Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
/****************************************************************************
* $Id:: LPC11xx.h 3635 2010-06-02 00:31:46Z usb00423 $
* Project: NXP LPC11xx software example
*
* Description:
* CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
* NXP LPC11xx Device Series
*
****************************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
****************************************************************************/
#ifndef __LPC11xx_H__
#define __LPC11xx_H__
#ifdef __cplusplus
extern "C" {
#endif
/** @addtogroup LPC11xx_Definitions LPC11xx Definitions
This file defines all structures and symbols for LPC11xx:
- Registers and bitfields
- peripheral base address
- peripheral ID
- PIO definitions
@{
*/
/******************************************************************************/
/* Processor and Core Peripherals */
/******************************************************************************/
/** @addtogroup LPC11xx_CMSIS LPC11xx CMSIS Definitions
Configuration of the Cortex-M0 Processor and Core Peripherals
@{
*/
/*
* ==========================================================================
* ---------- Interrupt Number Definition -----------------------------------
* ==========================================================================
*/
typedef enum IRQn
{
/****** Cortex-M0 Processor Exceptions Numbers ***************************************************/
NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
/****** LPC11xx Specific Interrupt Numbers *******************************************************/
WAKEUP0_IRQn = 0, /*!< All I/O pins can be used as wakeup source. */
WAKEUP1_IRQn = 1, /*!< There are 13 pins in total for LPC11xx */
WAKEUP2_IRQn = 2,
WAKEUP3_IRQn = 3,
WAKEUP4_IRQn = 4,
WAKEUP5_IRQn = 5,
WAKEUP6_IRQn = 6,
WAKEUP7_IRQn = 7,
WAKEUP8_IRQn = 8,
WAKEUP9_IRQn = 9,
WAKEUP10_IRQn = 10,
WAKEUP11_IRQn = 11,
WAKEUP12_IRQn = 12,
CAN_IRQn = 13, /*!< CAN Interrupt */
SSP1_IRQn = 14, /*!< SSP1 Interrupt */
I2C_IRQn = 15, /*!< I2C Interrupt */
TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */
TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */
TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */
TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */
SSP0_IRQn = 20, /*!< SSP0 Interrupt */
UART_IRQn = 21, /*!< UART Interrupt */
ADC_IRQn = 24, /*!< A/D Converter Interrupt */
WDT_IRQn = 25, /*!< Watchdog timer Interrupt */
BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */
EINT3_IRQn = 28, /*!< External Interrupt 3 Interrupt */
EINT2_IRQn = 29, /*!< External Interrupt 2 Interrupt */
EINT1_IRQn = 30, /*!< External Interrupt 1 Interrupt */
EINT0_IRQn = 31, /*!< External Interrupt 0 Interrupt */
} IRQn_Type;
/*
* ==========================================================================
* ----------- Processor and Core Peripheral Section ------------------------
* ==========================================================================
*/
/* Configuration of the Cortex-M3 Processor and Core Peripherals */
#define __MPU_PRESENT 0 /*!< MPU present or not */
#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
/*@}*/ /* end of group LPC11xx_CMSIS */
#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
#include "system_LPC11xx.h" /* System Header */
/******************************************************************************/
/* Device Specific Peripheral Registers structures */
/******************************************************************************/
#if defined ( __CC_ARM )
#pragma anon_unions
#endif
/*------------- System Control (SYSCON) --------------------------------------*/
/** @addtogroup LPC11xx_SYSCON LPC11xx System Control Block
@{
*/
typedef struct
{
__IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */
__IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */
__IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */
__IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/ ) */
uint32_t RESERVED0[4];
__IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */
__IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */
__IO uint32_t IRCCTRL; /*!< Offset: 0x028 IRC control (R/W) */
uint32_t RESERVED1[1];
__IO uint32_t SYSRESSTAT; /*!< Offset: 0x030 System reset status Register (R/ ) */
uint32_t RESERVED2[3];
__IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */
__IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */
uint32_t RESERVED3[10];
__IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */
__IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */
__IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */
uint32_t RESERVED4[1];
__IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */
uint32_t RESERVED5[4];
__IO uint32_t SSP0CLKDIV; /*!< Offset: 0x094 SSP0 clock divider (R/W) */
__IO uint32_t UARTCLKDIV; /*!< Offset: 0x098 UART clock divider (R/W) */
__IO uint32_t SSP1CLKDIV; /*!< Offset: 0x09C SSP1 clock divider (R/W) */
uint32_t RESERVED6[4];
__IO uint32_t SYSTICKCLKDIV; /*!< Offset: 0x0B0 SYSTICK clock divider (R/W) */
uint32_t RESERVED7[7];
__IO uint32_t WDTCLKSEL; /*!< Offset: 0x0D0 WDT clock source select (R/W) */
__IO uint32_t WDTCLKUEN; /*!< Offset: 0x0D4 WDT clock source update enable (R/W) */
__IO uint32_t WDTCLKDIV; /*!< Offset: 0x0D8 WDT clock divider (R/W) */
uint32_t RESERVED8[1];
__IO uint32_t CLKOUTCLKSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */
__IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */
__IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */
uint32_t RESERVED9[5];
__IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */
__IO uint32_t PIOPORCAP1; /*!< Offset: 0x104 POR captured PIO status 1 (R/ ) */
uint32_t RESERVED10[18];
__IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */
uint32_t RESERVED11[1];
__IO uint32_t SYSTCKCAL; /*!< Offset: 0x158 System tick counter calibration (R/W) */
uint32_t RESERVED12;
__IO uint32_t MAINREGVOUT0CFG; /*!< Offset: 0x160 Main Regulator Voltage 0 Configuration */
__IO uint32_t MAINREGVOUT1CFG; /*!< Offset: 0x164 Main Regulator Voltage 1 Configuration */
uint32_t RESERVED13[38];
__IO uint32_t STARTAPRP0; /*!< Offset: 0x200 Start logic edge control Register 0 (R/W) */
__IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */
__IO uint32_t STARTRSRP0CLR; /*!< Offset: 0x208 Start logic reset Register 0 ( /W) */
__IO uint32_t STARTSRP0; /*!< Offset: 0x20C Start logic status Register 0 (R/W) */
uint32_t RESERVED14[8];
__IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */
__IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */
__IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */
uint32_t RESERVED15[101];
__O uint32_t VOUTCFGPROT; /*!< Offset: 0x3D0 Voltage Output Configuration Protection Register (W) */
uint32_t RESERVED16[8];
__I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */
} LPC_SYSCON_TypeDef;
/*@}*/ /* end of group LPC11xx_SYSCON */
/*------------- Pin Connect Block (IOCON) --------------------------------*/
/** @addtogroup LPC11xx_IOCON LPC11xx I/O Configuration Block
@{
*/
typedef struct
{
__IO uint32_t PIO2_6; /*!< Offset: 0x000 I/O configuration for pin PIO2_6 (R/W) */
uint32_t RESERVED0[1];
__IO uint32_t PIO2_0; /*!< Offset: 0x008 I/O configuration for pin PIO2_0/DTR/SSEL1 (R/W) */
__IO uint32_t RESET_PIO0_0; /*!< Offset: 0x00C I/O configuration for pin RESET/PIO0_0 (R/W) */
__IO uint32_t PIO0_1; /*!< Offset: 0x010 I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2 (R/W) */
__IO uint32_t PIO1_8; /*!< Offset: 0x014 I/O configuration for pin PIO1_8/CT16B1_CAP0 (R/W) */
uint32_t RESERVED1[1];
