Loading files
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
old mode 100644
new mode 100755
index b9df9b3..3a121dd
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -19,11 +19,11 @@
memory@0 {
device_type = "memory";
- reg = <0x0 0x20000000>;
+ reg = <0x0 0x10000000>;
};
chosen {
- bootargs = "";
+ bootargs = "mem=256M uio_pdrv_genirq.of_id=generic-uio";
stdout-path = "serial0:115200n8";
};
diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
old mode 100644
new mode 100755
index 20bbb7b..c9781d2
--- a/configs/zynq_zed_defconfig
+++ b/configs/zynq_zed_defconfig
@@ -66,3 +66,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_THOR=y
+CONFIG_OF_EMBED=y
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
old mode 100644
new mode 100755
index 9494267..b40e097
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -286,8 +286,7 @@
"echo Copying Linux from SD to RAM... && " \
"load mmc 0 ${kernel_load_address} ${kernel_image} && " \
"load mmc 0 ${devicetree_load_address} ${devicetree_image} && " \
- "load mmc 0 ${ramdisk_load_address} ${ramdisk_image} && " \
- "bootm ${kernel_load_address} ${ramdisk_load_address} ${devicetree_load_address}; " \
+ "bootm ${kernel_load_address} - ${devicetree_load_address}; " \
"fi\0" \
"usbboot=run xilinxcmd && if usb start; then " \
"run uenvboot; " \
diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l
--- a/scripts/dtc/dtc-lexer.l
+++ b/scripts/dtc/dtc-lexer.l
@@ -38,7 +38,7 @@
#include "srcpos.h"
#include "dtc-parser.tab.h"
-YYLTYPE yylloc;
+
extern bool treesource_error;
/* CAUTION: this will stop working if we ever use yyless() or yyunput() */
dbfa8e081This file is pinned to the selected release. Download the original to open it in your design tool.