splitflap

name: Export Electronics

on:
  push:
  pull_request:

jobs:
  export-electronics-classic:
    name: Export Electronics (Classic + Sensor)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

# Classic Controller board:
      - name: Export Classic Controller schematic
        run: |
          ./electronics/scripts/export_schematic.py electronics/splitflap.sch
          cp electronics/build/splitflap.pdf electronics/build/outputs/classic-schematic.pdf
          cp electronics/build/splitflap.png electronics/build/outputs/classic-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export Classic Controller PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/splitflap.kicad_pcb
          cp electronics/build/splitflap_merged.png electronics/build/outputs/classic-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/classic-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export Classic Controller PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/splitflap.kicad_pcb
          cp -r electronics/build/splitflap-jlc electronics/build/outputs/classic-jlc

      - name: Export Classic Controller PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/splitflap.kicad_pcb
          cp electronics/build/splitflap-pcb-packet.pdf electronics/build/outputs/classic-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Panelize Classic Controller PCB
        run: |
          kikit panelize -p electronics/scripts/config/kikit_panelize_classic.json electronics/splitflap.kicad_pcb electronics/build/panelized_splitflap.kicad_pcb

      - name: Export panelized Classic Controller PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/build/panelized_splitflap.kicad_pcb
          cp electronics/build/panelized_splitflap_merged.png electronics/build/outputs/classic-panelized-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/classic-panelized-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export panelized Classic Controller PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_splitflap.kicad_pcb
          cp -r electronics/build/panelized_splitflap-jlc electronics/build/outputs/classic-panelized-jlc

      - name: Export panelized Classic Controller PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/build/panelized_splitflap.kicad_pcb
          cp electronics/build/panelized_splitflap-pcb-packet.pdf electronics/build/outputs/classic-panelized-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

# Sensor board:
      - name: Export sensor schematic
        run: |
          ./electronics/scripts/export_schematic.py electronics/sensor/sensor.sch
          cp electronics/build/sensor.pdf electronics/build/outputs/sensor-schematic.pdf
          cp electronics/build/sensor.png electronics/build/outputs/sensor-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export sensor PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/sensor/sensor.kicad_pcb
          cp -r electronics/build/sensor-jlc electronics/build/outputs/sensor-jlc

      - name: Export sensor PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/sensor/sensor.kicad_pcb
          cp electronics/build/sensor-pcb-packet.pdf electronics/build/outputs/sensor-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Panelize sensor PCB
        run: |
          kikit panelize -p electronics/scripts/config/kikit_panelize_sensor.json electronics/sensor/sensor.kicad_pcb electronics/build/panelized_sensor.kicad_pcb

      - name: Export panelized sensor PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/build/panelized_sensor.kicad_pcb
          cp electronics/build/panelized_sensor_merged.png electronics/build/outputs/sensor-panelized-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/sensor-panelized-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export panelized sensor PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_sensor.kicad_pcb
          cp -r electronics/build/panelized_sensor-jlc electronics/build/outputs/sensor-panelized-jlc

      - name: Export panelized sensor PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/build/panelized_sensor.kicad_pcb
          cp electronics/build/panelized_sensor-pcb-packet.pdf electronics/build/outputs/sensor-panelized-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [classic + sensors]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/splitflap.kibot.yml
          dir: electronics/build
          schema: 'electronics/splitflap.sch'
          board: 'electronics/splitflap.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-classic
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-classic --delete --acl public-read --cache-control max-age=0,no-cache


  export-electronics-chainlink:
    name: Export Electronics (Chainlink Driver)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

