Loading files
// Copyright 2019- RSD contributors.
// Licensed under the Apache License, Version 2.0, see LICENSE for details.
//
// Schedule
//
import BasicTypes::*;
import SchedulerTypes::*;
import MicroOpTypes::*;
module Scheduler(
SchedulerIF.Scheduler port,
WakeupSelectIF.Scheduler wakeupSelect,
RecoveryManagerIF.Scheduler recovery,
MulDivUnitIF.Scheduler mulDivUnit,
FPDivSqrtUnitIF.Scheduler fpDivSqrtUnit,
DebugIF.Scheduler debug
);
// A flag that indicates a not-issued state.
// This flag contains the validness of each entry.
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] notIssued;
// The type of an op in each entry.
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isInt;
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isComplex;
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isDiv;
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isLoad;
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isStore;
`ifdef RSD_MARCH_FP_PIPE
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isFP;
logic [ISSUE_QUEUE_ENTRY_NUM-1:0] isFPDivSqrt;
`endif
IssueQueueOneHotPath flushIQ_Entry;
IssueQueueOneHotPath selectedVector;
logic dispatchStore[DISPATCH_WIDTH];
logic dispatchLoad[DISPATCH_WIDTH];
logic canIssueDiv;
`ifdef RSD_MARCH_FP_PIPE
logic canIssueFPDivSqrt;
`endif
`ifndef RSD_SYNTHESIS
`ifndef RSD_VIVADO_SIMULATION
// Don't care these values, but avoiding undefined status in Questa.
initial begin
isInt = '0;
isComplex = '0;
isDiv = '0;
isLoad = '0;
isStore = '0;
`ifdef RSD_MARCH_FP_PIPE
isFP = '0;
isFPDivSqrt = '0;
`endif
end
`endif
`endif
always_ff @(posedge port.clk) begin
if(port.rst) begin
// Reset or recovery is necessary only for notIssued flags.
for(int i = 0; i < ISSUE_QUEUE_ENTRY_NUM; i++) begin
notIssued[i] <= FALSE;
end
end
else begin
// Dispatch
for (int i = 0; i < DISPATCH_WIDTH; i++) begin
if( port.write[i] ) begin
notIssued[ port.writePtr[i] ] <= TRUE;
if (port.writeSchedulerData[i].opType == MOP_TYPE_MEM) begin
if (port.writeSchedulerData[i].opSubType.memType == MEM_MOP_TYPE_STORE) begin
// This port cannot access the data cache.
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= TRUE;
isComplex[ port.writePtr[i] ] <= FALSE;
isInt[ port.writePtr[i] ] <= FALSE;
isDiv[ port.writePtr[i] ] <= FALSE;
`ifdef RSD_MARCH_FP_PIPE
isFP[ port.writePtr[i] ] <= FALSE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
`endif
end
else begin
`ifdef RSD_MARCH_UNIFIED_MULDIV_MEM_PIPE
isComplex[ port.writePtr[i] ] <=
port.writeSchedulerData[i].opSubType.memType inside {
MEM_MOP_TYPE_MUL, MEM_MOP_TYPE_DIV
};
isDiv[ port.writePtr[i] ] <=
port.writeSchedulerData[i].opSubType.memType inside {
MEM_MOP_TYPE_DIV
};
isLoad[ port.writePtr[i] ] <=
!(port.writeSchedulerData[i].opSubType.memType inside {
MEM_MOP_TYPE_MUL, MEM_MOP_TYPE_DIV
});
`else
isDiv[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= FALSE;
isLoad[ port.writePtr[i] ] <= TRUE;
`endif
isStore[ port.writePtr[i] ] <= FALSE;
isInt[ port.writePtr[i] ] <= FALSE;
`ifdef RSD_MARCH_FP_PIPE
isFP[ port.writePtr[i] ] <= FALSE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
`endif
end
end
else if (port.writeSchedulerData[i].opType == MOP_TYPE_COMPLEX) begin
if (port.writeSchedulerData[i].opSubType.complexType ==
COMPLEX_MOP_TYPE_DIV) begin
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= TRUE;
isInt[ port.writePtr[i] ] <= FALSE;
isDiv[ port.writePtr[i] ] <= TRUE;
`ifdef RSD_MARCH_FP_PIPE
