splitflap

{
    "layout": {
        "type": "grid",
        "rows": 3,
        "cols": 2,
        "space": "1.4mm",
        "baketext": false,
    },
    "tabs": {
        "type": "fixed",
        "width": "4mm",
        "vcount": 2,
    },
    "cuts": {
        "type": "mousebites",
        "drill": "0.6mm",
        "spacing": "1mm",
        "offset": "-0.1mm",
        // "prolong": "0.5mm"
    },
    "framing": {
        "type": "frame",
        "width": "5mm",
        "space": "1.4mm",
        "cuts": "h",
    },
    "text": {
        "type": "simple",
        "text": "To separate sensor PCBs,     1. snap off this top rail",
        "anchor": "mt",
        "voffset": "2.5mm",
        "hjustify": "center",
        "vjustify": "center",
        "width": "2mm",
        "height": "2mm",
    },
    "text2": {
        "type": "simple",
        "text": "2. then snap off this bottom rail",
        "anchor": "mb",
        "voffset": "-2.5mm",
        "hjustify": "center",
        "vjustify": "center",
        "width": "1.5mm",
        "height": "1.5mm",
        "thickness": "0.25mm",
    },
    "text3": {
        "type": "simple",
        "text": "3. and then this one",
        "anchor": "ml",
        "hoffset": "2.5mm",
        "hjustify": "center",
        "vjustify": "center",
        "orientation": "90deg",
        "width": "1.2mm",
        "height": "1.2mm",
        "thickness": "0.2mm",
    },
    "text4": {
        "type": "simple",
        "text": "4. and finally this one!",
        "anchor": "mr",
        "hoffset": "-2.5mm",
        "hjustify": "center",
        "vjustify": "center",
        "orientation": "-90deg",
        "width": "1mm",
        "height": "1mm",
        "thickness": "0.15mm",
    },
    "post": {
        "millradius": "0.7mm",
    },
    "source": {
        "type": "auto",
    },
}