup = 1;
doepmsk.b.xfercompl = 1;
doepmsk.b.epdisabled = 1;
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOEPMSK, doepmsk.d32 );
#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DOUTEP1MSK, doepmsk.d32 );
#endif
diepmsk.b.xfercompl = 1;
diepmsk.b.timeout = 1;
diepmsk.b.epdisabled = 1;
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DIEPMSK, diepmsk.d32 );
#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DINEP1MSK, diepmsk.d32 );
#endif
/* Reset Device Address */
dcfg.d32 = USB_OTG_READ_REG32( &pdev->regs.DREGS->DCFG);
dcfg.b.devaddr = 0;
USB_OTG_WRITE_REG32( &pdev->regs.DREGS->DCFG, dcfg.d32);
/* setup EP0 to receive SETUP packets */
USB_OTG_EP0_OutStart(pdev);
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.usbreset = 1;
USB_OTG_WRITE_REG32 (&pdev->regs.GREGS->GINTSTS, gintsts.d32);
/*Reset internal state machine */
USBD_DCD_INT_fops->Reset(pdev);
return 1;
}
/**
* @brief DCD_HandleEnumDone_ISR
* Read the device status register and set the device speed
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_HandleEnumDone_ISR(USB_OTG_CORE_HANDLE *pdev)
{
uint32_t hclk = 168000000;
USB_OTG_GINTSTS_TypeDef gintsts;
USB_OTG_GUSBCFG_TypeDef gusbcfg;
RCC_ClocksTypeDef RCC_Clocks;
USB_OTG_EP0Activate(pdev);
/* Get HCLK frequency */
RCC_GetClocksFreq(&RCC_Clocks);
hclk = RCC_Clocks.HCLK_Frequency;
/* Clear default TRDT value and Set USB turn-around time based on device speed and PHY interface. */
gusbcfg.d32 = USB_OTG_READ_REG32(&pdev->regs.GREGS->GUSBCFG);
gusbcfg.b.usbtrdtim = 0;
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GUSBCFG, gusbcfg.d32);
/* Full or High speed */
if ( USB_OTG_GetDeviceSpeed(pdev) == USB_SPEED_HIGH)
{
pdev->cfg.speed = USB_OTG_SPEED_HIGH;
pdev->cfg.mps = USB_OTG_HS_MAX_PACKET_SIZE ;
/*USBTRD min For HS device*/
gusbcfg.b.usbtrdtim = 9;
}
else
{
pdev->cfg.speed = USB_OTG_SPEED_FULL;
pdev->cfg.mps = USB_OTG_FS_MAX_PACKET_SIZE ;
/* The USBTRD is configured according to the tables below, depending on AHB frequency
used by application. In the low AHB frequency range it is used to stretch enough the USB response
time to IN tokens, the USB turnaround time, so to compensate for the longer AHB read access
latency to the Data FIFO */
if((hclk >= 15000000)&&(hclk < 16000000))
{
/* hclk Clock Range between 15-16 MHz */
gusbcfg.b.usbtrdtim = 0xE;
}
else if((hclk >= 16000000)&&(hclk < 17100000))
{
/* hclk Clock Range between 16-17.1 MHz */
gusbcfg.b.usbtrdtim = 0xD;
}
else if((hclk >= 17100000)&&(hclk < 18400000))
{
/* hclk Clock Range between 17-18.4 MHz */
gusbcfg.b.usbtrdtim = 0xC;
}
else if((hclk >= 18400000)&&(hclk < 20000000))
{
/* hclk Clock Range between 18.4-20 MHz */
gusbcfg.b.usbtrdtim = 0xB;
}
else if((hclk >= 20000000)&&(hclk < 21800000))
{
/* hclk Clock Range between 20-21.8 MHz */
gusbcfg.b.usbtrdtim = 0xA;
}
else if((hclk >= 21800000)&&(hclk < 24000000))
{
/* hclk Clock Range between 21.8-24 MHz */
gusbcfg.b.usbtrdtim = 0x9;
}
else if((hclk >= 24000000)&&(hclk < 26600000))
{
/* hclk Clock Range between 24-26.6 MHz */
gusbcfg.b.usbtrdtim = 0x8;
}
else if((hclk >= 26600000)&&(hclk < 30000000))
{
/* hclk Clock Range between 26.6-30 MHz */
gusbcfg.b.usbtrdtim = 0x7;
}
else if((hclk >= 30000000)&&(hclk < 34300000))
{
/* hclk Clock Range between 30-34.3 MHz */
gusbcfg.b.usbtrdtim= 0x6;
}
else /* if(hclk >= 34300000) */
{
/* hclk Clock Range between 34.3-168 MHz */
gusbcfg.b.usbtrdtim = 0x5;
}
}
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GUSBCFG, gusbcfg.d32);
/* Clear interrupt */
gintsts.d32 = 0;
gintsts.b.enumdone = 1;
USB_OTG_WRITE_REG32( &pdev->regs.GREGS->GINTSTS, gintsts.d32 );
return 1;
}
/**
* @brief DCD_IsoINIncomplete_ISR
* handle the ISO IN incomplete interrupt
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_IsoINIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintsts;
gintsts.d32 = 0;
USBD_DCD_INT_fops->IsoINIncomplete (pdev);
/* Clear interrupt */
gintsts.b.incomplisoin = 1;
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32);
return 1;
}
/**
* @brief DCD_IsoOUTIncomplete_ISR
* handle the ISO OUT incomplete interrupt
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_IsoOUTIncomplete_ISR(USB_OTG_CORE_HANDLE *pdev)
{
USB_OTG_GINTSTS_TypeDef gintsts;
gintsts.d32 = 0;
USBD_DCD_INT_fops->IsoOUTIncomplete (pdev);
/* Clear interrupt */
gintsts.b.incomplisoout = 1;
USB_OTG_WRITE_REG32(&pdev->regs.GREGS->GINTSTS, gintsts.d32);
return 1;
}
/**
* @brief DCD_ReadDevInEP
* Reads ep flags
* @param pdev: device instance
* @retval status
*/
static uint32_t DCD_ReadDevInEP (USB_OTG_CORE_HANDLE *pdev, uint8_t epnum)
{
uint32_t v, msk, emp;
msk = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPMSK);
emp = USB_OTG_READ_REG32(&pdev->regs.DREGS->DIEPEMPMSK);
msk |= ((emp >> epnum) & 0x1) << 7;
v = USB_OTG_READ_REG32(&pdev->regs.INEP_REGS[epnum]->DIEPINT) & msk;
return v;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
9590cb339This file is pinned to the selected release. Download the original to open it in your design tool.