Loading files
This file is pinned to the selected release. Download the original to open it in your design tool.
////////////////////////////////////////////////////////////////////////////////
//
// Filename: bench/cpp/sdiosim.h
// {{{
// Project: SD-Card controller
//
// Purpose:
//
// Creator: Dan Gisselquist, Ph.D.
// Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
// }}}
// Copyright (C) 2016-2026, Gisselquist Technology, LLC
// {{{
// This program is free software (firmware): you can redistribute it and/or
// modify it under the terms of the GNU General Public License as published
// by the Free Software Foundation, either version 3 of the License, or (at
// your option) any later version.
//
// This program is distributed in the hope that it will be useful, but WITHOUT
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with this program. (It's in the $(ROOT)/doc directory. Run make with no
// target there if the PDF file isn't present.) If not, see
// <http://www.gnu.org/licenses/> for a copy.
// }}}
// License: GPL, v3, as defined and found on www.gnu.org,
// {{{
// http://www.gnu.org/licenses/gpl.html
//
////////////////////////////////////////////////////////////////////////////////
//
// }}}
#ifndef SDIOSIM_H
#define SDIOSIM_H
#include <stdio.h>
#include <stdint.h>
class SDIOSIM {
static constexpr int DBUFLN = 512+2+32;
bool HCS;
FILE *m_fp;
uint32_t m_buf[512/sizeof(uint32_t)];
bool m_readonly, m_reply_active, m_open_drain, m_ddr,
m_cmd_started, m_reply_started;
bool m_data_started, m_multiblock;
uint32_t m_sector, m_data_posn;
uint32_t m_last_dat, m_last_cmd, m_lastck, m_app_cmd,
m_selected, m_RCA, m_width, m_drive, m_data_count,
m_crctoken;
char m_cmd_buf[8], m_cid[16], m_reply_buf[20],
m_dbuf[DBUFLN], m_csd[16], m_scr[8];
uint32_t m_cmd_pos, m_reply_posn, m_reply_count, m_R1,
m_reply_delay, m_data_delay, m_busy_cycles;
bool m_debug;
protected:
void init(void);
unsigned cmdbit(unsigned);
unsigned datp(unsigned);
unsigned datn(unsigned);
void accept_command(void);
void load_reply(int cmd, unsigned arg);
void appendcrc(unsigned len_bytes);
uint8_t cmdcrc(int ln, char *buf);
unsigned blockcrc(unsigned fill, unsigned bit);
void CID(void);
void CSD(void);
void SCR(void);
public:
// SDIOSIM(const unsigned lglen);
SDIOSIM(const char *fname);
void load(const unsigned addr, const char *fname);
void load(const char *fname) { load(0, fname); }
bool card_busy(void) const { return m_busy_cycles > 0; };
unsigned crctoken(void) const { return m_crctoken; };
void apply(unsigned sdclk, unsigned ddr,
unsigned cmd_en, unsigned cmd_data,
unsigned data_en, unsigned rx_en, unsigned tx_data,
unsigned &o_sync, unsigned &async_sync,
unsigned &async_data);
};
#endif
dfb16c807This file is pinned to the selected release. Download the original to open it in your design tool.