stmbl

//using FB_TX

//TODO: ready pin

#define NUM_OF_SAMPLES_Y  800

HAL_COMP(yaskawa);

HAL_PIN(pos) = 0.0;
HAL_PIN(error) = 0.0;
HAL_PIN(dump) = 0;
HAL_PIN(len) = 16;
HAL_PIN(off) = 60;

MEM(volatile uint32_t rxbuf[NUM_OF_SAMPLES_Y + 1]);
MEM(volatile uint32_t txbuf[128]);
MEM(int pos) = 0;
MEM(char data[150]);
MEM(DMA_InitTypeDef DMA_InitStructurerx);

RT_INIT(
  GPIO_InitTypeDef GPIO_InitStruct;

  //TX enable
  GPIO_InitStruct.GPIO_Pin   = GPIO_Pin_12;
  GPIO_InitStruct.GPIO_Mode  = GPIO_Mode_OUT;
  GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStruct.GPIO_Speed = GPIO_Speed_25MHz;
  GPIO_InitStruct.GPIO_PuPd  = GPIO_PuPd_NOPULL;
  GPIO_Init(GPIOB, &GPIO_InitStruct);
  GPIO_ResetBits(GPIOB,GPIO_Pin_12);

  //TX
  GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10;
  GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
  GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
  GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL ;
  GPIO_Init(GPIOB, &GPIO_InitStruct);
  GPIO_PinAFConfig(GPIOB, GPIO_PinSource10, GPIO_AF_TIM2);

  //TIM2 is used to toggle tx pin
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_OutputNState = TIM_OutputNState_Disable;
  TIM_OCInitStructure.TIM_Pulse = 0;
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
  TIM_OCInitStructure.TIM_OCNPolarity = TIM_OCNPolarity_High;
  TIM_OCInitStructure.TIM_OCIdleState = TIM_OCIdleState_Set;
  TIM_OCInitStructure.TIM_OCNIdleState = TIM_OCIdleState_Reset;

  TIM_OC3Init(TIM2, &TIM_OCInitStructure);
  TIM_OC3PreloadConfig(TIM2, TIM_OCPreload_Enable);
  TIM_CtrlPWMOutputs(TIM2, ENABLE);

  //RX
  GPIO_InitStruct.GPIO_Pin = GPIO_Pin_11;
  GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN;
  GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIOB, &GPIO_InitStruct);

  //TIM8 triggers DMA to sample reply
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM8, ENABLE);
  TIM_TimeBaseStructure.TIM_ClockDivision = TIM_CKD_DIV1;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
  TIM_TimeBaseStructure.TIM_Period = 20; // 168 / (20 + 1) = 8MHz
  TIM_TimeBaseStructure.TIM_Prescaler = 0;
  TIM_TimeBaseStructure.TIM_RepetitionCounter = 0;
  TIM_TimeBaseInit(TIM8, &TIM_TimeBaseStructure);
  TIM_ARRPreloadConfig(TIM8,ENABLE);
  TIM_DMACmd(TIM8, TIM_DMA_Update, ENABLE);
  TIM_Cmd(TIM8, ENABLE);

  DMA_InitStructurerx.DMA_Channel = DMA_Channel_7; //TIM8 ch1
  DMA_InitStructurerx.DMA_PeripheralBaseAddr = (uint32_t)&GPIOB->IDR;
  DMA_InitStructurerx.DMA_Memory0BaseAddr = (uint32_t)&rxbuf;
  DMA_InitStructurerx.DMA_DIR = DMA_DIR_PeripheralToMemory;
  DMA_InitStructurerx.DMA_BufferSize = NUM_OF_SAMPLES_Y;
  DMA_InitStructurerx.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
  DMA_InitStructurerx.DMA_MemoryInc = DMA_MemoryInc_Enable;
  DMA_InitStructurerx.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
  DMA_InitStructurerx.DMA_MemoryDataSize = DMA_PeripheralDataSize_Word;
  DMA_InitStructurerx.DMA_Mode = DMA_Mode_Normal;
  DMA_InitStructurerx.DMA_Priority = DMA_Priority_High;
  DMA_InitStructurerx.DMA_FIFOMode = DMA_FIFOMode_Disable;
  DMA_InitStructurerx.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
  DMA_InitStructurerx.DMA_MemoryBurst = DMA_MemoryBurst_Single;
  DMA_InitStructurerx.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;

  //manchaster
  //0 -> 01
  //1 -> 10
  //SYNC                framing                         framing
  //0101010101010101010 01111110 111110 111110 111110 1 01111110;
  //010101... are to sync receiver
  //01111110 is hdlc start and end flag for framing
  //0 is appended after 5 ones => transmitted data is 0xffff
  //reply has the same format
  const char request[] = "0101010101010101010 01111110 111110 111110 111110 1 01111110";
  char request_m[sizeof(request)*2];
  uint32_t tim_a = TIM2->CCER;
  uint32_t tim_b = tim_a;
  tim_a &= ~(1<<9);//0
  tim_b |= (1<<9);//1

  //encode in manchaster
  int j = 0;
  for(int i = 0;request[i];i++){
     if(request[i] == '0'){
        request_m[j++] = '0';
        request_m[j++] = '1';
     }else if(request[i] == '1'){
        request_m[j++] = '1';
        request_m[j++] = '0';
     }
  }
  request_m[j] = '\0';