isFP[ port.writePtr[i] ] <= FALSE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
`endif
end
else begin
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= TRUE;
isInt[ port.writePtr[i] ] <= FALSE;
isDiv[ port.writePtr[i] ] <= FALSE;
`ifdef RSD_MARCH_FP_PIPE
isFP[ port.writePtr[i] ] <= FALSE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
`endif
end
end
`ifdef RSD_MARCH_FP_PIPE
else if (port.writeSchedulerData[i].opType == MOP_TYPE_FP) begin
if (port.writeSchedulerData[i].opSubType.complexType inside {FP_MOP_TYPE_DIV, FP_MOP_TYPE_SQRT}) begin
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= FALSE;
isInt[ port.writePtr[i] ] <= FALSE;
isDiv[ port.writePtr[i] ] <= FALSE;
isFP[ port.writePtr[i] ] <= TRUE;
isFPDivSqrt[ port.writePtr[i] ] <= TRUE;
end
else begin
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= FALSE;
isInt[ port.writePtr[i] ] <= FALSE;
isDiv[ port.writePtr[i] ] <= FALSE;
isFP[ port.writePtr[i] ] <= TRUE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
end
end
`endif
else begin
isLoad[ port.writePtr[i] ] <= FALSE;
isStore[ port.writePtr[i] ] <= FALSE;
isComplex[ port.writePtr[i] ] <= FALSE;
isInt[ port.writePtr[i] ] <= TRUE;
isDiv[ port.writePtr[i] ] <= FALSE;
`ifdef RSD_MARCH_FP_PIPE
isFP[ port.writePtr[i] ] <= FALSE;
isFPDivSqrt[ port.writePtr[i] ] <= FALSE;
`endif
end
end
end
// Select & issue & flush at recovery
for (int i = 0; i < ISSUE_QUEUE_ENTRY_NUM; i++) begin
if (selectedVector[i] || flushIQ_Entry[i]) begin
notIssued[i] <= FALSE;
end
end
end
end
always_comb begin
// Generate ld/st inst dispatch information for making store bit vector at producer.
for (int i = 0; i < DISPATCH_WIDTH; i++) begin
if ( port.write[i] ) begin
if (port.writeSchedulerData[i].opType == MOP_TYPE_MEM) begin
if (port.writeSchedulerData[i].opSubType.memType == MEM_MOP_TYPE_STORE) begin
// Dispatch store
dispatchStore[i] = TRUE;
dispatchLoad[i] = FALSE;
end
else begin
// Dispatch load
dispatchStore[i] = FALSE;
dispatchLoad[i] = TRUE;
end
end
else begin
// Not dispatch ld/st inst.
dispatchStore[i] = FALSE;
dispatchLoad[i] = FALSE;
end
end
else begin
// Not dispatch inst.
dispatchStore[i] = FALSE;
dispatchLoad[i] = FALSE;
end
end
// Connect dispatch/IQ info to IF
wakeupSelect.dispatchStore = dispatchStore;
wakeupSelect.dispatchLoad = dispatchLoad;
wakeupSelect.notIssued = notIssued;
// Controll logic
wakeupSelect.stall = port.stall;
// Dispatch
wakeupSelect.write = port.write;
wakeupSelect.writePtr = port.writePtr;
wakeupSelect.memDependencyPred = port.memDependencyPred;
flushIQ_Entry = recovery.flushIQ_Entry;
recovery.notIssued = notIssued;
for ( int i = 0; i < DISPATCH_WIDTH; i++ ) begin
// wakeupSelect.writeSrcTag
wakeupSelect.writeSrcTag[i].regTag[0].valid = port.writeSchedulerData[i].srcRegValidA;
wakeupSelect.writeSrcTag[i].regTag[1].valid = port.writeSchedulerData[i].srcRegValidB;
`ifdef RSD_MARCH_FP_PIPE
wakeupSelect.writeSrcTag[i].regTag[2].valid = port.writeSchedulerData[i].srcRegValidC;
`endif
wakeupSelect.writeSrcTag[i].regTag[0].num = port.writeSchedulerData[i].opSrc.phySrcRegNumA;
wakeupSelect.writeSrcTag[i].regTag[1].num = port.writeSchedulerData[i].opSrc.phySrcRegNumB;
`ifdef RSD_MARCH_FP_PIPE
wakeupSelect.writeSrcTag[i].regTag[2].num = port.writeSchedulerData[i].opSrc.phySrcRegNumC;
`endif
// wakeupSelect.writeSrcTag
wakeupSelect.writeDstTag[i].regTag.valid = port.writeSchedulerData[i].opDst.writeReg;
wakeupSelect.writeDstTag[i].regTag.num = port.writeSchedulerData[i].opDst.phyDstRegNum;
// Source pointers to a matrix.