__IO uint32_t PIO0_2; /*!< Offset: 0x01C I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 (R/W) */
__IO uint32_t PIO2_7; /*!< Offset: 0x020 I/O configuration for pin PIO2_7 (R/W) */
__IO uint32_t PIO2_8; /*!< Offset: 0x024 I/O configuration for pin PIO2_8 (R/W) */
__IO uint32_t PIO2_1; /*!< Offset: 0x028 I/O configuration for pin PIO2_1/nDSR/SCK1 (R/W) */
__IO uint32_t PIO0_3; /*!< Offset: 0x02C I/O configuration for pin PIO0_3 (R/W) */
__IO uint32_t PIO0_4; /*!< Offset: 0x030 I/O configuration for pin PIO0_4/SCL (R/W) */
__IO uint32_t PIO0_5; /*!< Offset: 0x034 I/O configuration for pin PIO0_5/SDA (R/W) */
__IO uint32_t PIO1_9; /*!< Offset: 0x038 I/O configuration for pin PIO1_9/CT16B1_MAT0 (R/W) */
__IO uint32_t PIO3_4; /*!< Offset: 0x03C I/O configuration for pin PIO3_4 (R/W) */
__IO uint32_t PIO2_4; /*!< Offset: 0x040 I/O configuration for pin PIO2_4 (R/W) */
__IO uint32_t PIO2_5; /*!< Offset: 0x044 I/O configuration for pin PIO2_5 (R/W) */
__IO uint32_t PIO3_5; /*!< Offset: 0x048 I/O configuration for pin PIO3_5 (R/W) */
__IO uint32_t PIO0_6; /*!< Offset: 0x04C I/O configuration for pin PIO0_6/SCK0 (R/W) */
__IO uint32_t PIO0_7; /*!< Offset: 0x050 I/O configuration for pin PIO0_7/nCTS (R/W) */
__IO uint32_t PIO2_9; /*!< Offset: 0x054 I/O configuration for pin PIO2_9 (R/W) */
__IO uint32_t PIO2_10; /*!< Offset: 0x058 I/O configuration for pin PIO2_10 (R/W) */
__IO uint32_t PIO2_2; /*!< Offset: 0x05C I/O configuration for pin PIO2_2/DCD/MISO1 (R/W) */
__IO uint32_t PIO0_8; /*!< Offset: 0x060 I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 (R/W) */
__IO uint32_t PIO0_9; /*!< Offset: 0x064 I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 (R/W) */
__IO uint32_t SWCLK_PIO0_10; /*!< Offset: 0x068 I/O configuration for pin SWCLK/PIO0_10/SCK0/CT16B0_MAT2 (R/W) */
__IO uint32_t PIO1_10; /*!< Offset: 0x06C I/O configuration for pin PIO1_10/AD6/CT16B1_MAT1 (R/W) */
__IO uint32_t PIO2_11; /*!< Offset: 0x070 I/O configuration for pin PIO2_11/SCK0 (R/W) */
__IO uint32_t R_PIO0_11; /*!< Offset: 0x074 I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 (R/W) */
__IO uint32_t R_PIO1_0; /*!< Offset: 0x078 I/O configuration for pin TMS/PIO1_0/AD1/CT32B1_CAP0 (R/W) */
__IO uint32_t R_PIO1_1; /*!< Offset: 0x07C I/O configuration for pin TDO/PIO1_1/AD2/CT32B1_MAT0 (R/W) */
__IO uint32_t R_PIO1_2; /*!< Offset: 0x080 I/O configuration for pin nTRST/PIO1_2/AD3/CT32B1_MAT1 (R/W) */
__IO uint32_t PIO3_0; /*!< Offset: 0x084 I/O configuration for pin PIO3_0/nDTR (R/W) */
__IO uint32_t PIO3_1; /*!< Offset: 0x088 I/O configuration for pin PIO3_1/nDSR (R/W) */
__IO uint32_t PIO2_3; /*!< Offset: 0x08C I/O configuration for pin PIO2_3/RI/MOSI1 (R/W) */
__IO uint32_t SWDIO_PIO1_3; /*!< Offset: 0x090 I/O configuration for pin SWDIO/PIO1_3/AD4/CT32B1_MAT2 (R/W) */
__IO uint32_t PIO1_4; /*!< Offset: 0x094 I/O configuration for pin PIO1_4/AD5/CT32B1_MAT3 (R/W) */
__IO uint32_t PIO1_11; /*!< Offset: 0x098 I/O configuration for pin PIO1_11/AD7 (R/W) */
__IO uint32_t PIO3_2; /*!< Offset: 0x09C I/O configuration for pin PIO3_2/nDCD (R/W) */
__IO uint32_t PIO1_5; /*!< Offset: 0x0A0 I/O configuration for pin PIO1_5/nRTS/CT32B0_CAP0 (R/W) */
__IO uint32_t PIO1_6; /*!< Offset: 0x0A4 I/O configuration for pin PIO1_6/RXD/CT32B0_MAT0 (R/W) */
__IO uint32_t PIO1_7; /*!< Offset: 0x0A8 I/O configuration for pin PIO1_7/TXD/CT32B0_MAT1 (R/W) */
__IO uint32_t PIO3_3; /*!< Offset: 0x0AC I/O configuration for pin PIO3_3/nRI (R/W) */
__IO uint32_t SCK_LOC; /*!< Offset: 0x0B0 SCK pin location select Register (R/W) */
__IO uint32_t DSR_LOC; /*!< Offset: 0x0B4 DSR pin location select Register (R/W) */
__IO uint32_t DCD_LOC; /*!< Offset: 0x0B8 DCD pin location select Register (R/W) */
__IO uint32_t RI_LOC; /*!< Offset: 0x0BC RI pin location Register (R/W) */
} LPC_IOCON_TypeDef;