  //build txbuf for dma
  for(int i = 0;request_m[i];i++){
     if(request_m[i] == '0'){
        txbuf[pos++] = tim_a;
     }else if(request_m[i] == '1'){
        txbuf[pos++] = tim_b;
     }
  }
  txbuf[pos++] = tim_a;
  txbuf[pos++] = tim_a;
);

RT(
   // DMA2-Config
   DMA_Cmd(DMA2_Stream1, DISABLE);
   DMA_DeInit(DMA2_Stream1);
   DMA_InitStructure.DMA_Channel = DMA_Channel_7; //TIM8 ch1
   DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&TIM2->CCER;
   DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)&txbuf;
   DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
   DMA_InitStructure.DMA_BufferSize = pos;
   DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
   DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
   DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
   DMA_InitStructure.DMA_MemoryDataSize = DMA_PeripheralDataSize_Word;
   DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
   DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
   DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
   DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
   DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
   DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
   DMA_Init(DMA2_Stream1, &DMA_InitStructure);

   TIM8->ARR = 20; // 168 / (20 + 1) = 8MHz
   GPIOB->BSRRL = GPIO_Pin_12;//TX enable
   DMA_Cmd(DMA2_Stream1, DISABLE);
   DMA_ClearFlag(DMA2_Stream1, DMA_FLAG_TCIF1);
   DMA_Cmd(DMA2_Stream1, ENABLE);//transmit request

   while (!(DMA2->LISR & DMA_FLAG_TCIF1));//wait for request

   GPIOB->BSRRH = GPIO_Pin_12;//TX disable

   //DMA2-Config
   DMA_Cmd(DMA2_Stream1, DISABLE);
   DMA_DeInit(DMA2_Stream1);
   TIM8->ARR = 6; // 168 / (6 + 1) = 24MHz
   DMA_Init(DMA2_Stream1, &DMA_InitStructurerx);

   uint32_t error = 0;

      GPIOB->BSRRH = GPIO_Pin_3;//messpin
      //start DMA
      DMA_Cmd(DMA2_Stream1, DISABLE);
      DMA_ClearFlag(DMA2_Stream1, DMA_FLAG_TCIF1);
      DMA_Cmd(DMA2_Stream1, ENABLE);
      //wait for DMA transfer complete
      while (DMA_GetFlagStatus(DMA2_Stream1, DMA_FLAG_TCIF1) == RESET);
      GPIOB->BSRRL = GPIO_Pin_3;//messpin

      uint32_t current;
      uint32_t last = (rxbuf[0] & GPIO_Pin_11);
      uint32_t first_edge = 0;
      //find any edge
      for(int j = 1; j < 20; j++){
         current = (rxbuf[j] & GPIO_Pin_11);
         if(current != last){
            first_edge = j;
            break;
         }
         last = current;
      }

      last = (rxbuf[first_edge] & GPIO_Pin_11);
      //align edge
      for(int j = first_edge+3; j < 20; j+=3){
         current = (rxbuf[j] & GPIO_Pin_11);
         if(current == last && last != 0){
            first_edge = j;
            break;
         }
         last = current;
      }

      if(first_edge == 0 || first_edge == 19){
         error++;
      }

      first_edge %= 6;

      uint32_t bit = 0;// 2 manchaster bits = 1 bit
      uint32_t ones = 0;// received ones, needed for framing and unstuffing
      uint32_t j = 0;// unstuffing and start offset
      int pos_length = PIN(len);// position length
      int pos_offset = PIN(off);// position offset
      int decode_length = pos_length + pos_offset + 1;
      //decode manchaster and unstuff
      for(int i = j; i < (decode_length+j); i++){
         bit = 0;
         if(rxbuf[i*6+first_edge+1]&GPIO_Pin_11){
            bit += 2;
         }
         if(rxbuf[i*6+first_edge+4]&GPIO_Pin_11){
            bit += 1;
         }
         switch(bit){
            case 1://01 -> manchaster encoded 0
               if(ones == 5){// 0 after 5 ones => stuffed data
                  j++;
               }else{
                  data[i-j] = '0';
               }
               ones = 0;
               break;
            case 2://10 -> manchaster encoded 1
               if(ones == 5){// 1 after 5 ones => start of packet
                  j = ++i;
                  ones = 0;
               }else{
                  ones++;
                  data[i-j] = '1';
               }
               break;
            case 0://00 -> manchaster alignment error
            case 3://11 -> manchaster alignment error
            default://obsolete
               data[i-j] = 'X';
               error++;
               break;
         }
      }
      data[100] = 0; // terminate string

      uint32_t pos = 0;
      //extract position data
      for(int i = 0; i < pos_length; i++){
         pos += (data[i + pos_offset]=='1') << i;
      }

      if(error){
         PIN(error) = 1.0;
      }else{
         PIN(error) = 0.0;
         PIN(pos) = (float)pos / (float)(1<<pos_length) * M_PI * 2.0 - M_PI;
      }
);

NRT(
   if(RISING_EDGE(PIN(dump))){
      printf("%s\n",data);
   }
);

ENDCOMP;