serv

CAPI=2:

name : ::servant:1.0.1

filesets:
  service:
    files: [servant/ice40_pll.v, servant/service.v]
    file_type : verilogSource
    depend : ["fusesoc:utils:generators"]

  mem_files:
    files:
      - sw/blinky.hex       : {copyto : blinky.hex}
      - sw/zephyr_hello.hex : {copyto : zephyr_hello.hex}
    file_type : user

  servant_tb:
    files:
      - bench/servant_sim.v
      - "!tool_verilator? (bench/uart_decoder.v)"
      - "!tool_verilator? (bench/servant_tb.v)"
      - "tool_verilator? (bench/servant_tb.cpp)" : {file_type : cppSource}
    file_type : verilogSource
    depend : [vlog_tb_utils]

  soc:
    files:
      - servant/servant_clock_gen.v
      - servant/servant_timer.v
      - servant/servant_gpio.v
      - servant/servant_arbiter.v
      - servant/servant_mux.v
      -  "tool_quartus? (servant/servant_ram_quartus.sv)" : {file_type : systemVerilogSource}
      - "!tool_quartus? (servant/servant_ram.v)"
      - servant/servant.v
    file_type : verilogSource
    depend : [serv]

  cyc1000:
    files:
      - data/cyc1000.sdc : {file_type : SDC}
      - data/cyc1000.tcl : {file_type : tclSource}
      - servant/servclone10_clock_gen.v : {file_type : verilogSource}
      - servant/servclone10.v : {file_type : verilogSource}

  tinyfpga_bx: {files: [data/tinyfpga_bx.pcf : {file_type : PCF}]}
  icebreaker : {files: [data/icebreaker.pcf  : {file_type : PCF}]}
  alhambra   : {files: [data/alhambra.pcf : {file_type : PCF}]}

  lx9_microboard:
    files:
      - servant/servant_lx9_clock_gen.v : {file_type : verilogSource}
      - servant/servant_lx9.v : {file_type : verilogSource}
      - data/lx9_microboard.ucf : {file_type : UCF}

  nexys_a7:
    files:
      - servant/servix_clock_gen.v : {file_type : verilogSource}
      - servant/servix.v : {file_type : verilogSource}
      - data/nexys_a7.xdc : {file_type : xdc}
  arty_a7_35t:
    files:
      - servant/servix_clock_gen.v : {file_type : verilogSource}
      - servant/servix.v : {file_type : verilogSource}
      - data/arty_a7_35t.xdc : {file_type : xdc}

  pipistrello:
    files:
      - servant/servis_clock_gen.v : {file_type : verilogSource}
      - servant/servis.v : {file_type : verilogSource}
      - data/pipistrello.ucf : {file_type : UCF}

  ulx3s:
    files:
      - data/ulx3s.lpf : {file_type : LPF}
      - servant/ecppll.v : {file_type : verilogSource}
      - servant/servant_ecp5_clock_gen.v : {file_type : verilogSource}
      - servant/servant_ecp5.v : {file_type : verilogSource}

  upduino2:
    files:
      - servant/servant_upduino2.v : {file_type : verilogSource}
      - data/upduino2.pcf : {file_type : PCF}

  zcu106:
    files:
      - servant/servus_clock_gen.v : {file_type : verilogSource}
      - servant/servus.v : {file_type : verilogSource}
      - data/zcu106.xdc : {file_type : xdc}

targets:
  default:
    filesets : [soc]

  cyc1000:
    default_tool: quartus
    description: cyc1000 FPGA board
    filesets : [mem_files, soc, cyc1000]
    parameters : [memfile, memsize=32768]
    tools:
      quartus:
        family : Cyclone 10 LP
        device : 10CL025YU256C8G
    toplevel : servclone10

  icebreaker:
    default_tool : icestorm
    filesets : [mem_files, soc, service, icebreaker]
    generate: [icebreaker_pll]
    parameters : [memfile, memsize, PLL=ICE40_PAD]
    tools:
      icestorm:
        nextpnr_options: [--up5k, --freq, 16]
        pnr: next
    toplevel : service

  lx9_microboard:
    default_tool: ise
    description : LX9 Microboard
    filesets : [mem_files, soc, lx9_microboard]
    parameters : [memfile, memsize]
    tools:
      ise:
        family  : Spartan6
        device  : xc6slx9
        package : csg324
        speed   : -2
    toplevel : servant_lx9


  tinyfpga_bx:
    default_tool : icestorm
    filesets : [mem_files, soc, service, tinyfpga_bx]
    generate: [tinyfpga_bx_pll]
    parameters : [memfile, memsize, PLL=ICE40_CORE]
    tools:
      icestorm:
        nextpnr_options : [--lp8k, --package, cm81, --freq, 32]
        pnr: next
    toplevel : service