# Chainlink Driver:
      - name: Export chainlinkDriver schematic
        run: |
          ./electronics/scripts/export_schematic.py electronics/chainlinkDriver/chainlinkDriver.sch
          cp electronics/build/chainlinkDriver.pdf electronics/build/outputs/chainlinkDriver-schematic.pdf
          cp electronics/build/chainlinkDriver.png electronics/build/outputs/chainlinkDriver-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Render chainlinkDriver PCB 3D
        run: |
          ./electronics/scripts/export_3d.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --width 2000 --height 800 transform z+ z+ z+ z+ z+ z+ z+ z+ mr rx+ rx+ ry- ry- rz-
          cp electronics/build/chainlinkDriver-3d.png electronics/build/outputs/chainlinkDriver-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export chainlinkDriver JLCPCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb --assembly-schematic electronics/chainlinkDriver/chainlinkDriver.sch --alt-fields LCSC_ALT_ULN2003A LCSC_ALT_SCREW_DIBO
          cp -r electronics/build/chainlinkDriver-jlc electronics/build/outputs

      - name: Export chainlinkDriver PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb
          cp electronics/build/chainlinkDriver-pcb-packet.pdf electronics/build/outputs/chainlinkDriver-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Export chainlinkDriver PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/chainlinkDriver/chainlinkDriver.kicad_pcb
          cp electronics/build/chainlinkDriver_merged.png electronics/build/outputs/chainlinkDriver-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriver-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [chainlinkDriver]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/chainlinkDriver/chainlinkDriver.kibot.yml
          dir: electronics/build
          schema: 'electronics/chainlinkDriver/chainlinkDriver.sch'
          board: 'electronics/chainlinkDriver/chainlinkDriver.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-chainlink
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink --delete --acl public-read --cache-control max-age=0,no-cache




  export-electronics-chainlink-tester:
    name: Export Electronics (Chainlink Driver Tester)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

# Chainlink Driver Tester:
      - name: Export schematic [chainlinkDriverTester]
        run: |
          ./electronics/scripts/export_schematic.py electronics/chainlinkDriverTester/chainlinkDriverTester.sch
          cp electronics/build/chainlinkDriverTester.pdf electronics/build/outputs/chainlinkDriverTester-schematic.pdf
          cp electronics/build/chainlinkDriverTester.png electronics/build/outputs/chainlinkDriverTester-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Render PCB 3D [chainlinkDriverTester]
        run: |
          ./electronics/scripts/export_3d.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ z+ mu mr mr rx+ rx+ ry- ry- rz-
          cp electronics/build/chainlinkDriverTester-3d.png electronics/build/outputs/chainlinkDriverTester-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export JLCPCB fabrication files [chainlinkDriverTester]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
          cp -r electronics/build/chainlinkDriverTester-jlc electronics/build/outputs

      - name: Export PCB overview PDF [chainlinkDriverTester]
        run: |
          ./electronics/scripts/generate_pdf.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
          cp electronics/build/chainlinkDriverTester-pcb-packet.pdf electronics/build/outputs/chainlinkDriverTester-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Export PCB SVG [chainlinkDriverTester]
        run: |
          ./electronics/scripts/generate_svg.py electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb
          cp electronics/build/chainlinkDriverTester_merged.png electronics/build/outputs/chainlinkDriverTester-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkDriverTester-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [chainlinkDriverTester]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/chainlinkDriverTester/chainlinkDriverTester.kibot.yml
          dir: electronics/build
          schema: 'electronics/chainlinkDriverTester/chainlinkDriverTester.sch'
          board: 'electronics/chainlinkDriverTester/chainlinkDriverTester.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-chainlink-tester
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-tester --delete --acl public-read --cache-control max-age=0,no-cache


  export-electronics-chainlink-base:
    name: Export Electronics (Chainlink Base)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

# Chainlink Base:
      - name: Export schematic [chainlinkBase]
        run: |
          ./electronics/scripts/export_schematic.py electronics/chainlinkBase/chainlinkBase.sch
          cp electronics/build/chainlinkBase.pdf electronics/build/outputs/chainlinkBase-schematic.pdf
          cp electronics/build/chainlinkBase-0.png electronics/build/outputs/chainlinkBase-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Render PCB 3D [chainlinkBase]
        run: |
          ./electronics/scripts/export_3d.py electronics/chainlinkBase/chainlinkBase.kicad_pcb --width 1000 --height 1500 transform z+ z+ mu rx+ rx+ ry- ry- rz-
          cp electronics/build/chainlinkBase-3d.png electronics/build/outputs/chainlinkBase-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export JLCPCB fabrication files [chainlinkBase]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
          cp -r electronics/build/chainlinkBase-jlc electronics/build/outputs

