stack-chan

# Getting Started

## Prerequisites

* Host PC
    * Tested on Linux (Ubuntu 20.04)
* M5Stack Basic
* USB type-C cable
* [git](https://git-scm.com/)
* [Node.js](https://nodejs.org/en/)
    * Tested with v16.14.2

## Clone the repository

Clone this repository with the `--recursive` option.

```console
$ git clone --recursive https://github.com/meganetaaan/stack-chan.git
$ cd stack-chan/firmware
$ npm i
```

## Setting up ModdableSDK

On the host PC, install [ModdableSDK](https://github.com/Moddable-OpenSource/moddable) and
Install [ESP-IDF](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/get-started/index.html) on the host PC.
There are three ways to do this

- Using the CLI (recommended)
- Using a Docker image
- Set up manually

### Using xs-dev (recommended)

Stack-Chan has npm scripting of the setup procedure.
Run the following command in the `stack-chan/firmware` directory.

```console
$ npm run setup
$ npm run setup -- --device=esp32
```

The script internally uses [`xs-dev`](https://github.com/HipsterBrown/xs-dev) to automate the setup of ModdableSDK and ESP-IDF.

### Using Docker images

This repository provides a Dockerfile build environment.
You can build, write and debug firmware inside a Docker container.

Note: This has been tested on Linux (Ubuntu 20.04); it may not work properly on Windows (WSL) or MacOS.

#### From terminal

```console
$ ./build-container.sh
$ ./launch-container.sh

# Run inside container
$ npm install
```

#### From VSCode

This project includes DevContainer preference for VSCode.
You can open the project in a container with the following commands

* Open the command palette (ctrl+shift+p)
* Run `>Remote-Containers: Reopen in Container`

### Manual

Follow the instructions on the [official website (English)](https://github.com/Moddable-OpenSource/moddable/blob/public/documentation/Moddable%20SDK%20-%20Getting%20Started.md) to install ModdableSDK and ESP-IDF.
If you cannot setup CLI or Docker properly, please do this.

## Test the environment

You can test the environment with the `npm run doctor` command.
If the installation was successful, the version of Moddable SDK will be displayed as follows, and esp32 will be displayed in Supported target devices.

```console
$ npm run doctor

> stack-chan@0.2.1 doctor
> xs-dev doctor

xs-dev environment info:
  CLI Version                0.20.0                                                                
  OS                         Linux                                                                 
  Arch                       x64                                                                   
  NodeJS Version             v16.14.2 (/usr/local/bin/node)                                        
  Python Version             3.8.10 (/home/sskw/.espressif/python_env/idf4.4_py3.8_env/bin/python) 
  Moddable SDK Version       3.6.0 (/home/sskw/.local/share/moddable)                              
  Supported target devices   lin, esp32                                                            
  ESP32 IDF Directory        /home/sskw/.local/share/esp32/esp-idf                                 

If this is related to an error when using the CLI, please create an issue at "https://github.com/hipsterbrown/xs-dev/issues/new" with the above info.
```

## Next step

- [Build and Flash firmware](./flashing-firmware.md)