  alhambra:
    default_tool : icestorm
    description: Open-hardware iCE40HX4K FPGA board
    filesets : [mem_files, soc, service, alhambra]
    generate: [alhambra_pll]
    parameters : [memfile, memsize, PLL=ICE40_CORE]
    tools:
      icestorm:
        nextpnr_options : [--hx8k, --package, "tq144:4k", --freq, 32]
        pnr: next
    toplevel : service

  lint:
    default_tool : verilator
    filesets : [soc]
    tools:
      verilator:
        mode : lint-only
    toplevel : servant

  nexys_a7:
    default_tool: vivado
    filesets : [mem_files, soc, nexys_a7]
    parameters : [memfile, memsize, frequency=32]
    tools:
      vivado: {part : xc7a100tcsg324-1}
    toplevel : servix

  arty_a7_35t:
    default_tool: vivado
    filesets : [mem_files, soc, arty_a7_35t]
    parameters : [memfile, memsize, frequency=16]
    tools:
      vivado: {part : xc7a35ticsg324-1L}
    toplevel : servix

  pipistrello:
    default_tool: ise
    description : Saanlima pipistrello
    filesets : [mem_files, soc, pipistrello]
    parameters : [memfile, memsize]
    tools:
      ise:
        family  : Spartan6
        device  : xc6slx45
        package : csg324
        speed   : -3
    toplevel : servis

  sim:
    default_tool: icarus
    filesets : [soc, servant_tb]
    parameters :
      - RISCV_FORMAL
      - SERV_CLEAR_RAM=true
      - firmware
      - memsize
    toplevel : servant_tb

  ulx3s_85:
    default_tool: diamond
    description : ULX3S 85k version
    filesets : [mem_files, soc, ulx3s]
    parameters : [memfile, memsize]
    tools:
      diamond:
        part : LFE5U-85F-6BG381C
      trellis:
        nextpnr_options : [--package, CABGA381, --85k]
    toplevel: servant_ecp5

  upduino2:
    default_tool : icestorm
    filesets : [mem_files, soc, upduino2]
    parameters : [memfile, memsize]
    tools:
      icestorm:
        nextpnr_options: [--package, sg48, --up5k, --freq, 24]
        pnr: next
    toplevel : servant_upduino2

  verilator_tb:
    default_tool: verilator
    filesets : [soc, servant_tb]
    parameters :
      - RISCV_FORMAL
      - firmware
      - memsize
      - signature
      - timeout
      - uart_baudrate
      - vcd
      - vcd_start
    tools:
      verilator:
        verilator_options : [--trace]
    toplevel : servant_sim

  zcu106:
    default_tool: vivado
    description : Zynq UltraScale+ MPSoC ZCU106 Evaluation Kit
    filesets : [mem_files, soc, zcu106]
    parameters : [memfile, memsize]
    tools:
      vivado: {part : xczu7ev-ffvc1156-2-e}
    toplevel : servus

parameters:
  PLL:
    datatype : str
    description : PLL type to use for main clock generation
    paramtype : vlogparam

  RISCV_FORMAL:
    datatype  : bool
    paramtype : vlogdefine

  SERV_CLEAR_RAM:
    datatype  : bool
    paramtype : vlogdefine

  firmware:
    datatype : file
    description : Preload RAM with a hex file at runtime (overrides memfile)
    paramtype : plusarg

  frequency:
    datatype    : int
    description : PLL output frequency
    paramtype   : vlogparam

  memfile:
    datatype    : file
    description : Preload RAM with a hex file at compile-time
    paramtype   : vlogparam

  memsize:
    datatype    : int
    default     : 8192
    description : Memory size in bytes for RAM (default 8kiB)
    paramtype   : vlogparam

  signature:
    datatype : file
    paramtype : plusarg
  uart_baudrate:
    datatype : int
    description : Treat q output as an UART with the specified baudrate (0 or omitted parameter disables UART decoding)
    paramtype : plusarg

  timeout:
    datatype : int
    paramtype : plusarg

  vcd:
    datatype : bool
    paramtype : plusarg

  vcd_start:
    datatype    : int
    description : Delay start of VCD dumping until the specified time
    paramtype   : plusarg

generate:
  icebreaker_pll:
    generator: icepll
    parameters:
      freq_out : 16

  tinyfpga_bx_pll:
    generator: icepll
    parameters:
      freq_in  : 16
      freq_out : 32

  alhambra_pll:
    generator: icepll
    parameters:
      freq_in  : 12
      freq_out : 32