/*@}*/ /* end of group LPC11xx_IOCON */
/*------------- Power Management Unit (PMU) --------------------------*/
/** @addtogroup LPC11xx_PMU LPC11xx Power Management Unit
@{
*/
typedef struct
{
__IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */
__IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */
__IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */
__IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */
__IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */
__IO uint32_t GPREG4; /*!< Offset: 0x014 General purpose Register 4 (R/W) */
} LPC_PMU_TypeDef;
/*@}*/ /* end of group LPC11xx_PMU */
/*------------- General Purpose Input/Output (GPIO) --------------------------*/
/** @addtogroup LPC11xx_GPIO LPC11xx General Purpose Input/Output
@{
*/
typedef struct
{
union {
__IO uint32_t MASKED_ACCESS[4096]; /*!< Offset: 0x0000 to 0x3FFC Port data Register for pins PIOn_0 to PIOn_11 (R/W) */
struct {
uint32_t RESERVED0[4095];
__IO uint32_t DATA; /*!< Offset: 0x3FFC Port data Register (R/W) */
};
};
uint32_t RESERVED1[4096];
__IO uint32_t DIR; /*!< Offset: 0x8000 Data direction Register (R/W) */
__IO uint32_t IS; /*!< Offset: 0x8004 Interrupt sense Register (R/W) */
__IO uint32_t IBE; /*!< Offset: 0x8008 Interrupt both edges Register (R/W) */
__IO uint32_t IEV; /*!< Offset: 0x800C Interrupt event Register (R/W) */
__IO uint32_t IE; /*!< Offset: 0x8010 Interrupt mask Register (R/W) */
__IO uint32_t RIS; /*!< Offset: 0x8014 Raw interrupt status Register (R/ ) */
__IO uint32_t MIS; /*!< Offset: 0x8018 Masked interrupt status Register (R/ ) */
__IO uint32_t IC; /*!< Offset: 0x801C Interrupt clear Register (R/W) */
} LPC_GPIO_TypeDef;
/*@}*/ /* end of group LPC11xx_GPIO */
/*------------- Timer (TMR) --------------------------------------------------*/
/** @addtogroup LPC11xx_TMR LPC11xx 16/32-bit Counter/Timer
@{
*/
typedef struct
{
__IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
__IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
__IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
__IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
__IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
__IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
__IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
__IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
__IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
__IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
__IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
__I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
uint32_t RESERVED1[3];
__IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */
uint32_t RESERVED2[12];
__IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */
__IO uint32_t PWMC; /*!< Offset: 0x074 PWM Control Register (R/W) */
} LPC_TMR_TypeDef;
/*@}*/ /* end of group LPC11xx_TMR */
/*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/
/** @addtogroup LPC11xx_UART LPC11xx Universal Asynchronous Receiver/Transmitter
@{
*/
typedef struct
{
union {
__I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */
__O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */
__IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */
};
union {
__IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */
__IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */
};
union {
__I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */
__O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */
};
__IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */
__IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */
__I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */
__I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */
__IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */
__IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */
uint32_t RESERVED0;
__IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */
uint32_t RESERVED1;
__IO uint32_t TER; /*!< Offset: 0x030 Transmit Enable Register (R/W) */
uint32_t RESERVED2[6];
__IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */
__IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */
__IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */
__I uint32_t FIFOLVL; /*!< Offset: 0x058 FIFO Level Register (R/ ) */
} LPC_UART_TypeDef;
/*@}*/ /* end of group LPC11xx_UART */
/*------------- Synchronous Serial Communication (SSP) -----------------------*/
/** @addtogroup LPC11xx_SSP LPC11xx Synchronous Serial Port
@{
*/
typedef struct
{
__IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */
__IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */
__IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */
__I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */
__IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */
__IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */
__IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */
__IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */
__IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */
} LPC_SSP_TypeDef;
/*@}*/ /* end of group LPC11xx_SSP */
/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
/** @addtogroup LPC11xx_I2C LPC11xx I2C-Bus Interface
@{
*/
typedef struct
{
__IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */
__I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */
__IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */
__IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */
__IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */
__IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */
__O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */
__IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */
__IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */
__IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */
__IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */
__I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */
__IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */
__IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */
__IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */
__IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */
} LPC_I2C_TypeDef;
/*@}*/ /* end of group LPC11xx_I2C */
/*------------- Watchdog Timer (WDT) -----------------------------------------*/
/** @addtogroup LPC11xx_WDT LPC11xx WatchDog Timer
@{
*/
typedef struct
{
__IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */
__IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */
__O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register ( /W) */
__I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R/ ) */
uint32_t RESERVED0;
__IO uint32_t WARNINT;
__IO uint32_t WINDOW;
} LPC_WDT_TypeDef;
/*@}*/ /* end of group LPC11xx_WDT */
/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
/** @addtogroup LPC11xx_ADC LPC11xx Analog-to-Digital Converter
@{
*/
typedef struct
{
__IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */
__IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */
uint32_t RESERVED0;
__IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */
__IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */
__I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */
} LPC_ADC_TypeDef;
/*@}*/ /* end of group LPC11xx_ADC */
/*------------- CAN Controller (CAN) ----------------------------*/