      - name: Export PCB overview PDF [chainlinkBase]
        run: |
          ./electronics/scripts/generate_pdf.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
          cp electronics/build/chainlinkBase-pcb-packet.pdf electronics/build/outputs/chainlinkBase-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Export PCB SVG [chainlinkBase]
        run: |
          ./electronics/scripts/generate_svg.py electronics/chainlinkBase/chainlinkBase.kicad_pcb
          cp electronics/build/chainlinkBase_merged.png electronics/build/outputs/chainlinkBase-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBase-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [chainlinkBase]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/chainlinkBase/chainlinkBase.kibot.yml
          dir: electronics/build
          schema: 'electronics/chainlinkBase/chainlinkBase.sch'
          board: 'electronics/chainlinkBase/chainlinkBase.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-chainlink-base
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-base --delete --acl public-read --cache-control max-age=0,no-cache


  export-electronics-chainlink-buddy-t-display:
    name: Export Electronics (Chainlink Buddy T-Display)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

      - name: Export schematic [chainlinkBuddyTDisplay]
        run: |
          ./electronics/scripts/export_schematic.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch
          cp electronics/build/chainlinkBuddyTDisplay.pdf electronics/build/outputs/chainlinkBuddyTDisplay-schematic.pdf
          cp electronics/build/chainlinkBuddyTDisplay.png electronics/build/outputs/chainlinkBuddyTDisplay-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Render PCB 3D [chainlinkBuddyTDisplay]
        run: |
          ./electronics/scripts/export_3d.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mr mr mr rx+ rx+ ry- ry- rz-
          cp electronics/build/chainlinkBuddyTDisplay-3d.png electronics/build/outputs/chainlinkBuddyTDisplay-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export JLCPCB fabrication files [chainlinkBuddyTDisplay]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
          cp -r electronics/build/chainlinkBuddyTDisplay-jlc electronics/build/outputs

      - name: Export PCB overview PDF [chainlinkBuddyTDisplay]
        run: |
          ./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
          cp electronics/build/chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Export PCB SVG [chainlinkBuddyTDisplay]
        run: |
          ./electronics/scripts/generate_svg.py electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb
          cp electronics/build/chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Panelize
        run: |
          kikit panelize -p electronics/chainlinkBuddyTDisplay/kikit_panelize.json electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb

      - name: Export panelized PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
          cp electronics/build/panelized_chainlinkBuddyTDisplay_merged.png electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export panelized PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
          cp -r electronics/build/panelized_chainlinkBuddyTDisplay-jlc electronics/build/outputs/chainlinkBuddyTDisplay-panelized-jlc

      - name: Export panelized PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyTDisplay.kicad_pcb
          cp electronics/build/panelized_chainlinkBuddyTDisplay-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyTDisplay-panelized-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [chainlinkBuddyTDisplay]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kibot.yml
          dir: electronics/build
          schema: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.sch'
          board: 'electronics/chainlinkBuddyTDisplay/chainlinkBuddyTDisplay.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-chainlink-buddy-t-display
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-t-display --delete --acl public-read --cache-control max-age=0,no-cache


  export-electronics-chainlink-buddy-breadboard:
    name: Export Electronics (Chainlink Buddy Breadboard)
    runs-on: ubuntu-20.04

