Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
##
## This CircuitPython code is designed for the Adafruit HalloWing.
## It live-plots four RTD temperature sensors from Capable Robot Components
## SenseTemp RTD Wing onto the HalloWing LCD display.
##
## Written by Chris Osterwood during the 2018 Hackaday Supercon.
## Thanks to Adafruit for providing all attendees with HalloWings!
##
## HalloWing : https://www.adafruit.com/product/3900
## SenseTemp : https://www.crowdsupply.com/capable-robot-components/sensetemp
##
## CircuitPython Imports
import time
import board
import gc
import busio
import pulseio
import digitalio
## Local Imports
import adafruit_max31865 as max31865
from adafruit_rgb_display import color565
import adafruit_rgb_display.ST7735 as ST7735
DISPLAY_PX = 128
## These temperatures are in Fahrenheit
##
## They are used to draw scale lines on
## the LCD and to map Fahrenheit values to pixel positions.
TEMP_MIN = 60
TEMP_MAX = 100
TEMP_STEP = 10
def c_to_f(value):
return float(value) * 9.0 / 5.0 + 32.0
def f_to_c(value):
return (float(value) - 32.0) * 5.0 / 9.0
RTD_NOMINAL = 1000.0 ## Resistance of RTD at 0C
RTD_REFERENCE = 4300.0 ## Value of reference resistor on PCB
spi = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
## Create the ST7735 display and make it black
display = ST7735.ST7735R(spi,
cs=digitalio.DigitalInOut(board.TFT_CS),
dc=digitalio.DigitalInOut(board.TFT_DC),
rst=digitalio.DigitalInOut(board.TFT_RESET)
)
display.fill(0)
## Create SPI Chip Select pins
cs1 = digitalio.DigitalInOut(board.D10)
cs2 = digitalio.DigitalInOut(board.D9)
cs3 = digitalio.DigitalInOut(board.D6)
cs4 = digitalio.DigitalInOut(board.D5)
css = [cs1, cs2, cs3, cs4]
sensors = []
## Create array for the RTD sensors on the SenseTemp Wing
for cs in css:
sensors.append(
max31865.MAX31865(
spi, cs,
wires = 4,
rtd_nominal = RTD_NOMINAL,
ref_resistor = RTD_REFERENCE
)
)
## Turn on the HalloWing back-light
backlight = pulseio.PWMOut(board.TFT_BACKLIGHT)
backlight.duty_cycle = 50000
## Reference temperatures to draw on the LCD
temp_grid = [TEMP_MIN]
while temp_grid[-1] < TEMP_MAX:
temp_grid.append(temp_grid[-1] + TEMP_STEP)
## Colors for the 4 RTD channels -> Red, Green, Blue, Purple
COLORMAP = [
(255, 0, 0),
(0, 255, 0),
(0, 0, 255),
(255, 0, 255)
]
## Determine vertical position for the temperature sample
def f_to_px(value):
if value < TEMP_MIN:
return 0
if value > TEMP_MAX:
return DISPLAY_PX-1
px = (value - TEMP_MIN) * DISPLAY_PX / (TEMP_MAX - TEMP_MIN)
return int(px)
## Re-draw the grid data at this position
def draw_grid_at_position(position):
## Clear all samples at this X position.
display.vline(position, 0, DISPLAY_PX, color565(0,0,0))
## Draw white points at this X position
## to re-create the temperature scale
for value in temp_grid:
y = f_to_px(value)
display.pixel(position, y, color565(255,255,255))
## Stores the last PX position for each temperature value
## this allows code to determine if new sample should be
## drawing with a point, or a line
last_px = [0,0,0,0]
def draw_temps_graph(position, data):
draw_grid_at_position(position)
for idx,value in enumerate(data):
y = f_to_px(c_to_f(value))
dy = abs(y - last_px[idx])
color = color565(*COLORMAP[idx])
if dy > 1:
ypos = min(y, last_px[idx])
display.vline(position, ypos, dy, color)
else:
display.pixel(position, y, color)
last_px[idx] = y
gc.collect()
## Draw horizontal lines as a temperature scale
for value in temp_grid:
y = f_to_px(value)
display.hline(0, y, DISPLAY_PX, color565(255,255,255))
## Start on the left side of the screen
position = DISPLAY_PX
## Advance to the next PX position, read temperature data, draw it
while True:
position -= 1
data = [sensor.temperature for sensor in sensors]
draw_temps_graph(position, data)
## We're at the end of the display, go back to the left side
if position <= 0:
position = DISPLAY_PX
ccd81f98fThis file is pinned to the selected release. Download the original to open it in your design tool.