/** @addtogroup LPC11xx_CAN LPC11xx Controller Area Network(CAN)
@{
*/
typedef struct
{
__IO uint32_t CNTL; /* 0x000 */
__IO uint32_t STAT;
__IO uint32_t EC;
__IO uint32_t BT;
__IO uint32_t INT;
__IO uint32_t TEST;
__IO uint32_t BRPE;
uint32_t RESERVED0;
__IO uint32_t IF1_CMDREQ; /* 0x020 */
__IO uint32_t IF1_CMDMSK;
__IO uint32_t IF1_MSK1;
__IO uint32_t IF1_MSK2;
__IO uint32_t IF1_ARB1;
__IO uint32_t IF1_ARB2;
__IO uint32_t IF1_MCTRL;
__IO uint32_t IF1_DA1;
__IO uint32_t IF1_DA2;
__IO uint32_t IF1_DB1;
__IO uint32_t IF1_DB2;
uint32_t RESERVED1[13];
__IO uint32_t IF2_CMDREQ; /* 0x080 */
__IO uint32_t IF2_CMDMSK;
__IO uint32_t IF2_MSK1;
__IO uint32_t IF2_MSK2;
__IO uint32_t IF2_ARB1;
__IO uint32_t IF2_ARB2;
__IO uint32_t IF2_MCTRL;
__IO uint32_t IF2_DA1;
__IO uint32_t IF2_DA2;
__IO uint32_t IF2_DB1;
__IO uint32_t IF2_DB2;
uint32_t RESERVED2[21];
__I uint32_t TXREQ1; /* 0x100 */
__I uint32_t TXREQ2;
uint32_t RESERVED3[6];
__I uint32_t ND1; /* 0x120 */
__I uint32_t ND2;
uint32_t RESERVED4[6];
__I uint32_t IR1; /* 0x140 */
__I uint32_t IR2;
uint32_t RESERVED5[6];
__I uint32_t MSGV1; /* 0x160 */
__I uint32_t MSGV2;
uint32_t RESERVED6[6];
__IO uint32_t CLKDIV; /* 0x180 */
} LPC_CAN_TypeDef;
/*@}*/ /* end of group LPC11xx_CAN */
#if defined ( __CC_ARM )
#pragma no_anon_unions
#endif
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
/* Base addresses */
#define LPC_FLASH_BASE (0x00000000UL)
#define LPC_RAM_BASE (0x10000000UL)
#define LPC_APB0_BASE (0x40000000UL)
#define LPC_AHB_BASE (0x50000000UL)
/* APB0 peripherals */
#define LPC_I2C_BASE (LPC_APB0_BASE + 0x00000)
#define LPC_WDT_BASE (LPC_APB0_BASE + 0x04000)
#define LPC_UART_BASE (LPC_APB0_BASE + 0x08000)
#define LPC_CT16B0_BASE (LPC_APB0_BASE + 0x0C000)
#define LPC_CT16B1_BASE (LPC_APB0_BASE + 0x10000)
#define LPC_CT32B0_BASE (LPC_APB0_BASE + 0x14000)
#define LPC_CT32B1_BASE (LPC_APB0_BASE + 0x18000)
#define LPC_ADC_BASE (LPC_APB0_BASE + 0x1C000)
#define LPC_PMU_BASE (LPC_APB0_BASE + 0x38000)
#define LPC_SSP0_BASE (LPC_APB0_BASE + 0x40000)
#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000)
#define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000)
#define LPC_CAN_BASE (LPC_APB0_BASE + 0x50000)
#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x58000)
/* AHB peripherals */
#define LPC_GPIO_BASE (LPC_AHB_BASE + 0x00000)
#define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x00000)
#define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x10000)
#define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x20000)
#define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x30000)
/******************************************************************************/
/* Peripheral declaration */
/******************************************************************************/
#define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE )
#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
#define LPC_UART ((LPC_UART_TypeDef *) LPC_UART_BASE )
#define LPC_TMR16B0 ((LPC_TMR_TypeDef *) LPC_CT16B0_BASE)
#define LPC_TMR16B1 ((LPC_TMR_TypeDef *) LPC_CT16B1_BASE)
#define LPC_TMR32B0 ((LPC_TMR_TypeDef *) LPC_CT32B0_BASE)
#define LPC_TMR32B1 ((LPC_TMR_TypeDef *) LPC_CT32B1_BASE)
#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
#define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE )
#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
#define LPC_CAN ((LPC_CAN_TypeDef *) LPC_CAN_BASE )
#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
#define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE)
#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
#ifdef __cplusplus
}
#endif
#endif /* __LPC11xx_H__ */
15cd104dcThis file is pinned to the selected release. Download the original to open it in your design tool.