    steps:
      - name: Checkout code
        uses: actions/checkout@v2

      - name: Set up outputs directory
        run: mkdir -p electronics/build/outputs

      - name: Install dependencies
        run: ./electronics/scripts/dependencies.sh

      - name: Export schematic [chainlinkBuddyBreadboard]
        run: |
          ./electronics/scripts/export_schematic.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch
          cp electronics/build/chainlinkBuddyBreadboard.pdf electronics/build/outputs/chainlinkBuddyBreadboard-schematic.pdf
          cp electronics/build/chainlinkBuddyBreadboard.png electronics/build/outputs/chainlinkBuddyBreadboard-schematic.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Render PCB 3D [chainlinkBuddyBreadboard]
        run: |
          ./electronics/scripts/export_3d.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb --width 1600 --height 1100 transform z+ z+ z+ z+ mu rx+ rx+ rx+ rx+ ry+ ry+ ry+ rz+ rz+
          cp electronics/build/chainlinkBuddyBreadboard-3d.png electronics/build/outputs/chainlinkBuddyBreadboard-3d.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-3d.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export JLCPCB fabrication files [chainlinkBuddyBreadboard]
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
          cp -r electronics/build/chainlinkBuddyBreadboard-jlc electronics/build/outputs

      - name: Export PCB overview PDF [chainlinkBuddyBreadboard]
        run: |
          ./electronics/scripts/generate_pdf.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
          cp electronics/build/chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      - name: Export PCB SVG [chainlinkBuddyBreadboard]
        run: |
          ./electronics/scripts/generate_svg.py electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb
          cp electronics/build/chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Panelize
        run: |
          kikit panelize -p electronics/chainlinkBuddyBreadboard/kikit_panelize.json electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb

      - name: Export panelized PCB SVG
        run: |
          ./electronics/scripts/generate_svg.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
          cp electronics/build/panelized_chainlinkBuddyBreadboard_merged.png electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png
          ./scripts/annotate_image.sh electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-raster.png
        env:
          PYTHONUNBUFFERED: 1

      - name: Export panelized PCB fabrication files
        run: |
          ./electronics/scripts/export_jlcpcb.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
          cp -r electronics/build/panelized_chainlinkBuddyBreadboard-jlc electronics/build/outputs/chainlinkBuddyBreadboard-panelized-jlc

      - name: Export panelized PCB overview PDF
        run: |
          ./electronics/scripts/generate_pdf.py electronics/build/panelized_chainlinkBuddyBreadboard.kicad_pcb
          cp electronics/build/panelized_chainlinkBuddyBreadboard-pcb-packet.pdf electronics/build/outputs/chainlinkBuddyBreadboard-panelized-pcb-packet.pdf
        env:
          PYTHONUNBUFFERED: 1

      # Note: These kibot scripts are run last because they mess with file permissions which breaks other scripts, not sure why
      - name: Export BOM [chainlinkBuddyBreadboard]
        uses: INTI-CMNB/KiBot@2ddbea3e681de09147cb1677890694857def32a8
        with:
          config: electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kibot.yml
          dir: electronics/build
          schema: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.sch'
          board: 'electronics/chainlinkBuddyBreadboard/chainlinkBuddyBreadboard.kicad_pcb'

      - name: Copy BOM outputs
        run: cp -r electronics/build/bom electronics/build/outputs

      - name: Archive artifacts
        uses: actions/upload-artifact@v2
        if: always()
        with:
          name: electronics-chainlink-buddy-breadboard
          path: |
            electronics/build

      - name: Configure AWS Credentials
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        uses: aws-actions/configure-aws-credentials@v1
        with:
          aws-access-key-id: ${{ secrets.AWS_ACCESS_KEY_ID }}
          aws-secret-access-key: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          aws-region: us-east-1

      - name: Sync artifacts to S3
        if: github.event_name == 'push' && github.repository_owner == 'scottbez1'
        run: |
          aws s3 sync electronics/build/outputs s3://splitflap-artifacts/${GITHUB_REF#refs/heads/}/electronics-chainlink-buddy-breadboard --delete --acl public-read --cache-control max-age=0,no-cache