wakeupSelect.writeSrcTag[i].regPtr[0].valid = port.writeSchedulerData[i].srcRegValidA;
wakeupSelect.writeSrcTag[i].regPtr[1].valid = port.writeSchedulerData[i].srcRegValidB;
`ifdef RSD_MARCH_FP_PIPE
wakeupSelect.writeSrcTag[i].regPtr[2].valid = port.writeSchedulerData[i].srcRegValidC;
`endif
wakeupSelect.writeSrcTag[i].regPtr[0].ptr = port.writeSchedulerData[i].srcPtrRegA;
wakeupSelect.writeSrcTag[i].regPtr[1].ptr = port.writeSchedulerData[i].srcPtrRegB;
`ifdef RSD_MARCH_FP_PIPE
wakeupSelect.writeSrcTag[i].regPtr[2].ptr = port.writeSchedulerData[i].srcPtrRegC;
`endif
end
// Check whether div can be issued
// For stop issuing div according to the status of the divider
canIssueDiv = TRUE;
for (int i = 0; i < MULDIV_ISSUE_WIDTH; i++) begin
if (!mulDivUnit.divFree[i]) begin
canIssueDiv = FALSE; // Currently, only a single div can be issued
end
end
`ifdef RSD_MARCH_FP_PIPE
canIssueFPDivSqrt = TRUE;
for (int i = 0; i < FP_ISSUE_WIDTH; i++) begin
if (!fpDivSqrtUnit.Free[i]) begin
canIssueFPDivSqrt = FALSE; // Currently, only a single div/sqrt can be issued
end
end
`endif
// Select
for(int i = 0; i < ISSUE_QUEUE_ENTRY_NUM; i++) begin
wakeupSelect.intIssueReq[i] = notIssued[i] && isInt[i];
`ifdef RSD_MARCH_UNIFIED_MULDIV_MEM_PIPE
wakeupSelect.loadIssueReq[i] = // mul/div is integrated into a load pipeline
notIssued[i] && (
isLoad[i] ||
(isComplex[i] && (!isDiv[i] || (isDiv[i] && canIssueDiv)))
);
`else
wakeupSelect.loadIssueReq[i] = notIssued[i] && isLoad[i];
wakeupSelect.complexIssueReq[i] =
notIssued[i] && isComplex[i] && (!isDiv[i] || (isDiv[i] && canIssueDiv));
`endif
wakeupSelect.storeIssueReq[i] = notIssued[i] && isStore[i];
`ifdef RSD_MARCH_FP_PIPE
wakeupSelect.fpIssueReq[i] =
notIssued[i] && isFP[i] && (!isFPDivSqrt[i] || (isFPDivSqrt[i] && canIssueFPDivSqrt));
`endif
end
for ( int i = 0; i < ISSUE_WIDTH; i++ ) begin
port.selected[i] = wakeupSelect.selected[i] && !port.stall;
port.selectedPtr[i] = wakeupSelect.selectedPtr[i];
end
selectedVector = '0;
if (!port.stall) begin
for (int i = 0; i < ISSUE_WIDTH; i++) begin
selectedVector |= wakeupSelect.selectedVector[i];
end
end
// Debug Register
`ifndef RSD_DISABLE_DEBUG_REGISTER
for ( int i = 0; i < ISSUE_QUEUE_ENTRY_NUM; i++ ) begin
`ifndef RSD_MARCH_FP_PIPE
debug.scheduler[i].valid = notIssued[i] && (isInt[i] || isComplex[i] || isLoad[i] || isStore[i]);
`else
debug.scheduler[i].valid = notIssued[i] && (isInt[i] || isComplex[i] || isLoad[i] || isStore[i] || isFP[i]);
`endif
end
`endif
end
endmodule : Scheduler
dbfa8e081This file is pinned to the selected release. Download the original to open it in your design tool.