splitflap

name: Export Electronics (v2)

on:
  push:
  pull_request:

jobs:
  export-electronics-sensor-smd:
    name: Export Electronics (Sensor SMD)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies_v2.sh

# Sensor board:
      - name: Export PCB fabrication files [sensor_smd, single]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/sensor_smd/sensor_smd.kicad_pcb --assembly-schematic electronics/sensor_smd/sensor_smd.kicad_sch
          cp -r electronics/build/sensor_smd-jlc electronics/build/outputs/sensor_smd-jlc

      - name: Panelize sensor PCB
        run: |
          kikit panelize -p electronics/sensor_smd/kikit_panelize.json electronics/sensor_smd/sensor_smd.kicad_pcb electronics/build/panelized_sensor_smd.kicad_pcb

      - name: Export PCB fabrication files [sensor_smd, panelized]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_sensor_smd.kicad_pcb --assembly-schematic electronics/sensor_smd/sensor_smd.kicad_sch
          cp -r electronics/build/panelized_sensor_smd-jlc electronics/build/outputs/sensor_smd-panelized-jlc

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Exports [sensor_smd, single]
        uses: INTI-CMNB/KiBot@v2_k6_1_6_3
        with:
          config: electronics/sensor_smd/sensor_smd.kibot.yml
          dir: electronics/build/outputs
          schema: 'electronics/sensor_smd/sensor_smd.kicad_sch'
          board: 'electronics/sensor_smd/sensor_smd.kicad_pcb'

      - name: Exports [sensor_smd, panelized]
        uses: INTI-CMNB/KiBot@v2_k6_1_6_3
        with:
          config: electronics/sensor_smd/sensor_smd-panelized.kibot.yml
          dir: electronics/build/outputs
          schema: 'electronics/sensor_smd/sensor_smd.kicad_sch'
          board: 'electronics/build/panelized_sensor_smd.kicad_pcb'

      - name: Fix permissions
        # Need to chown files back to runner, as ownership gets set to root by the KiBot Actions
        run: |
          sudo chown runner:docker electronics/build/outputs/*
          sudo chown runner:docker electronics/build/*

      - name: Update 3D artifacts [sensor_smd, single]
        run: |
          mv electronics/build/outputs/sensor_smd-3D_top.png electronics/build/outputs/sensor_smd-front-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-front-3d.png
          mv electronics/build/outputs/sensor_smd-3D_bottom.png electronics/build/outputs/sensor_smd-back-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-back-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Update 3D artifacts [sensor_smd, panelized]
        run: |
          mv electronics/build/outputs/panelized_sensor_smd-3D_top.png electronics/build/outputs/panelized_sensor_smd-front-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/panelized_sensor_smd-front-3d.png
          mv electronics/build/outputs/panelized_sensor_smd-3D_bottom.png electronics/build/outputs/panelized_sensor_smd-back-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/panelized_sensor_smd-back-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Rasterise schematic [sensor_smd]
        run: |
         convert -density 96 electronics/build/outputs/sensor_smd-schematic.pdf -background white -alpha remove electronics/build/outputs/sensor_smd-schematic.png
          ./scripts/annotate_image.sh electronics/build/outputs/sensor_smd-schematic.png

      - name: Show artifacts
        if: always()
        run: |
          ls -lah electronics/build
          ls -lah electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v4
        if: always()
        with:
          name: electronics-v2
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-v2 --delete --acl public-read --cache-control max-age=0,no-cache