Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
f200eb2edThis file is pinned to the selected release. Download the original to open it in your design tool.
/*
* serv_rf_ram.v : SRAM-based RF storage for SERV
*
* SPDX-FileCopyrightText: 2019 Olof Kindgren <olof@award-winning.me>
* SPDX-License-Identifier: ISC
*/
module serv_rf_ram
#(parameter width=0,
parameter csr_regs=4,
parameter depth=32*(32+csr_regs)/width)
(input wire i_clk,
input wire [$clog2(depth)-1:0] i_waddr,
input wire [width-1:0] i_wdata,
input wire i_wen,
input wire [$clog2(depth)-1:0] i_raddr,
input wire i_ren,
output wire [width-1:0] o_rdata);
reg [width-1:0] memory [0:depth-1];
reg [width-1:0] rdata ;
always @(posedge i_clk) begin
if (i_wen)
memory[i_waddr] <= i_wdata;
rdata <= i_ren ? memory[i_raddr] : {width{1'bx}};
end
/* Reads from reg x0 needs to return 0
Check that the part of the read address corresponding to the register
is zero and gate the output
width LSB of reg index $clog2(width)
2 4 1
4 3 2
8 2 3
16 1 4
32 0 5
*/
reg regzero;
always @(posedge i_clk)
regzero <= !(|i_raddr[$clog2(depth)-1:5-$clog2(width)]);
assign o_rdata = rdata & ~{width{regzero}};
`ifdef SERV_CLEAR_RAM
integer i;
initial
for (i=0;i<depth;i=i+1)
memory[i] = {width{1'd0}};
`endif
endmodule